Test Pattern

Test pattern

OpenIMP can feed a synthetic picture of known content into the pipeline (or switch the sensor's own test pattern on), so encoder, scaler, rotation, JPEG, IVS and ISP can be checked against an ideal picture without a scene. Extension beyond the vendor IMP API, default off, all SoCs.

Mode	Picture	Covers
0	off	-
1	ramp, checkerboard, colour bars, logo	after the ISP: scaler, rotation, OSD, encoder, JPEG
2	mode 1 + moving square + frame counter	drops, duplicates, reordering, smearing, rate control
3	grey, noise, counter, objects of given size/contrast/speed	motion detection (IVS input)
4	the sensor's own test pattern	through the whole ISP (AE/AWB hold optional)

Use: OpenIMP_TestPattern_Set(mode, &params) / _Get from openimp_testpattern.h (ABI 1, detect with OpenIMP_Cap_TestPattern), from outside with OPENIMP_TEST_PATTERN_CTL=<socket> and tpctl set <mode> key=value ... (e.g. tpctl set 4 ae_hold=1 awb_hold=1), start value OPENIMP_TEST_PATTERN. timps 1.10.3+ offers it as /control testpattern and WebUI buttons. Host tools compare decoded streams with the ideal picture (PSNR, SSIM, colour bars, counter, position).

Status per SoC

✅ device-tested, 🔧 implemented, untested, ⏳ in progress, ❌ not possible per hardware test, ❓ open

Function	T10	T20	T21	T23	T30	T31	T40	T41
Mode 1 pattern	✅	✅	✅	✅	🔧	✅	✅	✅
Mode 2 moving	✅	🔧	✅	✅	🔧	✅	✅	🔧
Mode 3 motion test	✅ (objects shown)	🔧	✅	✅	🔧	✅	✅	🔧
Mode 4 sensor pattern	🔧 (jxh42)	✅	✅ (sensor exposure hold)	✅	🔧	🔧 (register by hand ✅)	⏳	🔧 sc5336 / ❓ gc5603
Own picture before the ISP	🔧 Apical TPG	✅ Apical TPG + VIC colour bars (register level)	❌	❌	🔧 Apical TPG	❌	❓	⏳ RAW from DDR

Known limits: static appearing objects in mode 3 are not detected by design (motion v2 ignores them), objects larger than a grid cell (> 60 px at 640x360) are not drawn, jxf23 needs the AE hold, gc5603 has no known pattern register, the motion test has no real sensor noise. Cost: about +8 KB xz on libimp.

Full description: docs/TESTPATTERN.md.