Repository navigation
Home
Welcome to the deauthattack wiki!
1.Nodemcu board(esp8266)
2.USB Micro for nodemcu board
For Nodemcu Board I always recommend the v1.0 (might be sold under a different version number).
It's the board from Amica. It is cheap, breadboard friendly and uses the cp2102,a better alternative to the old CH340 USB to serial chip.
You can install software into esp8266 in two ways
1.using flash tool to upload(flash) .bin file into esp8266 board
2.using arduinoIDE to compile and upload it into esp8266 board
Using flash tool
NodeMCU flasher is a firmware programmer for NodeMCU DEVKIT V0.9.You can use it to program NodeMCU DEVKIT or your own ESP8266 board. you MUST set GPIO0 to LOW before programming, and NodeMCU DEVKIT V0.9 will do it automatically make sure that your esp8266 dev board (nodemcu) is connected to you pc
download the necessary flash tools files from here
select folder Win32/Win64 according to your computer OS bit
open release folder and run espflasher.exe file.
select the COM port you Nodemcu is connected to.
go to config and select your .bin file at 0x000000. and flash it
Using ArduinoIDE
First you have to install and open the Arduino IDE.
In Arduino go to File -> Preferences add both URLs in Additional Boards Manager URLs https://raw.githubusercontent.com/SpacehuhnTech/arduino/main/package_spacehuhn_index.json
Go to Tools -> Board -> Boards Manager, search "deauther" and install Deauther ESP8266 Boards
Select your board at Tools -> Board (NodeMCU) and be sure it is at Deauther ESP8266 Boards (and not at ESP8266 Modules)!
Download the source code for this project from the releases page. You can also clone the project to get the latest changes, but you will also get the latest bugs ;)
Extract the whole .zip file, navigate to esp8266_deauther and open esp8266_deauther.ino with Arduino.
Check your upload settings and press upload!
You might want to adjust the display, LED and button configurations. You can do that in the A_config.h file (second tab in Arduino). You can also find predefined configfor certain boards there: A_config.h.