This is an auto-generated README file.# ESP32 Flex Sensor Project
This project demonstrates how to use an ESP32 microcontroller to read values from a flex sensor. Flex sensors are commonly used to measure bending or flexing in various applications such as wearable devices, robotics, and interactive art projects.
- ESP32 Microcontroller
- Flex Sensor
- Jumper Wires
- Breadboard
- Connecting the Flex Sensor to ESP32:
- Connect one end of the flex sensor to a 3.3V pin on the ESP32.
- Connect the other end of the flex sensor to the analog input pin 34 on the ESP32.
- Place a pull-down resistor (e.g., 10kΩ) between the analog input pin and GND to ensure stable readings.
-
Setup:
- Initialize serial communication at a baud rate of 115200 using
Serial.begin()
.
- Initialize serial communication at a baud rate of 115200 using
-
Operation:
- In the
loop()
function:- Read the analog value from the flex sensor using
analogRead(flexSensorPin)
. - Print the flex sensor value to the Serial Monitor.
- Add a delay of 500 milliseconds to avoid spamming the Serial Monitor.
- Read the analog value from the flex sensor using
- In the
-
Considerations:
- Sensor Calibration: Calibrate the sensor according to the specific range of motion you intend to measure.
- Power Supply: Ensure the sensor has a stable power supply for accurate readings.
- Environmental Factors: Be aware of environmental factors that might affect the sensor’s performance, such as temperature and humidity.
- Wearable Devices: Measure bending or flexing in wearable technology.
- Robotics: Monitor joint movements or deformations in robotic components.
- Interactive Art Projects: Create art installations that respond to bending or flexing movements.
- Sensor Output: The flex sensor provides an analog output that varies with the amount of bending or flexing.
- Data Interpretation: The raw analog values can be further processed or mapped to meaningful units if necessary.
🌐 ProjectsLearner - ESP32 Flex Sensor
📧 Email
📸 Instagram
📘 Facebook
📘 LinkedIn
Created with ❤️ by ProjectsLearner