This is a macropad created in Fusion 360/kiCAD which has 4 buttons. The idea is to attack it to your monitor using double sided tape to get a macro bar below yor monitor. It has some basic macros, Undo, Copy, Paste and clear console
3D modeling in Fusion 360, the PCB was imported as a 3d model from KiCAD. The microcontroller is on the other side of the pcb so it is not visible
The PCB was designed in KiCAD
I used KMK to create the Firmware
- 1x XIAO RP2040
- 4x Cherry MX switches
- 4x Heatset inserts (M3x5x4)
- 4x screws (M3x16)
- 3d printing Filament (Any works)
- Double sided tape