AstoCAD Forms page; units, trimmed export and trim3dm fix notes - New AstoCAD-Forms page: what AstoCAD and Forms are, importForms3DM, Rhino SubD logo example, Forms round-trip test cases - Home: AstoCAD section, model units, page list - Trimmed-Surfaces: trimmed-Brep export via trim3dm, importer routing, trim3dm duplicate-face fix - Serpentine-Gallery: area cross-check measured on the native trim path
Serpentine gallery: full 0.10.7 area sweep — 0 files low (was 17)
Serpentine gallery: Serpentine3D 0.10.7 + import3DM trimmed-face fix, #34 area cross-check
Serpentine gallery: update for 0.10.3; archive 0.9.0 page Six previously-failing imports now open on 0.10.3 (seam-face and Rhino-point fixes, issue #10); layer/object visibility now honoured. Preserve the 0.9.0 run as Serpentine-Gallery-0.9.0.
Import gallery: HumanHead1 V1/V3 regain full head surface Face-level fallback (untrimmed-full) recovers the merged head/neck face that was dropped by the untrimmed-ratio guard; V1/V3 heads now match V2.
Serpentine Gallery page + refreshed import images - New Serpentine-Gallery page: side-by-side check of the sample imports against Serpentine3D 0.9.0 (white viewport, Rhino-hidden layers hidden), link to the repo's interactive serpentine_gallery, and details of the six files Serpentine could not import (v4_Gear, v4_RhinoPhone, v4_Wheel_PG, v5_ring, v5_clip, v5_disk_brake) - Refresh import gallery images after import3DM fixes (layer visibility with the trim3dm path; open-profile extrusion sweep; point markers)
Gallery: regenerate with hybrid trim3dm import (HumanHead fixed) Thumbnails re-rendered with the hybrid importer: trimmed Breps now import via the trim3dm enhanced reader (real 2D trim data) while curves/meshes/points import natively - restores the missing surfaces in v1/v2/v3_HumanHead1 and keeps mixed files complete.
Ignore .DS_Store (macOS); untrack any accidentally committed ones
Gallery + pages: imports now use the single importer with auto trim3dm - Regenerate thumbnails with the current importer: Brep-only trimmed files (TreeFrog, ring, DVDCase, DinerMug, ...) import via the trim3dm enhanced reader, so v4_TreeFrog shows both eyes and complete geometry - Home/Trimmed-Surfaces pages describe the single '3DM' import type and its automatic trim3dm support (SUPPORTED / NOT SUPPORTED - build) message
Remove stray .DS_Store
Wiki: regenerate import gallery with import3DM 0.5.0 fixes - Refresh all 138 sample thumbnails (incl. new v5_ring.png) rendered with the fixed import3DM (points visible, off-layer construction hidden, guarded sew) - spot-light files now show their 20x20 plane; empty/view-only files show a 'No geometry to import' placeholder - v5_extrusions shows extruded solids; Camera/Soccer clutter removed - Pages updated: Home, Import-Gallery (v5_ring image + fixed-issue notes), Gallery-Utility (pref pinning, point anchors, placeholders), Trimmed-Surfaces (guarded sew)
Wiki: link Known import issues to GitHub issues #4-#10
Import wiki: Home, Import Gallery (V1-V6, 137 imports), Gallery Utility, Trimmed Surfaces
Initial Home page