Releases: Lyall/P3RFix
v1.2.1
What's Changed
- Better mouse support in free/dungeon cam by @slapjd in #44
This is disabled by default inP3RFix.ini
, so check the config file to give it at try if you're using mouse and keyboard!
New Contributors
Installation
- Download the file marked
P3RFix_v1.2.1_Steam.zip
orP3RFix_v1.2.1_Xbox.zip
from the "Assets" section below. - Extract the contents of the release zip in to the the game's binary folder.
(e.g. "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store or "steamapps\common\P3R" for Steam).
Steam Deck/Linux Additional Instructions
🚩You do not need to do this if you are using Windows!
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Installing P3RFix as a Reloaded II Mod
This applies to both Windows and Steam Deck/Linux
Before starting, make sure to delete any P3RFix files inside of the game's files if you have already have used this fix previously (P3RFix.ini, P3RFix.asi, dsound.ini and dsound.dll)
To make sure P3RFix loads alongside any Reloaded II mods you are using, follow these steps:
-
Install the P3RFix Reloaded-II package.
-
Drag and drop
P3RFix_Reloaded-II.zip
onto the Reloaded-II window. (Alternatively: Manual Install) -
Enable it in your
Reloaded-II
mod list. -
You should now be able to start the game and see both P3RFix and Reloaded II mods working.
Configuration
- See P3RFix.ini to adjust settings for the fix.
v1.2.0
What's Changed
New Contributors
Installation
- Download the file marked
P3RFix_v1.2.0_Steam.zip
orP3RFix_v1.2.0_Xbox.zip
from the "Assets" section below. - Extract the contents of the release zip in to the the game's binary folder.
(e.g. "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store or "steamapps\common\P3R" for Steam).
Steam Deck/Linux Additional Instructions
🚩You do not need to do this if you are using Windows!
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Installing P3RFix as a Reloaded II Mod
This applies to both Windows and Steam Deck/Linux
Before starting, make sure to delete any P3RFix files inside of the game's files if you have already have used this fix previously (P3RFix.ini, P3RFix.asi, dsound.ini and dsound.dll)
To make sure P3RFix loads alongside any Reloaded II mods you are using, follow these steps:
-
Install the P3RFix Reloaded-II package.
-
Drag and drop
P3RFix_Reloaded-II.zip
onto the Reloaded-II window. (Alternatively: Manual Install) -
Enable it in your
Reloaded-II
mod list. -
You should now be able to start the game and see both P3RFix and Reloaded II mods working.
Configuration
- See P3RFix.ini to adjust settings for the fix.
v1.1.7
What's Changed
- Fixed issue where conversation log would be empty if using intro skip for real this time. (#32)
Installation
- Download the file marked
P3RFix_v1.1.7_Steam.zip
orP3RFix_v1.1.7_Xbox.zip
from the "Assets" section below. - Extract the contents of the release zip in to the the game's binary folder.
(e.g."steamapps\common\P3R" for Steam or "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store).
If you want to use Reloaded II mods alongside P3RFix
This applies to both Windows and Steam Deck/Linux
Note: Reloaded II might not work if you use the Game Pass/MS Store version of P3R (see this page if you want help with that) so it's recommended to only follow these steps if you are using the Steam version.
Before starting, make sure to delete any P3RFix files inside of the game's files if you have already have used this fix previously (P3RFix.ini, P3RFix.asi, dsound.ini and dsound.dll)
To make sure P3RFix loads alongside any Reloaded II mods you are using, follow these steps:
- Set up Reloaded II and enable any mods you want as per the instructions on GameBanana.
- In Reloaded II go to Edit Application, Advanced Tools & Options, Deploy ASI Loader.
- Once this is done, open the game's binary folder (e.g. "steamapps\common\P3R\P3R\Binaries\Win64" for Steam).
- You should see a scripts folder which Reloaded II created when deploying the ASI Loader.
- Move P3RFix.asi into this folder.
- You should now be able to start the game and see both P3RFix and Reloaded II mods working.
Steam Deck/Linux Additional Instructions
🚩You do not need to do this if you are using Windows!
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Configuration
- See P3RFix.ini to adjust settings for the fix.
v1.1.6
What's Changed
- Fixed issue with the pause on focus loss patch that would cause effects to stay on screen. (#35)
- Fixed issue where all out attack results screens were display at the wrong aspect ratio. (#37)
- Fixed issue where conversation log would be empty if using intro skip. (#32)
Installation
- Download the file marked
P3RFix_v1.1.6_Steam.zip
orP3RFix_v1.1.6_Xbox.zip
from the "Assets" section below. - Extract the contents of the release zip in to the the game's binary folder.
(e.g."steamapps\common\P3R" for Steam or "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store).
If you want to use Reloaded II mods alongside P3RFix
This applies to both Windows and Steam Deck/Linux
Note: Reloaded II might not work if you use the Game Pass/MS Store version of P3R (see this page if you want help with that) so it's recommended to only follow these steps if you are using the Steam version.
Before starting, make sure to delete any P3RFix files inside of the game's files if you have already have used this fix previously (P3RFix.ini, P3RFix.asi, dsound.ini and dsound.dll)
To make sure P3RFix loads alongside any Reloaded II mods you are using, follow these steps:
- Set up Reloaded II and enable any mods you want as per the instructions on GameBanana.
- In Reloaded II go to Edit Application, Advanced Tools & Options, Deploy ASI Loader.
- Once this is done, open the game's binary folder (e.g. "steamapps\common\P3R\P3R\Binaries\Win64" for Steam).
- You should see a scripts folder which Reloaded II created when deploying the ASI Loader.
- Move P3RFix.asi into this folder.
- You should now be able to start the game and see both P3RFix and Reloaded II mods working.
Steam Deck/Linux Additional Instructions
🚩You do not need to do this if you are using Windows!
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Configuration
- See P3RFix.ini to adjust settings for the fix.
v1.1.5
What's Changed
- Updated network skip pattern so that it works on the Steam version. (#34)
- Made changes to logging and config file paths so they are more consistent.
- If P3RFix fails to locate the config file, it will spawn a console window to tell you.
- Updated release workflow to create two separate artifacts for Steam and Xbox.
This is primarily to reduce confusion from having both a "WinGDK" and "Win64" folder in the same zip.
Now you can just choose the appropriate zip for your platform instead.
Installation
- Download the file marked
P3RFix_v1.1.5_Steam.zip
orP3RFix_v1.1.5_Xbox.zip
from the "Assets" section below. - Extract the contents of the release zip in to the the game's binary folder.
(e.g."steamapps\common\P3R" for Steam or "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store).
If you want to use Reloaded II mods alongside P3RFix
This applies to both Windows and Steam Deck/Linux
Note: Reloaded II might not work if you use the Game Pass/MS Store version of P3R (see this page if you want help with that) so it's recommended to only follow these steps if you are using the Steam version.
Before starting, make sure to delete any P3RFix files inside of the game's files if you have already have used this fix previously (P3RFix.ini, P3RFix.asi, dsound.ini and dsound.dll)
To make sure P3RFix loads alongside any Reloaded II mods you are using, follow these steps:
- Set up Reloaded II and enable any mods you want as per the instructions on GameBanana.
- In Reloaded II go to Edit Application, Advanced Tools & Options, Deploy ASI Loader.
- Once this is done, open the game's binary folder (e.g. "steamapps\common\P3R\P3R\Binaries\Win64" for Steam).
- You should see a scripts folder which Reloaded II created when deploying the ASI Loader.
- Move P3RFix.asi into this folder.
- You should now be able to start the game and see both P3RFix and Reloaded II mods working.
Steam Deck/Linux Additional Instructions
🚩You do not need to do this if you are using Windows!
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Configuration
- See P3RFix.ini to adjust settings for the fix.
v1.1.4
What's Changed
- Fixed issue with intro skip to the opening movie where it would softlock the game. (#28)
Installation
- Extract the contents of the release zip in to the the game's binary folder.
(e.g. "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store or "steamapps\common\P3R" for Steam).
Steam Deck/Linux Additional Instructions
🚩You do not need to do this if you are using Windows!
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Configuration
- See P3RFix.ini to adjust settings for the fix.
v1.1.3
What's Changed
- Changed render texture resolution hook to scale every render texture, including the UI and screen captures. (#26)
- Fixed intro skip to opening movie not working. (#28 )
- Fixed issue where parts of the UI could get cut off at <1080p resolutions.
- Fixed screen fades not being spanned properly at <16:9.
- Fixed dark hour transition being squashed at >16:9.
Installation
- Extract the contents of the release zip in to the the game's binary folder.
(e.g. "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store or "steamapps\common\P3R" for Steam).
Steam Deck/Linux Additional Instructions
🚩You do not need to do this if you are using Windows!
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Configuration
- See P3RFix.ini to adjust settings for the fix.
v1.1.2
What's Changed
- Added option to stop the game pausing when alt+tabbed (see ini to enable).
- Added option to scale render texture resolution. This primarily affects menus and persona model previews for example. (#17)
Thanks to @Drahsid for contributing on this, and thank you to @emoose for releasing info about how to accomplish this. - Adjusted intro skip to automatically enable network features and to allow choosing which intro state to skip to. (#19) (#22)
- Added option to stop menus from being capped to 60fps. (#2)
- Added experimental option to change the framerate cap beyond 120FPS. (#2)
- Reworked method for automatically grabbing desktop resolution. This should avoid any DPI scaling related shenanigans. (#17)
Installation
- Extract the contents of the release zip in to the the game's binary folder.
(e.g. "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store or "steamapps\common\P3R" for Steam).
Steam Deck/Linux Additional Instructions
🚩You do not need to do this if you are using Windows!
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Configuration
- See P3RFix.ini to adjust settings for the fix.
New Contributors
v1.1.1
Changes
- Added screen percentage (a.k.a render scale) override.
- Added a configurable intro skip feature.
Screen Percentage
Disabled by default so check the ini if you want to enable it.
Intro Skip
Check the ini to configure it. By default, all logos will be skipped but you will still be prompted to enable/disable network features.
Here's an example of how fast the game can boot with the SkipToLoadSave
option.
segaofamericainc.l0cb6b3aea_s751p9cej88mt.2024.02.09.-.02.32.07.02.mp4
Installation
- Extract the contents of the release zip in to the the game's binary folder.
(e.g. "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store or "steamapps\common\P3R" for Steam).
Steam Deck/Linux Additional Instructions
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Configuration
- See P3RFix.ini to adjust settings for the fix.
v1.1.0
Changes
- Reworked HUD fix. Should address any cut off text or user interface. #8
- Added initial support for spanning screen fades to fill the screen. #10
This does not span all fades but does cover the 3 most common ones. - Added injection delay parameter to aid with potential compatibility issues.
Installation
- Extract the contents of the release zip in to the the game's binary folder.
(e.g. "XboxGames\Persona 3 Reload\Content" for Xbox/MS Store or steamapps\common\P3R" for Steam).
Steam Deck/Linux Additional Instructions
- Open up the game properties in Steam and add
WINEDLLOVERRIDES="dsound=n,b" %command%
to the launch options.
Configuration
- See P3RFix.ini to adjust settings for the fix.