Skip to content

ESP32: Compiling

Jump to bottom
Paciente8159 edited this page Aug 10, 2022 · 1 revision

µCNC for ESP32 can be built this way

Method one - PlatformIO (preferred)

  1. Get Visual Studio Code and install it.
  2. Install the PlatformIO extension.
  3. Open uCNC folder in VSCode.
  4. Edit cnc_config.h file and cnc_hal_config.h file to fit your needs and board.
  5. If needed edit the platformio.ini file environment for your board. Compile the sketch and upload it to your board.

Method two - Arduino IDE (easiest)

  1. Get Arduino IDE and install it.
  2. If you don't have install ESP32 for Arduino with Arduino board manager has explained here
  3. Go to uCNC folder and open uCNC.ino sketch.
  4. Edit cnc_config.h file and cnc_hal_config.h file to fit your needs and board.
  5. Compile the sketch and upload it to your board (via maple bootloader or other method).

µCNC is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. µCNC is distributed WITHOUT ANY WARRANTY.

Also without the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

µCNC Wiki

µCNC for ALL MCU

µCNC for AVR

µCNC for STM32F1 and STM32F4

µCNC for SAMD21

µCNC for ESP8266

µCNC for ESP32

µCNC for NXP LPC176x

µCNC for NXP RP2040

Clone this wiki locally