… Stratified) correctly by checking it it's a storage tank only, and whether it's connected on the source side to a plant loop (related #96)

…s. Also added a custom = '90.1-2007 with addenda dn' which will let you use heated only (sys 9 and 10 in 90.1-2010, 10 and 11 in addenda dn) with 90.1-2007

…xed (OS doesn't have the WAterHeater:Sizing objects...)

…is_swh_loop

Conflicts:
	openstudio-standards/lib/openstudio-standards/standards/Standards.Model.rb
	openstudio-standards/lib/openstudio-standards/standards/Standards.ThermalZone.rb

…o baseline_fixes_2

Conflicts:
	openstudio-standards/lib/openstudio-standards/standards/Standards.CoilCoolingDXSingleSpeed.rb
	openstudio-standards/lib/openstudio-standards/standards/Standards.Model.rb
	openstudio-standards/lib/openstudio-standards/standards/Standards.PlantLoop.rb
	openstudio-standards/lib/openstudio-standards/standards/Standards.WaterHeaterMixed.rb

…o baseline_fixes_2

Conflicts:
	openstudio-standards/lib/openstudio-standards/standards/Standards.CoilCoolingDXSingleSpeed.rb
	openstudio-standards/lib/openstudio-standards/standards/Standards.Model.rb
	openstudio-standards/lib/openstudio-standards/standards/Standards.PlantLoop.rb
	openstudio-standards/lib/openstudio-standards/standards/Standards.WaterHeaterMixed.rb

…building Measure

…up HVAC to them later

…heet for all lookups

…ontrol is required or not

…o avoid messing with daylighting areas.

…ngs this way.

… make sense for SAT

…ory HVAC systems

…o per-area and DCV being enabled at the system level if DCV is req'd. Appears to follow the same logic and simulation settings that CBECC-Com is using.

…per action message if a terminal was actually changed.

… use a higher number than the minimum because enthalpy wheels are typically used in this role and they have higher effectivenesses than minimum required. This is per the Achieving the 30% goal PNNL report, page 5.39.

…bility for users

…) of log messages could eventually be handled globally with a different approach.

…lation

…ly updated for 90.1-2013

… DX coils and chillers.

…ere the zones have multipliers.

…stments.

…or pri/sec CHW systems and CW systems.

… reflect 90.1-2013

…meouts

…ing to the E+ IDD, these limits are applied even when the control type would not indicate that they would be used.

…ng systems.

… pumps