You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
Help identifying EFS300 temperature functionality – ENGO EREL-16ZB
#33683
I am looking for assistance with integrating the external temperature sensor functionality of the ENGO EREL-16ZB Zigbee relay into Zigbee2MQTT.
The device is already recognised through the generic TS0002 definition and its basic relay functionality works. However, the external EFS300 temperature sensor connected to terminals S1/S2 is not exposed or reporting any temperature values.
Device information
Brand: ENGO Controls
Product: EREL-16ZB
Product code: 932253961
Zigbee model: TS0002
Manufacturer: _TZ3218_sfjr4fnz
Device type: Router
Zigbee2MQTT: 2.14.3
zigbee-herdsman-converters: 26.125.0
zigbee-herdsman: 11.2.0
Interview information
Input/server clusters:
genBasic
genIdentify
genGroups
genScenes
genOnOff
manuSpecificTuya3
manuSpecificTuya4
Output/client clusters:
genTime
genOta
The Zigbee2MQTT definition currently exposes the usual TS0002 functionality, including relay switching, countdown, power-on behaviour, switch type, backlight, indicator and inching settings.
What has been tested
The EFS300 is physically connected to S1/S2.
The relay pairs successfully with Zigbee2MQTT.
Basic relay switching works.
No temperature entity or temperature reports appear in Zigbee2MQTT.
Debug logging has been enabled, but no temperature-related reports have been observed.
Reading some manufacturer-specific attributes works, while other reads return ZCL command errors.
The manuSpecificTuya3 attribute switchType currently reads as 0. Writing values 1–4 did not activate temperature functionality.
The generated generic external definition only identifies standard functionality and does not provide the missing temperature support.
Expected functionality
ENGO's documentation states that the EREL-16ZB supports an EFS300 external temperature sensor.
The ENGO manual describes activating it through:
Settings → Switch type setting → Temperature sensor.
The measured temperature should then appear in the ENGO application.
I would like to achieve equivalent functionality locally through Zigbee2MQTT, without an ENGO gateway or cloud dependency.
Assistance requested
Could someone help identify:
How the EREL-16ZB activates its EFS300 temperature input over Zigbee.
Whether temperature is transmitted through a Tuya datapoint, manufacturer-specific attribute, command or another mechanism.
Whether the relevant commands or datapoint mappings are already known.
Whether a custom converter can expose the measured temperature and sensor-mode configuration.
I am happy to collect additional debug logs, perform safe diagnostic tests and provide further device information.
I am not an experienced Zigbee developer, so guidance on the required diagnostic steps would be greatly appreciated.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
Uh oh!
There was an error while loading. Please reload this page.
Hello,
I am looking for assistance with integrating the external temperature sensor functionality of the ENGO EREL-16ZB Zigbee relay into Zigbee2MQTT.
The device is already recognised through the generic TS0002 definition and its basic relay functionality works. However, the external EFS300 temperature sensor connected to terminals S1/S2 is not exposed or reporting any temperature values.
Device information
TS0002_TZ3218_sfjr4fnzInterview information
Input/server clusters:
genBasicgenIdentifygenGroupsgenScenesgenOnOffmanuSpecificTuya3manuSpecificTuya4Output/client clusters:
genTimegenOtaThe Zigbee2MQTT definition currently exposes the usual TS0002 functionality, including relay switching, countdown, power-on behaviour, switch type, backlight, indicator and inching settings.
What has been tested
manuSpecificTuya3attributeswitchTypecurrently reads as0. Writing values 1–4 did not activate temperature functionality.Expected functionality
ENGO's documentation states that the EREL-16ZB supports an EFS300 external temperature sensor.
The ENGO manual describes activating it through:
Settings → Switch type setting → Temperature sensor.
The measured temperature should then appear in the ENGO application.
I would like to achieve equivalent functionality locally through Zigbee2MQTT, without an ENGO gateway or cloud dependency.
Assistance requested
Could someone help identify:
I am happy to collect additional debug logs, perform safe diagnostic tests and provide further device information.
I am not an experienced Zigbee developer, so guidance on the required diagnostic steps would be greatly appreciated.
Thank you!
All reactions