You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
MHK_RM1_Fixed: cpmax, λopt and ServoDyn file inquiry
#3532
MHK_RM1_Fixed in OpenFAST/r-test is a regression test case specifically meant to test OpenFAST's MHK cavitation and buoyancy features with a fixed rotor speed, not a full closed-loop controller simulation:
Because the drivetrain generator DOF is turned off and the rotor speed is held constant, no ServoDyn file is needed. If you want to add torque/pitch control, you can set CompServo = 1, supply a ServoFile, and enable GenDOF = True in ElastoDyn.
2. cpmax and λopt for MHK_RM1_Fixed
OpenFAST input files don't store cpmax or λopt directly — those are outputs of the rotor aerodynamics. In the r-test case itself:
TipRad = 10 m, RotSpeed = 11.5 rpm ($\omega \approx 1.2043\text{ rad/s}$), and HWindSpeed = 1.9 m/s (giving a test operating TSR of $\lambda \approx 6.34$).
Neary et al., "Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies", Sandia Report SAND2014-9040, 2014.
To get the exact cpmax and λopt for this specific OpenFAST/AeroDyn discretization (blade geometry, polar files, and cavitation/wake settings), the cleanest way is to run a TSR sweep (varying RotSpeed or inflow speed at zero pitch) using the standalone AeroDyn driver in modules/aerodyn/ad_MHK_RM1_Fixed/ad_driver.dvr and read the peak of RtAeroCp vs. RtTSR.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
Uh oh!
There was an error while loading. Please reload this page.
Could you tell me what the values of cpmax and λopt are for this MHK_RM1_Fixed turbine, and why there is no ServoDyn file?
All reactions