dv-loco-analogue-control-mod

Derail Valley mod for analogue control in locomotives

REGENERATE THE CONFIG.JSON AFTER EVERY UPDATE TO PREVENT VERSION MIGRATION ISSUES

There is only one joystick configured in the game. Multiple attached controllers will fight each other. 99% Sure this wont work with VR.

This mod puts the value on your controller axis into the in game axis. You should use a controller which holds its current value such as a HOTAS throttle. Don't try and use something like an xbox controller.

For button mappings please use your joystick/controller utility or 3rd party software to map buttons to keys

Using the Mod

• Install Unity Mod Manager
• Copy the LocoAnalogueControlMod.dll and Info.json into the Derail Valley\Mods\LocoAnalogueControlMod folder
• Run Derail Valley to generate config.json in the mod folder
• Update config.json for each input.
  • AxisName is the in game joystick axis name which is assigned an axis number. See Understanding Joystick Mapping. Leave any unused inputs as a blank string
  • Scaling Allows you to apply a scaling to an axis in case it doesnt saturate the full range. Applying a negative scaling will invert the axis
  • FullRange takes a -1 to 1 range and maps it to 0 to 1
  • Debug enables printing the value being applied to the mod manager log. Enable this for first time setup.
  • DeadZoneCentral is the percentage of the axis where an input value will produce a 0 value expressed as a float. 0.1 = 10%
  • DeadZoneEnds is the percentage of the axis where an input value will produce a -1/1 value expressed as a float. 0.1 = 10%
• Disable and re-enable the mod from the mod manager log window open (ctrl + F10) to reload the config and hop into a locomotive
• With the mod manager log window open move your controller axis and observe the output in the log window
  • The reverser axis should be from -1 to 1. All other axis are from 0 to 1
• Correctly set the config.json then disable and re-enable the mod

Understanding Joystick Mapping

The in game axis names need to be provided to the config json to grab the correct axis number from your controller. All controllers use the same axis names so multiple controllers are not supported unless the devs change this behaviour.

A simple way to find the controller axis numbers is through Windows game controllers test utility. This can be opened with WinKey + R then typing joy.cpl. Select the apropriate device (there should only be one connected) and select Properties followed by Test. You can then get the game axis name from the table.

Input Axis Number	Game Axis Name	Windows Axis Name	Inverted in game
0	Oculus_GearVR_LThumbstickX	X Axis	False
1	Oculus_GearVR_LThumbstickY	Y Axis	True
2	Oculus_GearVR_RThumbstickX	Z Axis	False
3	Oculus_GearVR_RThumbstickY	X Rotation	True
4	Oculus_GearVR_DpadX	Y Rotation	False
5	Oculus_GearVR_DpadY	Z Rotation	True
11	Oculus_GearVR_LIndexTrigger		False
12	Oculus_GearVR_RIndexTrigger		False