Repository navigation
Open CASCADE Technology 8.0.2 Release #1792
dpasukhi
announced in
Announcements
Replies: 0 comments
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
Open Cascade is publishing Open CASCADE Technology version 8.0.2, the second regular maintenance release in the 8.0 series.
This release brings together selected fixes from the development branch after 8.0.1. It improves fillet and loft construction, numerical geometry, transformations, meshing, hidden-line removal, BREP reading, STEP data exchange and SDK integration. The C++17 baseline, public C++ interfaces and class layouts of 8.0.1 are preserved.
The previous maintenance release notes are available for 8.0.1. V8_0_1 release
Highlights
Modeling Algorithms
Fixed two missing-edge paths in fillet construction.
ChFi3d_Builderreports a failed start solution when an obstacle face has no matching edge, and the two-corner fillet check runs after the edge search is exhausted. These paths now stop before constructing an invalid curve adaptor. #1708, #1710Improved periodic fillet spine closure. Seam multiplicity is reduced when the closure is below G2 continuity and the knot can be removed. The existing elementary spine interfaces and evaluation paths are retained. #1501
Preserved the first section's split history in
BRepOffsetAPI_ThruSectionswhen a closed loft repeats that section at the end. Generated-face history remains available for the original edges. Unbounded section edges and missing endpoints are also checked before loft construction. #1783, #1784Fixed null auxiliary-spine access during pipe construction. An absent auxiliary spine is rejected before its closure flag is read, and regression coverage checks a subsequent valid sweep. #1785
Fixed iterator invalidation while removing malformed child edges from a wire. The iterator advances before removal, and the edge wrapper stays alive during the operation. #1787
Corrected circular wire offsets when the offset collapses a circular edge. Once the circular special case is recognized, its result is retained through the existing completion path. Regression tests cover collapsed circles, taper and positive offsets. #1453
Corrected Boolean result handling and tolerance limits. Union and intersection sets reach their existing outputs, section splitting is limited to common vertices and pave-block endpoints, and wire correction uses both edge lengths when limiting tolerance growth. #1620
Corrected mass-property integration for plane-limited volumes and offset reference planes. Fixed and adaptive integration now account for the supplied plane when calculating mass, centre of gravity and inertia. #1587, #1601
Fixed
GeomFill_CoonsAlgPatch::Value()to evaluate the U-direction boundary curves at the U parameter. #1550Corrected intersection preparation. The first and last polygon segments are treated as neighbours only for a closed polygon. Curve-surface intersection candidates are sorted while preserving their transition classification. #1653
Improved fitting accuracy and subdivision. Endpoint constraints are applied to the fitted result, and narrow approximation intervals remain available when hang checking is disabled. Least-squares equations are centred around a sampled point to reduce cancellation for curves far from the origin. #1653, #1640, maintenance integration fixes
Corrected C2 face-continuity classification in
BRepLib. Promotion to C2 checks transverse second derivatives. A rational cylinder seam with a second-derivative discontinuity retains G2 regularity, while a smooth split can retain C2. Regression coverage includes face order, orientations and locations. Maintenance integration fixesReduced retention of temporary solid classifiers in
BOPAlgo_BuilderSolid. Infinite-point queries on temporary shells use a local classifier, while repeated inside checks continue to use the context cache. #1046Modeling Data And Foundation Classes
Preserved periodic trim ranges in
Geom_TrimmedCurveandGeom2d_TrimmedCurvecopying, adaptor reconstruction and persistence. Text and binary persistence retain shifted and multi-period parameter ranges. Trimmed evaluations use the appropriate interior derivatives, and adaptor reloads clear stale evaluation state. #1644Corrected periodic tangent-continuity checks, surfaces trimmed in a single parameter direction, curve-on-surface derivatives and third derivatives of offset curves. Projection derivatives are also stabilized near nearly parallel surface tangents. #1644, #1741
Preserved natural periodic intervals when copying analytic bisectors. This restores wire-offset construction that depends on consistent bisector parameter comparisons. Maintenance integration fixes
Fixed flat-knot span selection in
BSplCLib::LocateParameter(). Parameters immediately below an interior knot remain in the span containing them, keeping scalar and grid B-spline evaluation consistent. #1512Corrected the pole-count limit in 2D and 3D Bezier curve insertion. Curves can reach
MaxDegree() + 1poles, consistent with their constructors. #1593Fixed an
AdvApp2Varworkspace index so U-direction Jacobi maxima are written to the slot used by the patch error estimate. Regression coverage checks the measured approximation error on a sphere. #1418Corrected point-pair access in parallel curve-surface and surface-surface extrema results. Distance-only results retain their distance information, and requests for unavailable point pairs follow the existing checked failure contract. #1596
Corrected located and general
BRepToolstransformations. Geometry, triangulations and normals are transformed in their representation coordinate systems, including repeated transformations and updates through the existing mutable general-transform accessor. #1472Fixed reading of long real values in BREP geometry and shape data. The ordinary short-value path uses a small buffer, while longer values use bounded fallback storage. Malformed and oversized values propagate stream and read failures. #1786
Corrected the default
gp_Hyprminor radius to use the non-negative undefined-radius value, matching the convention used bygp_Hypr2d. #1538Meshing, Curve Sampling And Hidden-Line Removal
Stabilized mesh circumcircle calculations by using local coordinates and corrected refinement-point insertion near constrained edges. #1741
Corrected tangential-deflection sampling for curve segments with shallow curvature so the requested linear deflection remains effective. #1741
Preserved the B-spline surface type used by exact HLR and based its sample count on the active U and V spans. Regression coverage includes full and partial surface ranges and edge-on projections. #1634, #1640
Improved curve-on-surface deviation checking at seams and degenerate edges. The larger deviation from the seam's pcurves is retained, both adaptors are cleared before reuse, and same-parameter deviation is reset for degenerated edges. Surface-knot crossings used in projection are sorted before duplicate removal. #1634, #1741, #1640
Data Exchange
Corrected STEP field handling for logical SELECT values, arrays and copied field lists. Readers, writers and sharing operations respect declared array bounds, reserved writer positions are retained, and unset strings keep their state. #1470
Hardened STEP input validation. Nested oriented edges are resolved with cyclic-chain detection, and B-spline poles, knots, multiplicities and weights are checked before conversion. Unresolved reference record numbers and invalid AP242 normal dimensions are also handled. #1514, #1647
Corrected AP242 triangle-strip and triangle-fan decoding to use the expected vertex order. #1611
Corrected STEP measurement-unit handling. Constructive geometry uses the units of its owning representation, PMI dimension values are written in their declared STEP units, and generic dimensional-tolerance bounds are converted to XCAF units when read. #1644, #1647
Preserved STEP GD&T references during writing and entity sharing. Fixes cover runout orientation and angle references, qualified measure references and datum-modifier measures. #1644, #1647
Fixed XCAF datum-point reading to use the point's own array independently of the annotation-plane array. #1483
Configuration, Documentation And Draw
Corrected CMake package paths for relocated SDK installations and preserved component-based and build-tree
find_package(OpenCASCADE)discovery. #1644Added configure-time linking notices for static libraries and platform-restricted build configurations. #1724
Corrected the generated Windows environment so enabling FreeType adds
HAVE_FREETYPEtoPRODUCTS_DEFINES. FreeImage keeps its separate definition. #1428Updated the Unicode attribution in
NCollection_UtfIteratorto Unicode License V3. #1532Corrected the Y-coordinate calculation in the Draw
scaleand2dscalecommands. #1493Expanded GTest coverage and refreshed Draw references for the migrated geometry, mesh and HLR changes, including platform-specific HLR results on Linux and Windows. Maintenance integration fixes
Contributors
Thanks to everyone who reported, investigated, tested, reviewed and fixed issues for this maintenance release.
Full Changelog: V8_0_1...V8_0_2
This discussion was created from the release V8_0_2.
All reactions