NXP-MCUBootUtility v6.3.0 release note

Features:

1. [RT] Can support parsing ROM boot log
   [RT] 可以支持获取并解析ROM启动日志

Improvements:

1. [RT] Can set range erase alignment for FlexSPI NOR device
   [RT] 对FlexSPI NOR设备做擦除时，可自定义对齐长度
2. [RT1170] Add support for Infineon octal flash S28H
   [RT1170] 增加对英飞凌S28H系列Octal Flash支持

NXP-MCUBootUtility v6.2.0 release note

Features:

1. [RT700] Support boot device connected to secondary XSPI
   [RT700] 支持下载程序进第二个XSPI上连接的启动设备

Bugfixes:

1. [RT700] Fix download error when FDCB area in NOR flash is not blank
   [RT700] 当NOR Flash的FDCB区域非空时，下载可能报错
2. [RT700] Fix support for Non-XIP image when it is linked in secure SRAM
   [RT700] 当待下载程序链接在安全SRAM地址时，下载会报错

NXP-MCUBootUtility v6.1.0 release note

Features:

1. [RTxxx] Support i.MXRT700 A0
   [RTxxx] 支持i.MXRT700 A0
2. [RT700] Support raw app file(not bootable app) as source image
   [RT700] 支持裸应用程序文件作为输入源文件
3. [RT700] Support both UART and USB-HID download modes
   [RT700] 支持UART和USB-HID两种下载方式（COM端口/USB设备自动识别）
4. [RT700] Support development boot case (Unsigned)
   [RT700] 支持用于开发阶段的非安全加密启动（未签名）
5. [RT700] Support XSPI NOR boot device
   [RT700] 支持XSPI NOR启动设备

NXP-MCUBootUtility v6.0.0 release note

Features:

1. [Wireless] Support K32W0x1
   [Wireless] 支持K32W0x1
2. [Wireless] Support RW61x
   [Wireless] 支持RW61x
3. [RW61x] Support raw app file(not bootable app) as source image
   [RW61x] 支持裸应用程序文件作为输入源文件
4. [RW61x] Support both UART and USB-HID download modes
   [RW61x] 支持UART和USB-HID两种下载方式（COM端口/USB设备自动识别）
5. [RW61x] Support development boot case (Unsigned)
   [RW61x] 支持用于开发阶段的非安全加密启动（未签名）
6. [RW61x] Support FlexSPI NOR boot device
   [RW61x] 支持FlexSPI NOR启动设备

Bugfixes:

1. [RTyyyy] Fix support for 2nd FlexSPI NOR instance
   [RTyyyy] 修复对第二个FlexSPI NOR设备的下载支持
2. [RTxxx] Fix support for FlexSPI NOR device
   [RTxxx] 修复对FlexSPI NOR设备的下载支持

NXP-MCUBootUtility v5.3.2 release note

Improvement:

1. [RTyyyy] Add XMCD support for RT1180
   [RTyyyy] 使能 RT1180 的 XMCD 支持

Bugfixes:

1. [RTyyyy] XMCD write dummy cycles setting doesn't take affect
   [RTyyyy] XMCD配置界面里write dummy cycle设置不生效

NXP-MCUBootUtility v5.3.1 release note

Improvements:

1. [RT] Can validate the xip region range of different FlexSPI instance
   [RT] 可以检查不同FlexSPI序号的有效XIP范围
2. [RTxxx] Can recognize Non-XIP image which is linked in FlexSPI RAM region
   [RTxxx] 可以识别链接在FlexSPI RAM区域的程序

Bugfixes:

1. [RT1180] Cannot generate bootable image for some Non-XIP images under FlexSPI NOR
   [RT1180] 在FlexSPI NOR启动设备下无法生成一些Non-XIP程序的可启动程序

NXP-MCUBootUtility v5.3.0 release note

Features:

1. [RTyyyy] Support XMCD which can help configure FlexSPI RAM/SEMC SDRAM
   [RTyyyy] 支持XMCD配置功能，可用于加载image进FlexSPI RAM/SEMC SDRAM执行
2. [RTyyyy] Support secondary FlexSPI instance for NAND boot
   [RTyyyy] 支持第二个FlexSPI去下载启动NAND
3. [RT] Add FlexSPI NAND device model support
   [RT] 新增FlexSPI NAND启动设备模型支持

Improvements:

1. [RTyyyy] Change FlexSPI instance selection from menu to config win
   [RTyyyy] 将FlexSPI序号选择从菜单栏改至设备配置界面
2. [RTyyyy] Can recognize Non-XIP image which is linked in FlexSPI RAM region
   [RTyyyy] 可以识别链接在FlexSPI RAM区域的程序

Bugfixes:

1. [RTyyyy] Cannot recognize bootable image which offset of reset handler to vector is less than 0xB00
   [RTyyyy] 无法识别IVT中复位函数地址相对向量表首地址偏移小于0xB00的可启动程序文件

NXP-MCUBootUtility v5.2.1 release note

Bugfix:

1. [RTyyyy] Fix support for FlexSPI NAND device
   [RTyyyy] 修复对FlexSPI NAND设备的下载支持（实测了Winbond/MXIC/GD）

NXP-MCUBootUtility v5.2.0 release note

Features:

1. [RTyyyy] Support i.MXRT118x B0
   [RTyyyy] 支持i.MXRT118x B0
2. [RT] Support both secure and non-secure addr CM33 image for FlexSPI NOR device
   [RT] 对于FlexSPI NOR设备，支持下载安全与非安全两种地址链接的CM33程序
3. [RT] Support aliased addr image for FlexSPI NOR device
   [RT] 对于FlexSPI NOR设备，支持别名地址链接的程序

Improvements:

1. [RT1180] Original image can be a bootable image (with Container)
   [RT1180] 用户输入的源程序文件可以包含启动头 (Container)

NXP-MCUBootUtility v5.1.0 release note

Feature:

1. [RT1180] Support edgelock FW
   [RT1180] 支持自动加载Edgelock固件