Clover-boot-GPD-WIN-2

macOS Mojave build for GPD WIN 2 handheld x86 PC

This is a work in progress for supporting all macOS Mojave drivers on GDP WIN 2 hardware.

Getting Started

1. BIOS Setup

Power on devic, then press and hold Esc or Delete until the setup screen is loaded.

2. Enable Thunderbolt

Find the Thunderbolt configuration menu and make sure thunderbolt is not its default value fully disabled. Also, enable booting from thunderbolt storage. You can play around with all the settings in thunderbolt, not sure yet what effect the other thunderbolt options have.

3. Use an adapter to connect install USB boot image into the USB-C port.

(official Apple USB thunderbolt adapter is recommended for battery charging during the installation.)

Drivers Successfully Installed

- Bluetooth

- Internal Audio

- Intel Graphics

- Internal Fan Speed & Thermal Sensors

Unresolved Issues

- No WIFI yet, (intel AC 7265)

- Thunderbolt Alpine Ridge controller

- No battery status

- Internal MicroSD card reader not working

---

GPD WIN 2 Hardware

Intel® Core™ m3-7Y30 Processor

Codename Kaby Lake

Lithography 14 nm

Cores 2

Threads 4

Processor Base Frequency 1.00 GHz

Max Turbo Frequency 2.60 GHz

Cache 4 MB SmartCache

Bus Speed 4 GT/s OPI

TDP 4.5 W

Configurable TDP-up Frequency 1.60 GHz

Configurable TDP-up 7 W

Configurable TDP-down Frequency 600 MHz

Configurable TDP-down 3.75 W

---

Intel HD Graphics 615

Codename Kaby-Lake GT2

Architecture Intel Gen. 9 (Kaby Lake)

Pipelines 24 - unified

Core Speed 300 - 1050 (Boost) MHz

Memory Bus Width 64/128 Bit

Memory Type DDR3L/LPDDR3

Shared Memory yes

---

INTEL® DUAL BAND WIRELESS-AC 7265

Bands 2.4 GHz, 5 GHz

Wi-Fi 802.11ac

Bluetooth Version 4.2

System Interface Type Wi-Fi(PCIe), BT(USB)