Xplora® Watch Version 2 integration for Home Assistant
⚠️ back up your Homeassistant instance⚠️ save your backup externally- Preparation
- 👥There is more than one Xplora® Watch user logged into the Homeassistant instance
- 🗑️remove the user that is generating the error
Platform xplora_watch does not generate unique IDs. - 🗑️remove the sensors that are listed as unavailable
- restart Homeassistant
- 🗑️remove the user that is generating the error
- 👤There is only one user for Xplora® Watch who is logged into the Homeassistant instance
- no further steps necessary
- 👥There is more than one Xplora® Watch user logged into the Homeassistant instance
- Upgrade the integration and restart Homeassistant instance
- Two instances (or more) of Xplora® Watch are now displayed - click on
2 devices
- an instance with your name at the beginning is the new instance
- click on the old instance
- Go to the pen in the upper right corner
- disable this device
- (optional for more than one user)
- add the second user
ADD DEVICE
- add the second user
- Follow-up
- new entities are created or old ones are listed as unavailable
- the old entities can be removed
- note that the new entities have a new naming convention
binary_sensor:
"Watch Name" "Watch" "Charging" "Watch ID"to"Watch Name" "Watch" "Charging" "(Username)""Watch Name" "Watch" "Safezone" "Watch ID"to"Watch Name" "Watch" "Safezone" "(Username)""Watch Name" "Watch" "State" "Watch ID"to"Watch Name" "Watch" "State" "(Username)"
device_tracker:
"Watch Name" "Watch" "Tracker" "Watch ID"to"Watch Name" "Watch" "Tracker" "(Username)""Safzone" "Safzone Name" "Watch ID"to"Watch Name" "Watch" "Safzone" "Safzone Name" "(Username)"
sensor:
"Watch Name" "Watch" "Battery" "Watch ID"to"Watch Name" "Watch" "Battery" "(Username)""Watch Name" "Watch" "Xcoin" "Watch ID"to"Watch Name" "Watch" "Xcoin" "(Username)""Watch Name" "Watch" "Step Day" "Watch ID"to"Watch Name" "Watch" "Step Day" "(Username)""Watch Name" "Watch" "Message" "Watch ID"to"Watch Name" "Watch" "Message" "(Username)""Watch Name" "Watch" "Distance" "Watch ID"to"Watch Name" "Watch" "Distance" "(Username)"
switch:
"Watch Name" "Watch" "Alarm" "Time" "Watch ID"to"Watch Name" "Watch" "Alarm" "Time" "(Username)""Watch Name" "Watch" "Silent" "Time" "Watch ID"to"Watch Name" "Watch" "Silent" "Time" "(Username)"
- Control your watch from Home Assistant
- Receive notifications from your watch
- Track your watch's location
- View your watch's battery level
- And more!
IMPORTANCE: Of a service is activated by automation, the sensors will no longer be updated. Therefore, activate the xplora_watch.see service with a corresponding interval.
| Features | Type |
|---|---|
| Battery | Sensor |
| Watch-Xcoin | Sensor |
| Watch Step per Day | Sensor |
| Watch Online state | Binary Sensor |
| Watch is in Safezone | Binary Sensor |
| charging state | Binary Sensor |
| Watch silent(s) | Switch |
| Watch alarm(s) | Switch |
| Send Message | Notify |
| Send Message Service | Service |
| Read Messages from Account | Service |
| Delete Messages from App | Service |
| Manually update | Service |
| Turn off Watch | Service |
| Watch Tracking | Device Tracker |
| Watch Show Safezone(s) | Device Tracker |
Copy the xplora_watch last Release folder and all of its contents into your Home Assistant's custom_components folder. This folder is usually inside your /config folder. If you are running Hass.io, use SAMBA to copy the folder over. If you are running Home Assistant Supervised, the custom_components folder might be located at /usr/share/hassio/homeassistant. You may need to create the custom_components folder and then copy the localtuya folder and all of its contents into it. Alternatively, you can install localtuya through HACS by adding this repository.
- Ensure that HACS is installed.
- Search for and install the "Xplora® Watch Integration" integration.
- Configuration for the "Xplora® Watch Version 2" integration is now performed via a config flow as opposed to yaml configuration file.
- Go to HACS -> Integrations -> Click "+"
- Search for "Xplora® Watch" repository and add to HACS
- Restart Home Assistant when it says to.
- In Home Assistant, go to Configuration -> Integrations -> Click "+ Add Integration"
- Search for "Xplora® Watch" and follow the instructions to setup.
Xplora® should now appear as a card under the HA Integrations page with "Configure" selection available at the bottom of the card.
| add in Version 2.2.0 | add in Version 2 |
|---|---|
 |
 |
- To deactivate the scan interval you can set the value to "0", the default value is 180.
- All voice messages, videos and images are stored in
config/www/{voice|video|image|}. #152- The voice message will be downloaded as amr and converted to mp3.
- Videos as mp4
- Images as jpeg
- updated Markdown Card Sample #155
- new service added - delete only app message
- chats: add
delete_flag1= message is deleted - updated Markdown Card Sample
- add Emoji
- M1001 = "😄"
- M1002 = "😏"
- M1003 = "😘"
- M1004 = "😅"
- M1005 = "😂"
- M1006 = "😭"
- M1007 = "😍"
- M1008 = "😎"
- M1009 = "😜"
- M1010 = "😳"
- M1011 = "🥱"
- M1012 = "👏"
- M1013 = "😡"
- M1014 = "👍"
- M1015 = "😏"
- M1016 = "😓"
- M1017 = "🍧"
- M1018 = "😮"
- M1019 = "M1019"
- M1020 = "🎁"
- M1021 = "M1021"
- M1022 = "
☺️ " - M1023 = "M1023"
- M1024 = "🌹"
- A new (message) sensor has been added, default: disabled
- new service added, (message) sensor will be updated
- change Number of Messages option find in "Configure"
- Markdown Card Sample (updated v2.6.0)
- Automation Sample
- DE
- EN
Manually update all information from your watch
Set Friendly Name Please note that this can also change the entry_id!
Rule format: watchID=New Name Notice the equals sign
Set Target with the WatchID for the receiver watch
messagetargetdatauser_id
service: notify.xplora_watch
data:
message: Message
data:
user_id: 053eb6e5e5b32e502cfb1934cefb77ff
target: 01102f442f1125f525f5f3336316068
logger:
logs:
custom_components.xplora_watch: debug