Repository navigation
Replies: 1 comment
|
Yes, I'd use Sionna RT for the geometry/ray-tracing part of a HAPS model, but at ~20 km altitude I wouldn't treat the raw RT result as the complete channel model. On top of the geometric paths I'd consider atmospheric gas loss, rain/cloud attenuation where relevant to the carrier frequency, elevation-angle-dependent LoS/shadowing, antenna pattern and pointing loss, Doppler from platform/user motion, terrain/clutter around the ground terminals, and Earth curvature for larger coverage areas. For a realistic model I'd probably combine Sionna RT for the local deterministic multipath near the receiver with an NTN/HAPS large-scale model (e.g. 3GPP/ITU-R parameters) for the long air-to-ground portion. That keeps the detailed local geometry while accounting for effects that a normal terrestrial scene does not capture by itself. |
Uh oh!
There was an error while loading. Please reload this page.
I am working on a HAPS communication system where the transmitter is placed at an altitude of around 20 km and the receivers are on the ground. I would like to know whether Sionna can be used for this particular purpose. If I plan to implement a realistic HAPS channel model, what additional parameters should I consider beyond the standard ray tracing outputs (e.g., atmospheric attenuation, elevation-angle effects, Doppler, shadowing, weather effects, Earth curvature, etc.)?
All reactions