Skip to content

SimplrSSH v1.4.10

Choose a tag to compare

@github-actions github-actions released this 06 Oct 03:54
0ccf943

SimplrSSH v1.4.10

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.10-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

  • Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
    add SimplrSSH-v1.4.10-release.bin at address 0x0, and click Program.
  • Command line:
    esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.10-release.bin
    

SHA-256: 557af88bc82aba5ab09b53080e263e27ab87c754ea80fc8d5c45339b9c93c258 (also in SimplrSSH-v1.4.10-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.10-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.10-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.10-release.bin above.

SHA-256: 1d9c0e97d50a4f711af9f2f1a1feffb50caf6fab53a01bcfba403d74d67597e9 (also in SimplrSSH-v1.4.10-launcher.bin.sha256)

M5Stack Tab5 (with the Tab5 Keyboard)

Download SimplrSSH-Tab5-v1.4.10-release.bin and flash it to the Tab5 at offset 0x0 (ESP32-P4, 16 MB). To
enter download mode, hold the Tab5's reset button for about 2 seconds, until the green LED
flashes quickly.

  • Browser: open https://espressif.github.io/esptool-js/, connect the Tab5 over USB-C,
    add SimplrSSH-Tab5-v1.4.10-release.bin at address 0x0, and click Program.
  • Command line:
    esptool.py --chip esp32p4 --baud 921600 write_flash 0x0 SimplrSSH-Tab5-v1.4.10-release.bin
    

SHA-256: 49aee2808809d03dfb0f8476bd2e0431f3901a7152ff54bfde3b85fa5c5d68e4 (also in SimplrSSH-Tab5-v1.4.10-release.bin.sha256)

With a launcher, install SimplrSSH-Tab5-v1.4.10-launcher.bin from the SD card instead.
SHA-256: c267ff0eebb8479564d5de43a0ec177e4b0ebd9da99b6c50c019247aaf379ff4 (also in SimplrSSH-Tab5-v1.4.10-launcher.bin.sha256)

Tab5 support is new and has not been tested on a Tab5 yet: please report what you find.

What's Changed

  • Tab5 full-screen SSH terminal (TUI), touch scrolling; key passphrases… by @bluenevus in #14

Full Changelog: v1.4.9...v1.4.10