Flame Sensor

Project Overview

The Flame Sensor project enables the detection of flames using an Arduino Nano and a flame sensor module. This project is designed for applications where the presence of flames needs to be monitored, such as fire detection systems or safety devices.

Components Needed

1. Arduino Nano
2. Flame Sensor Module
3. Jumper Wires

Block Diagram

Circuit Setup

1. Connect Flame Sensor to Arduino Nano:
   • Connect the digital output pin of the flame sensor module to digital pin 2 on the Arduino Nano.
   • Connect the VCC pin of the flame sensor module to the 5V pin on the Arduino Nano.
   • Connect the GND pin of the flame sensor module to the GND pin on the Arduino Nano.

Instructions

1. Circuit Setup:

   • Wire the flame sensor module to the Arduino Nano according to the circuit setup.

2. Code Upload:

   • Connect the Arduino Nano to your computer using a USB cable.
   • Open the Arduino IDE and paste the provided code.
   • Select the appropriate board (Arduino Nano) and port from the Tools menu.
   • Upload the code to the Arduino Nano.

3. Testing:

   • After uploading the code, open the serial monitor.
   • Observe the messages indicating the presence or absence of flames.

Applications

• Fire Detection: Used in fire alarm systems and devices to detect the presence of flames.
• Safety Systems: Integrated into safety equipment to trigger alarms or shutdown procedures in case of fire hazards.

Notes

• Ensure proper wiring and connection between the flame sensor module and the Arduino Nano.
• Adjust sensitivity settings or thresholds as needed for specific applications.
• Test the system in controlled environments to validate its performance and reliability.

---

🌐 projectslearner.com
📧 projectslearner@gmail.com
📸 Instagram
📘 Facebook
▶️ YouTube
📘 LinkedIn

Crafted for you with ❤️ from ProjectsLearner