Wiki page pkgdev:setup bootstrap links #227
Comments
jperkin
pushed a commit
that referenced
this issue
Oct 6, 2019
Switched to github for upstream, build system now uses cmake.
Changes in major release 2.0.0:
New Features
implement polyphonic key pressure (#185, thanks to @mawe42)
add API for manipulating default modulators (#265, #164, #71, thanks to @mawe42)
add midi.autoconnect setting for automatically connecting fluidsynth with available MIDI Input ports (currently only for alsa_seq thanks to @tomcucinotta)
add seek support to midi-player (#261, thanks to @loki666)
add support for text and lyrics midi events (#111)
add support for 24 bit sample soundfonts (#301, #329)
consider "important midi channels" during overflow calculation synth.overflow.important-channels (#294, thanks to @mawe42)
add a custom default modulator for MIDI CC8 to support proper stereo balance (#317, thanks to @mawe42)
add support for an additional custom high-pass filter (#331, thanks to @mawe42)
incorporate JJC's polymono patch (#306, #236, #158)
add basic channel support
implement MIDI modes Omni On, Omni Off, Poly, Mono
implement portamento control
implement legato control
implement breath control
add support soundfont loading from memory (#241)
add a profiling command interface (#345, thanks to @jjceresa)
add support on demand sample loading (#366, thanks to @mawe42)
add reverb and chorus settings (#49)
allow using the midi router to manipulate midi files when playing from command line
fluid_synth_process() received a new proper implementation
synth.effects-groups allows to render effects of all MIDI channels to separate audio channels
General
CMake 3.1.0 or later is required for building
consider channel pressure, key pressure and pitch wheel for lower attenuation boundary calculation (#163, thanks to @mawe42)
complete rewrite of the LADSPA subsystem (#227, #235, thanks to @mawe42)
complete rewrite of the Soundfont Loader API (#334, #309)
avoid reverb amplitude growing exponentially (#279, thanks to @jjceresa)
removed deprecated autotools build system
a minimal build of fluidsynth without requiring pkg-config is supported
remove deprecated LADCCA support
use unique device names for the audio.portaudio.device setting (#284, thanks to @jjceresa)
documentation of the settings moved to http://www.fluidsynth.org/api/fluidsettings.xml
adjust MIDI Pan and Balance calculations as outlined by MIDI Recommended Practice (RP-036) (#317, thanks to @mawe42)
make network support compile-time optional (#307, thanks to @carlo-bramini)
speed up calculation of chorus modulation waveforms for devices without FPU (#321, thanks to @carlo-bramini)
cleanup internal audio rendering and mixing engine (#197)
reduce memory consumption of loaded soundfonts (#370, thanks to @mawe42)
jperkin
pushed a commit
that referenced
this issue
Oct 20, 2019
Switched to github for upstream, build system now uses cmake.
Changes in major release 2.0.0:
New Features
implement polyphonic key pressure (#185, thanks to @mawe42)
add API for manipulating default modulators (#265, #164, #71, thanks to @mawe42)
add midi.autoconnect setting for automatically connecting fluidsynth with available MIDI Input ports (currently only for alsa_seq thanks to @tomcucinotta)
add seek support to midi-player (#261, thanks to @loki666)
add support for text and lyrics midi events (#111)
add support for 24 bit sample soundfonts (#301, #329)
consider "important midi channels" during overflow calculation synth.overflow.important-channels (#294, thanks to @mawe42)
add a custom default modulator for MIDI CC8 to support proper stereo balance (#317, thanks to @mawe42)
add support for an additional custom high-pass filter (#331, thanks to @mawe42)
incorporate JJC's polymono patch (#306, #236, #158)
add basic channel support
implement MIDI modes Omni On, Omni Off, Poly, Mono
implement portamento control
implement legato control
implement breath control
add support soundfont loading from memory (#241)
add a profiling command interface (#345, thanks to @jjceresa)
add support on demand sample loading (#366, thanks to @mawe42)
add reverb and chorus settings (#49)
allow using the midi router to manipulate midi files when playing from command line
fluid_synth_process() received a new proper implementation
synth.effects-groups allows to render effects of all MIDI channels to separate audio channels
General
CMake 3.1.0 or later is required for building
consider channel pressure, key pressure and pitch wheel for lower attenuation boundary calculation (#163, thanks to @mawe42)
complete rewrite of the LADSPA subsystem (#227, #235, thanks to @mawe42)
complete rewrite of the Soundfont Loader API (#334, #309)
avoid reverb amplitude growing exponentially (#279, thanks to @jjceresa)
removed deprecated autotools build system
a minimal build of fluidsynth without requiring pkg-config is supported
remove deprecated LADCCA support
use unique device names for the audio.portaudio.device setting (#284, thanks to @jjceresa)
documentation of the settings moved to http://www.fluidsynth.org/api/fluidsettings.xml
adjust MIDI Pan and Balance calculations as outlined by MIDI Recommended Practice (RP-036) (#317, thanks to @mawe42)
make network support compile-time optional (#307, thanks to @carlo-bramini)
speed up calculation of chorus modulation waveforms for devices without FPU (#321, thanks to @carlo-bramini)
cleanup internal audio rendering and mixing engine (#197)
reduce memory consumption of loaded soundfonts (#370, thanks to @mawe42)
jperkin
pushed a commit
that referenced
this issue
Nov 24, 2019
Sat Oct 20, 2019: Released Check 0.13.0 based on hash 2b18886a9a9d3bab44917a550d12128ad7e2c197 * configure: optional build documentation Issue #206 (GitHub) * missing <unistd.h> in some files Issue #196 and Issue #186 (GitHub) * Varous documentation improvements * END_TEST is now optional, as how START_TEST works has been redone Issue #158 * Various CMake related changes: - Support exporting Check to other projects with CMake 3 Issue #185 - Shared library support for Visual Studio Issue #220 - Fix wrong library filename Issue #226 - Add support for CMake package registry Issue #227 - CMake build type can now be debug or release Issue #228 - Add checkmk to CMake build.
jperkin
pushed a commit
that referenced
this issue
Jan 3, 2020
1.2.4.0 * Add TH Lift instances for Data.Text.Text and Data.Text.Lazy.Text (gh-232) * Update Haddock documentation to better reflect fusion eligibility; improve fusion rules for takeWhileEnd and length (gh-241, ghc-202) * Optimise Data.Text.replicate from O(n) to O(log n) (gh-209) * Support base-4.13.0.0 1.2.3.1 * Make decodeUtf8With fail explicitly for unsupported non-BMP replacement characters instead silent undefined behaviour (gh-213) * Fix termination condition for file reads via Data.Text.IO operations (gh-223) * A serious correctness issue affecting uses of take and drop with negative counts has been fixed (gh-227) * A bug in the case-mapping functions resulting in unreasonably large allocations with large arguments has been fixed (gh-221) 1.2.3.0 * Spec compliance: toCaseFold now follows the Unicode 9.0 spec (updated from 8.0). * Bug fix: the lazy takeWhileEnd function violated the lazy text invariant (gh-184). * Bug fix: Fixed usage of size hints causing incorrect behavior (gh-197). * New function: unsnoc (gh-173). * Reduce memory overhead in encodeUTF8 (gh-194). * Improve UTF-8 decoder error-recovery (gh-182). * Minor documentation improvements (@SInCE annotations, more examples, clarifications). 1.2.2.2 * The toTitle function now correctly handles letters that immediately follow punctuation. Before, "there's" would turn into "There'S". Now, it becomes "There's". * The implementation of unstreaming is faster, resulting in operations such as map and intersperse speeding up by up to 30%, with smaller code generated. * The optimised length comparison function is now more likely to be used after some rewrite rule tweaking. * Bug fix: an off-by-one bug in takeEnd is fixed. * Bug fix: a logic error in takeWord16 is fixed. 1.2.2.1 * The switch to integer-pure in 1.2.2.0 was apparently mistaken. The build flag has been renamed accordingly. Your army of diligent maintainers apologizes for the churn. * Spec compliance: toCaseFold now follows the Unicode 8.0 spec (updated from 7.0) * An STG lint error has been fixed
jperkin
pushed a commit
that referenced
this issue
Jan 3, 2020
Version 3.1.1.1 * Fix for GHCJS. #431 Version 3.1.1.0 * A new API: gracefulClose. #417 * touchSocket, unsafeFdSocket: Allow direct access to a socket's file descriptor while providing tools to prevent it from being garbage collected. This also deprecated fdSocket in favor of unsafeFdSocket and withFdSocket. #423 * socketToFd: Duplicates a socket as a file desriptor and closes the source socket. #424 Version 3.1.0.1 * getAddrInfo: raise exception if no AddrInfo returned. #410 * Avoid catching SomeException. #411 Version 3.1.0.0 * Making GC of socket safer. #399 * Deprecating fdSocket. Use withFdSocket instead to ensure that sockets are GCed in proper time. #399 Version 3.0.1.1 * Fix blocking if_nametoindex errors on Windows #391 Version 3.0.1.0 * Added getSocketType :: Socket -> IO SocketType. #372 * Correcting manual and brushing up test cases #375 * Fixed longstanded bug in getContents on mac #375 * Fixing regression: set correct sockaddr length for abstract addresses for Linux. #374 Version 3.0.0.1 * Fixed a bug in connect where exceptions were not thrown #368 Version 3.0.0.0 * Breaking change: the Network and Network.BSD are removed. Network.BSD is provided a new package: network-bsd. * Breaking change: the signatures are changed: old fdSocket :: Socket -> CInt new fdSocket :: Socket -> IO CInt old mkSocket :: CInt -> Family -> SocketType -> ProtocolNumber -> SocketStatus -> IO Socket new mkSocket :: CInt -> IO Socket * Breaking change: the deprecated APIs are removed: send, sendTo, recv, recvFrom, recvLen, htonl, ntohl, inet_addr, int_ntoa, bindSocket, sClose, SocketStatus, isConnected, isBound, isListening, isReadable, isWritable, sIsConnected, sIsBound, sIsListening, sIsReadable, sIsWritable, aNY_PORT, iNADDR_ANY, iN6ADDR_ANY, sOMAXCONN, sOL_SOCKET, sCM_RIGHTS, packSocketType, getPeerCred. * Breaking change: SockAddrCan is removed from SockAddr. * Socket addresses are extendable with Network.Socket.Address. * "socket" is now asynchronous-exception-safe. #336 * "recvFrom" returns (0, addr) instead of throwing an error on EOF. #360 * All APIs are available on any platforms. * Build system is simplified. * Bug fixes. Version 2.8.0.1 * Eensuring that accept returns a correct sockaddr for unix domain. #400 * Avoid out of bounds writes in pokeSockAddr. #400 Version 2.8.0.0 * Breaking change: PortNumber originally contained Word16 in network byte order and used "deriving Ord". This results in strange behavior on the Ord instance. Now PortNumber holds Word16 in host byte order. #347 * Breaking change: stopping the export of the PortNum constructor in PortNumber. * Use bytestring == 0.10.* only. * Use base >= 4.7 && < 5. Version 2.7.0.2 * Removing withMVar to avoid the deadlock between "accept" and "close" #330 * "close" does not throw exceptions. A new API: "close'" throws exceptions when necessary. #337 * Fixing the hang of lazy sendAll. #340 * Installing NetDef.h (#334) #334 Version 2.7.0.1 * A new API: socketPortSafe. #319 * Fixing a drain bug of sendAll. #320 * Porting the new CALLCONV convention from master. #313 * Withdrawing the deprecations of packFamily and unpackFamily. #324 Version 2.7.0.0 * Obsoleting the Network module. * Obsoleting the Network.BSD module. * Obsoleting APIs: MkSocket, htonl, ntohl, getPeerCred, getPeerEid, send, sendTo, recv, recvFrom, recvLen, inet_addr, inet_ntoa, isConnected, isBound, isListening, isReadable, isWritable, aNY_PORT, iNADDR_ANY, iN6ADDR_ANY, sOMAXCONN, sOL_SOCKET, sCM_RIGHTS, packFamily, unpackFamily, packSocketType * Breaking change: do not closeFd within sendFd. #271 * Exporting ifNameToIndex and ifIndexToName from Network.Socket. * New APIs: setCloseOnExecIfNeeded, getCloseOnExec and getNonBlock * New APIs: isUnixDomainSocketAvailable and getPeerCredential * socketPair, sendFd and recvFd are exported even on Windows. Version 2.6.3.5 * Reverting "Do not closeFd within sendFd" #271 Version 2.6.3.4 * Don't touch IPv6Only when running on OpenBSD #227 * Do not closeFd within sendFd #271 * Updating examples and docs. Version 2.6.3.3 * Adds a function to show the defaultHints without reading their undefined fields #291 * Improve exception error messages for getAddrInfo and getNameInfo #289 Version 2.6.3.2 * Zero memory of sockaddr_un if abstract socket #220 * Improving error messages #232 * Allow non-blocking file descriptors via setNonBlockIfNeeded #242 * Update config.{guess,sub} to latest version #244 * Rename my_inet_ntoa to avoid symbol conflicts #228 * Test infrastructure improvements #219 #217 #218 * House keeping and cleanup #238 #237 Version 2.6.3.1 * Reverse breaking exception change in Network.Socket.ByteString.recv #215 Version 2.6.3.0 * New maintainers: Evan Borden (@eborden) and Kazu Yamamoto (@kazu-yamamoto). The maintainer for a long period, Johan Tibell (@tibbe) stepped down. Thank you, Johan, for your hard work for a long time. * New APIs: ntohl, htonl,hostAddressToTuple{,6} and tupleToHostAddress{,6}. #210 * Added a Read instance for PortNumber. #145 * We only set the IPV6_V6ONLY flag to 0 for stream and datagram socket types, as opposed to all of them. This makes it possible to use ICMPv6. #180 #181 * Work around GHC bug #12020. Socket errors no longer cause segfaults or hangs on Windows. #192 * Various documentation improvements and the deprecated pragmas. #186 #201 #205 #206 #211 * Various internal improvements. #193 #200 Version 2.6.2.1 * Regenerate configure and HsNetworkConfig.h.in. * Better detection of CAN sockets. Version 2.6.2.0 * Add support for TCP_USER_TIMEOUT. * Don't conditionally export the SockAddr constructors. * Add isSupportSockAddr to allow checking for supported address types at runtime.
jperkin
pushed a commit
that referenced
this issue
Mar 17, 2020
Changes: - take list of files as input and show - option -e replaces NNN_USE_EDITOR - option -t replaces NNN_IDLE_TIMEOUT - PCRE support - more readline bindings for native prompts - run GUI app as plugin - attempt lazy unmount when regular unmount fails - fix unmount on macOS: use umount - detect sshfs and rclone to prompt intelligently - auto-proceed on file open (toggle key +) - quit with error code on Q - additional key F5 to toggle hidden - key e to edit in EDITOR (back on multiple user requests) - option to edit list of files in selection is changed to E - do not end selection on redraw - nuke: glow as Markdown viewer - nuke: refactor, handle some common video types by extension - file name removed from status bar - static Makefile target - generate, upload static package on release - fix crash on entering empty dir, then Down - fix keypresses lost when showing message - fix #227: nnn creates xdg-open zombies
jperkin
pushed a commit
that referenced
this issue
Sep 21, 2020
2.0.3 (2020-08-22) ~~~~~~~~~~~~~~~~~~ - Fix issues when building re2c as a CMake subproject (`#302 <https://github.com/skvadrik/re2c/pull/302>`_: - Final corrections in the SIMPA article "RE2C: A lexer generator based on lookahead-TDFA", https://doi.org/10.1016/j.simpa.2020.100027 2.0.2 (2020-08-08) ~~~~~~~~~~~~~~~~~~ - Enable re2go building by default. - Package CMake files into release tarball. 2.0.1 (2020-07-29) ~~~~~~~~~~~~~~~~~~ - Updated version for CMake build system (forgotten in release 2.0). - Added a short article about re2c for the Software Impacts journal. 2.0 (2020-07-20) ~~~~~~~~~~~~~~~~ - Added new code generation backend for Go and a new ``re2go`` program (`#272 <https://github.com/skvadrik/re2c/issues/272>`_: Go support). Added option ``--lang <c | go>``. - Added CMake build system as an alternative to Autotools (`#275 <https://github.com/skvadrik/re2c/pull/275>`_: Add a CMake build system (thanks to ligfx), `#244 <https://github.com/skvadrik/re2c/issues/244>`_: Switching to CMake). - Changes in generic API: + Removed primitives ``YYSTAGPD`` and ``YYMTAGPD``. + Added primitives ``YYSHIFT``, ``YYSHIFTSTAG``, ``YYSHIFTMTAG`` that allow to express fixed tags in terms of generic API. + Added configurations ``re2c:api:style`` and ``re2c:api:sigil``. + Added named placeholders in interpolated configuration strings. - Changes in reuse mode (``-r, --reuse`` option): + Do not reset API-related configurations in each `use:re2c` block (`#291 <https://github.com/skvadrik/re2c/issues/291>`_: Defines in rules block are not propagated to use blocks). + Use block-local options instead of last block options. + Do not accumulate options from rules/reuse blocks in whole-program options. + Generate non-overlapping YYFILL labels for reuse blocks. + Generate start label for each reuse block in storable state mode. - Changes in start-conditions mode (``-c, --start-conditions`` option): + Allow to use normal (non-conditional) blocks in `-c` mode (`#263 <https://github.com/skvadrik/re2c/issues/263>`_: allow mixing conditional and non-conditional blocks with -c, `#296 <https://github.com/skvadrik/re2c/issues/296>`_: Conditions required for all lexers when using '-c' option). + Generate condition switch in every re2c block (`#295 <https://github.com/skvadrik/re2c/issues/295>`_: Condition switch generated for only one lexer per file). - Changes in the generated labels: + Use ``yyeof`` label prefix instead of ``yyeofrule``. + Use ``yyfill`` label prefix instead of ``yyFillLabel``. + Decouple start label and initial label (affects label numbering). - Removed undocumented configuration ``re2c:flags:o``, ``re2c:flags:output``. - Changes in ``re2c:flags:t``, ``re2c:flags:type-header`` configuration: filename is now relative to the output file directory. - Added option ``--case-ranges`` and configuration ``re2c:flags:case-ranges``. - Extended fixed tags optimization for the case of fixed-counter repetition. - Fixed bugs related to EOF rule: + `#276 <https://github.com/skvadrik/re2c/issues/276>`_: Example 01_fill.re in docs is broken + `#280 <https://github.com/skvadrik/re2c/issues/280>`_: EOF rules with multiple blocks + `#284 <https://github.com/skvadrik/re2c/issues/284>`_: mismatched YYBACKUP and YYRESTORE (Add missing fallback states with EOF rule) - Fixed miscellaneous bugs: + `#286 <https://github.com/skvadrik/re2c/issues/286>`_: Incorrect submatch values with fixed-length trailing context. + `#297 <https://github.com/skvadrik/re2c/issues/297>`_: configure error on ubuntu 18.04 / cmake 3.10 - Changed bootstrap process (require explicit configuration flags and a path to re2c executable to regenerate the lexers). - Added internal options ``--posix-prectable <naive | complex>``. - Added debug option ``--dump-dfa-tree``. - Major revision of the paper "Efficient POSIX submatch extraction on NFA". ---- 1.3x ---- 1.3 (2019-12-14) ~~~~~~~~~~~~~~~~ - Added option: ``--stadfa``. - Added warning: ``-Wsentinel-in-midrule``. - Added generic API primitives: + ``YYSTAGPD`` + ``YYMTAGPD`` - Added configurations: + ``re2c:sentinel = 0;`` + ``re2c:define:YYSTAGPD = "YYSTAGPD";`` + ``re2c:define:YYMTAGPD = "YYMTAGPD";`` - Worked on reproducible builds (`#258 <https://github.com/skvadrik/re2c/pull/258>`_: Make the build reproducible). ---- 1.2x ---- 1.2.1 (2019-08-11) ~~~~~~~~~~~~~~~~~~ - Fixed bug `#253 <https://github.com/skvadrik/re2c/issues/253>`_: re2c should install unicode_categories.re somewhere. - Fixed bug `#254 <https://github.com/skvadrik/re2c/issues/254>`_: Turn off re2c:eof = 0. 1.2 (2019-08-02) ~~~~~~~~~~~~~~~~ - Added EOF rule ``$`` and configuration ``re2c:eof``. - Added ``/*!include:re2c ... */`` directive and ``-I`` option. - Added ``/*!header:re2c:on*/`` and ``/*!header:re2c:off*/`` directives. - Added ``--input-encoding <ascii | utf8>`` option. + `#237 <https://github.com/skvadrik/re2c/issues/237>`_: Handle non-ASCII encoded characters in regular expressions + `#250 <https://github.com/skvadrik/re2c/issues/250>`_ UTF8 enoding - Added include file with a list of definitions for Unicode character classes. + `#235 <https://github.com/skvadrik/re2c/issues/235>`_: Unicode character classes - Added ``--location-format <gnu | msvc>`` option. + `#195 <https://github.com/skvadrik/re2c/issues/195>`_: Please consider using Gnu format for error messages - Added ``--verbose`` option that prints "success" message if re2c exits without errors. - Added configurations for options: + ``-o --output`` (specify output file) + ``-t --type-header`` (specify header file) - Removed configurations for internal/debug options. - Extended ``-r`` option: allow to mix multiple ``/*!rules:re2c*/``, ``/*!use:re2c*/`` and ``/*!re2c*/`` blocks. + `#55 <https://github.com/skvadrik/re2c/issues/55>`_: allow standard re2c blocks in reuse mode - Fixed ``-F --flex-support`` option: parsing and operator precedence. + `#229 <https://github.com/skvadrik/re2c/issues/229>`_: re2c option -F (flex syntax) broken + `#242 <https://github.com/skvadrik/re2c/issues/242>`_: Operator precedence with --flex-syntax is broken - Changed difference operator ``/`` to apply before encoding expansion of operands. + `#236 <https://github.com/skvadrik/re2c/issues/236>`_: Support range difference with variable-length encodings - Changed output generation of output file to be atomic. + `#245 <https://github.com/skvadrik/re2c/issues/245>`_: re2c output is not atomic - Authored research paper "Efficient POSIX Submatch Extraction on NFA" together with Dr Angelo Borsotti. - Added experimental libre2c library (``--enable-libs`` configure option) with the following algorithms: + TDFA with leftmost-greedy disambiguation + TDFA with POSIX disambiguation (Okui-Suzuki algorithm) + TNFA with leftmost-greedy disambiguation + TNFA with POSIX disambiguation (Okui-Suzuki algorithm) + TNFA with lazy POSIX disambiguation (Okui-Suzuki algorithm) + TNFA with POSIX disambiguation (Kuklewicz algorithm) + TNFA with POSIX disambiguation (Cox algorithm) - Added debug subsystem (``--enable-debug`` configure option) and new debug options: + ``-dump-cfg`` (dump control flow graph of tag variables) + ``-dump-interf`` (dump interference table of tag variables) + ``-dump-closure-stats`` (dump epsilon-closure statistics) - Added internal options: + ``--posix-closure <gor1 | gtop>`` (switch between shortest-path algorithms used for the construction of POSIX closure) - Fixed a number of crashes found by American Fuzzy Lop fuzzer: + `#226 <https://github.com/skvadrik/re2c/issues/226>`_, `#227 <https://github.com/skvadrik/re2c/issues/227>`_, `#228 <https://github.com/skvadrik/re2c/issues/228>`_, `#231 <https://github.com/skvadrik/re2c/issues/231>`_, `#232 <https://github.com/skvadrik/re2c/issues/232>`_, `#233 <https://github.com/skvadrik/re2c/issues/233>`_, `#234 <https://github.com/skvadrik/re2c/issues/234>`_, `#238 <https://github.com/skvadrik/re2c/issues/238>`_ - Fixed handling of newlines: + correctly parse multi-character newlines CR LF in ``#line`` directives + consistently convert all newlines in the generated file to Unix-style LF - Changed default tarball format from .gz to .xz. + `#221 <https://github.com/skvadrik/re2c/issues/221>`_: big source tarball - Fixed a number of other bugs and resolved issues: + `#2 <https://github.com/skvadrik/re2c/issues/2>`_: abort + `#6 <https://github.com/skvadrik/re2c/issues/6>`_: segfault + `#10 <https://github.com/skvadrik/re2c/issues/10>`_: lessons/002_upn_calculator/calc_002 doesn't produce a useful example program + `#44 <https://github.com/skvadrik/re2c/issues/44>`_: Access violation when translating the attached file + `#49 <https://github.com/skvadrik/re2c/issues/49>`_: wildcard state \000 rules makes lexer behave weard + `#98 <https://github.com/skvadrik/re2c/issues/98>`_: Transparent handling of #line directives in input files + `#104 <https://github.com/skvadrik/re2c/issues/104>`_: Improve const-correctness + `#105 <https://github.com/skvadrik/re2c/issues/105>`_: Conversion of pointer parameters into references + `#114 <https://github.com/skvadrik/re2c/issues/114>`_: Possibility of fixing bug 2535084 + `#120 <https://github.com/skvadrik/re2c/issues/120>`_: condition consisting of default rule only is ignored + `#167 <https://github.com/skvadrik/re2c/issues/167>`_: Add word boundary support + `#168 <https://github.com/skvadrik/re2c/issues/168>`_: Wikipedia's article on re2c + `#180 <https://github.com/skvadrik/re2c/issues/180>`_: Comment syntax? + `#182 <https://github.com/skvadrik/re2c/issues/182>`_: yych being set by YYPEEK () and then not used + `#196 <https://github.com/skvadrik/re2c/issues/196>`_: Implicit type conversion warnings + `#198 <https://github.com/skvadrik/re2c/issues/198>`_: no match for ‘operator!=’ in ‘i != std::vector<_Tp, _Alloc>::rend() [with _Tp = re2c::bitmap_t, _Alloc = std::allocator<re2c::bitmap_t>]()’ + `#210 <https://github.com/skvadrik/re2c/issues/210>`_: How to build re2c in windows? + `#215 <https://github.com/skvadrik/re2c/issues/215>`_: A memory read overrun issue in s_to_n32_unsafe.cc + `#220 <https://github.com/skvadrik/re2c/issues/220>`_: src/dfa/dfa.h: simplify constructor to avoid g++-3.4 bug + `#223 <https://github.com/skvadrik/re2c/issues/223>`_: Fix typo + `#224 <https://github.com/skvadrik/re2c/issues/224>`_: src/dfa/closure_posix.cc: pack() tweaks + `#225 <https://github.com/skvadrik/re2c/issues/225>`_: Documentation link is broken in libre2c/README + `#230 <https://github.com/skvadrik/re2c/issues/230>`_: Changes for upcoming Travis' infra migration + `#239 <https://github.com/skvadrik/re2c/issues/239>`_: Push model example has wrong re2c invocation, breaks guide + `#241 <https://github.com/skvadrik/re2c/issues/241>`_: Guidance on how to use re2c for full-duplex command & response protocol + `#243 <https://github.com/skvadrik/re2c/issues/243>`_: A code generated for period (.) requires 4 bytes + `#246 <https://github.com/skvadrik/re2c/issues/246>`_: Please add a license to this repo + `#247 <https://github.com/skvadrik/re2c/issues/247>`_: Build failure on current Cygwin, probably caused by force-fed c++98 mode + `#248 <https://github.com/skvadrik/re2c/issues/248>`_: distcheck still looks for README + `#251 <https://github.com/skvadrik/re2c/issues/251>`_: Including what you use is find, but not without inclusion guards - Updated documentation and website.
jperkin
pushed a commit
that referenced
this issue
Oct 19, 2020
This notably fixes a security issue, CVE-2020-27197. Version 1.1.118: * #247 [CVE-2020-27197] Avoid SSRF on parsing XML (@orsinium) Version 1.1.117: * #244 SSL Verify Server not working correctly (@motok) (@nschwane) * #245 Unicode lxml.etree.SerialisationError on lxml 4.5.0+ (@advptr) Version 1.1.116: * #240 PY3 Compatibility changes for HTTP Response Body (@nschwane) Version 1.1.115: * #239 Convert the HTTP response body to a string type (PY3 this will be bytes) (@sddj) Version 1.1.114: * #237 Support converting dicts to content bindings (@danielsamuels) * #238 Provide XMLParser copies instead of reusing the cached instance. Prevents future messages to lose namespace Version 1.1.113: * #234 Add ability to load a configuration file when executing a script * #232 Fix TLS handshake failure when a server requires SNI (@marcelslotema) Version 1.1.112: * #227 Fixes to poll_client script (Python3 compatibility) * #226 Clean-up documentation warnings * #228 Fix 'HTTPMessage' has no attribute 'getheader' (Python3 compatibility) * #225 Fix checks that involve xpath (lxml) to prevent FutureWarning message * #230 Fix parsing status message round-trip (@danielsamuels) Thanks leot@ and pkgsrc's security team for the heads up! Pull-up to be requested.
jperkin
pushed a commit
that referenced
this issue
Jan 16, 2021
Features: -Show confirmation dialog before deleting queue (#227) -Expose gapless playback config option (#369) -Add select artist dialog when multiple artists (#375) -Separate search and search results views (#219) -Show screen title in "pop view" hint (#376) Maintenance: -Fix: Do not announce unplayable tracks via MPRIS (#349) -Set view title for "Similar tracks" -Fix search command and update docs (#353) -Enable mouse scrolling in TabViews (#363) -Fix not setting country correctly in Spotify API calls (e.g. search) (#370) -Fix: convert duration to i64 to avoid overflow. Previously this would break MPRIS updates when playing long podcast episodes. -Build fix: Pin syn to 1.0.57 (#385)
jperkin
added a commit
that referenced
this issue
Mar 11, 2021
pkgsrc changes:
* Stop pretending that share/bash-completion.d is supported, it isn't.
Packages that are installing files there should install them into
share/bash-completion/completions instead.
* Stop installing profile.d script, only really makes sense under /etc,
and it wasn't correctly handled as a configuration file anyway.
bash-completion (2.11)
[ Alexander Meshcheryakov ]
* _known_hosts_real: check that ruptime is present before calling
(#390)
[ Andrew Gaul ]
* totem: reuse kaffeine completions (#372)
[ Damien Nadé ]
* __reassemble_comp_words_by_ref: avoid triggering nounset on
indirect references
[ Felix Lechner ]
* lintian: complete paths for Ubuntu's .ddeb and Debian's buildinfo
files (#397)
[ Felix Yan ]
* ip: complete route add table arg
* ip: style fixes similar to ip-netns
* ip: add more completions for ip-rule
* ip: add support for netns (#391)
* ip: improve completion of route subcommands (#326)
[ Hans-Christoph Steiner ]
* unzip, zipinfo: complete *.aar (#428)
[ Jakub Jelen ]
* ssh: add new -Q completions in OpenSSH 8.2p1 (#400)
[ Kevin Locke ]
* python: support executables with minor version (#389)
[ Michal Suchánek ]
* insmod, modinfo, modprobe: support xz compressed modules (#401)
[ Phan Duc Nhat Minh ]
* tshark: complete -r arg with all filenames (#422)
[ Sebastian Jakubiak ]
* openssl: update -starttls completions (#403)
* _filedir*: update link to bug-bash discussion on -X (#404)
* test/python: add testcase for submodule completion
[ Ville Skyttä ]
* Release 2.11
* extra/make-changelog: check and output usage message
* pre-commit: anchor exclude patterns
* pytest: rewrite in bash, support toplevel funcs, avoid nondef ones
and classes
* test/xfreerdp: skip --help failure cases
* test/tshark: fix multiple -O completion with no http2 support
* test/ant: avoid complete-ant-cmd.pl interference with ANT_ARGS
* _xinetd_services: avoid nounset error on bash 4.2
* pre-commit: upgrade isort to 5.1.4
* pre-commit: upgrade pyupgrade to 2.7.2
* pre-commit: add pyupgrade, run it
* test/ant: gitignore all target cache files
* _known_hosts_real: exclude Host negations
* pre-commit: upgrade isort to 5.0.7
* pre-commit: update shellcheck-py URL
* test/inputrc: do not set print-completions-horizontally
* test/inputrc: comment typo fix
* pytest: complete async test class methods
* __get_cword_at_cursor_by_ref: fix regression on bash 4.2
* test: upgrade markdownlint-cli to 0.23.2
* _known_hosts_real: avoid errors in nounset mode on Ubuntu 14 and
16
* _longopt: exclude too many dashes, allow underscores, require ends
with alnum
* _included_ssh_config_files: support globs
* _known_hosts_real: prevent unwanted pathname expansion on host
entries
* test/shfmt: upgrade to 3.1.2, reformat with it
* test/_known_hosts_real: add explicit no globbing test case
* test: upgrade mypy to 0.782
* CONTRIBUTING.md: add posix and nounset mode item
* test: upgrade mypy to 0.781
* test: upgrade perltidy to 20200619
* _known_hosts_real: fix completion of Host entries after a wildcard
etc
* _known_hosts_real: fix # handling in ssh configs
* test: upgrade flake8 to 3.8.3
* test/xhost: multiple expected result handling fixes
* test/slapt-src: single expected result handling fixes
* test: partial hostname completion fixes
* test: simplify completion parsing
* test/dpkg-query: mark as xfail on non-Debian based systems
* .gitignore: clean up some no longer needed ignores
* test/lspci: skip -A arg test if lspci fails -A help, e.g. busybox
lspci
* test: regex escape our magic mark for completeness
* test: upgrade mypy to 0.780
* test/_known_hosts_real: don't modify class scoped base expected
list
* test/_known_hosts_real: reset COMP_KNOWN_HOSTS_WITH_HOSTFILE
between tests
* test/_known_hosts_real: tolerate duplicates
* bash_completion: trivial cleanups
* gcc: avoid errors in nounset mode
* pytest: fix test class method completion with BSD awk
* man, mutt: avoid errors in nounset mode on Ubuntu 14 and 16
* java, make: avoid errors in nounset mode on Ubuntu 14 and 16
* README: document GNU make build requirement
* pytest: add test class method completion
* _known_hosts: avoid errors in nounset mode and no arguments
* bash_completion: fix array set checks with empty elements in them
* *: avoid more errors in nounset mode
* cfrun: fix $hostfile leak
* _command_offset, route: cleanups
* *: avoid more errors in nounset mode
* qemu: add -machine arg completion
* qemu, sbopkg: avoid unintentional globbing on option arg
completions
* test: enable shellcheck SC2035
* *: drop support for bash 4.1
* _init_completion: fix unassigned redirect completion in nounset
mode
* ip: route shfmt, arithmetic evaluation
* _filedir: avoid unbound variable error on Ubuntu 14 and 16
* _pids, _pgids, _pnames: improve shfmt formatting
* scp, sftp, ssh: fix completion on options bundled with -4/-6
* modprobe, tshark, _included_ssh_config_files: use [[ ]] instead of
[ ]
* test/runLint: warn about [ ] instead of [[ ]] use
* test: skip various tests if we don't get a useful usage message
* *: mark nounset mode as supported, issues with it are bugs now
* *: avoid more errors in nounset mode
* *: avoid more errors in nounset mode
* *: avoid more errors in nounset mode
* test/inputrc: comment and whitespace tweaks
* *: avoid more errors in nounset mode
* test/unit: sort files included in dist
* test/unit: include test_unit_known_hosts_real.py in dist
* bash_completion: line wrapping tweaks, NFC
* 7z: fix -o/-w attached arg completion
* postfix: try to arrange a fake tty so we can tickle the usage
message out
* _bashcomp_try_faketty: new function to try running command with a
fake tty
* mr: avoid herestrings, simplify command parsing
* test/mr: handle missing "clean" with skipif
* test: mark known non-ASCII issues with test suite as xfail
* dpkg-deb: add --raw-extract and -X arg completions
* test: add some dpkg-query test cases
* dpkg-deb: fix --show/-W completion
* test: upgrade markdownlint-cli to 0.23.1
* *: use more arithmetic evaluation
* test: try harder to restore environment and cwd on failures
* *: use $ifs for storing/restoring $IFS
* test/irb: xfail options test if --help is not available
* test: upgrade flake8 to 3.8.1
* test: pre-commit config cleanups, ordering
* test: upgrade pre-commit to 2.4.0+, drop shfmt kludge
* test: sync shfmt and shellcheck configs
* test: shfmt bashrc
* test: remove unused run-shellcheck, shellcheck is in pre-commit
now
* test: remove old test suite code no longer used \o/
* test/_known_hosts_real: port remaining test cases to
pytest+pexpect
* test: remove more no longer needed old test suite code
* test/_known_hosts_real: port more test cases to pytest+pexpect
* test/_get_cword: port remaining test case to pytest+pexpect
* test: replace some echos with printfs
* test/_filedir: fix shutil.rmtree on Python < 3.6
* test/_expand: port remaining test cases to pytest+pexpect
* test: drop some no longer needed old test suite code
* test/_filedir: port remaining test cases to pytest+pexpect
* test: run all Travis jobs on dist: bionic
* test: drop not needed sudo on Travis
* test/_filedir: port more test cases to pytest+pexpect
* test/__expand_tilde_by_ref: port remaining test cases to
pytest+pexpect
* test/_get_comp_words_by_ref: convert remaining test cases to
pytest+pexpect
* test: run pytest --verbose in docker
* lftp: use "bookmark list" command to list bookmarks
* test: drop some no longer needed old test suite code
* test/slapt-src: convert remaining test case to pytest+pexpect
* _xfunc: simplify
* apt-cache: avoid nonzero exit code from _apt_cache_packages
* test/slapt-get: convert remaining test case to pytest+pexpect
* test/secret-tool: add to test command list
* test/scp: port remaining test case to pytest+pexpect
* test/umount: convert remaining test case to pytest+pexpect
* secret-tool: new completion
* apt-get: complete build-dep with dirs
* travis: use golang 1.14 for shfmt
* *: run all shell code through shfmt -s
* pre-commit etc: add shfmt
* test: fix incorrect fixtures/shared/default xfails/expectations
* test: upgrade markdownlint to 0.23.0
* nmap: simplify help scraping a bit, don't try to emit unnecessary
newlines
* test: prefix fake test commands with underscore
* test: port most umount test cases to pytest+pexpect
* test: add note about unescaped assert_complete single return
values
* editorconfig: apply yaml settings to .yaml too
* pre-commit: use local perlcritic hook
* *: doc and comment link updates
* pre-commit, *.md: add markdownlint, address findings
* README: clarify loading automatically on demand
* ssh-keygen: -O arg updates and improvements
* ssh-keygen: add -b arg completions according to specified -t
* ssh-keygen: option and arg completion updates for new versions
* _command: improve commentary
* reportbug, scp, sftp, svn: use compgen -c instead of _command
* find: fix -exec etc argument and its completion
* extra: trigger docker builds only on test-cmd-list.txt changes
* test: add script to maintain list of executables for full test
coverage
* test: run lint tests on Travis in a quickish separate first stage
* test/make: mark more cases as requiring command
* make: add bmake alias
* test: run pre-commit on host instead of docker
* test: add perlcritic to pre-commit, run on all perl
* *: remove some unused variables, thanks to shellcheck SC2034
* *: various loop iteration improvements
* crontab: fix loop over already given args
* apt-cache: fix command mode handling
* doc: add loop variable naming guideline
* test: make at-point completion tests easier
* ssh, xsltproc: address shellcheck SC2006
* scp: work around shellcheck SC1003
* mutt: address shellchec SC2236
* wget: address shellcheck SC2116
* pytest: address shellcheck SC2002
* bash_completion, java, tipc: for loop whitespace consistency
tweaks
* *: more arithmetic evaluation cleanups, thanks to shellcheck
SC2004
* __reassemble_comp_words_by_ref, java: address and work around
shellcheck SC2102
* test: enable parallel pre-commit shellcheck
* test: remove shellcheck severity filter, add explicit disables
instead
* doc: recommend arithmetic evaluation
* *: array subscript cleanups
* ssh-keygen: -s and -n completion improvements
* *: enable and address shellcheck SC2053
* bash_completion, invoke-rc.d, svcadm: trivial cleanups
* *: replace various conditional expressions with arithmetic
evaluation
* carton: fix command parsing with BSD sed
* nmap: fix option parsing with BSD sed
* test/alias: port remaining test case to pytest+pexpect
* test: generalize complete at point test
* test/cd: fix test_dir_at_point for setups that repeat "trailer"
* pytest: add some option arg (non-)completions
* pytest: complete test classes
* pgrep, pkill: add --ns and --nslist arg completions
* test: run skipif and xfail commands without caring if they output
or not
* test: make it possible to not care whether command did output or
not
* test/xfreerdp: skip xfreerdp kbd test if kbd-list returns empty
* test: tolerate duplicates from compgen actions
* test: bump shellcheck severity to warning + some disables
* *: address shellcheck SC2046
* test/lib/library.sh: address shellcheck SC2125
* java, pkgadd, sysbench: address shellchec SC2124
* scp: address shellcheck SC2089 and SC2090
* _filedir_xspec: address shellcheck SC2140
* rpm, ssh, umount.linux: address shellcheck SC2120
* cvs, modprobe, sh: address shellcheck SC2209
* mutt: address shellcheck SC2088
* _upvar, _upvars, _variables, rpm: address shellcheck SC1083
* test/run: address shellcheck SC2164
* renice: address shellcheck SC2254
* tipc: comment grammar and spelling fixes
* man, perl, route, tipc: address shellcheck SC2053
* info, java: address shellcheck SC2153
* quote_readline: fix $ret leak
* test: upgrade shellcheck to 0.7.1
* test/printenv: xfail if --help doesn't contain options (e.g.
busybox)
* test/aptitude: require command where necessary
* _known_hosts_real, op: address shellcheck SC2184
* test: don't run shellcheck on completions/.gitignore
* protoc: complete all --*_out without more specific handling with
dirs
* sysbench: add --test= deprecation TODO
* pkgadd: indentation fix
* chronyc, wvdial: address shellcheck SC2178
* java, pkgadd, sysbench: address shellcheck SC2124
* mplayer: address shellcheck SC1078 false positive
* smartctl: hush shellcheck SC2054 false positives
* *: address shellcheck SC2221 and SC2222
* bash_completion: address shellcheck SC2220
* crontab, wodim: silence shellcheck SC2191 and SC2192
* aptitude: add some option arg (non)completions
* aptitude: parse options list from --help, hardcode less
* test/aptitude: add some test cases
* *: argument interation improvements
* *: whitespace tweaks
* apt-get etc: use _apt_cache_packages from apt-cache
* pre-commit: run most python checks on helpers/python too
* test/ldd: xfail if --help is not implemented
* test/printenv: require command for arg completion test
* printenv: indentation fixes
* test: upgrade mypy to 0.770
* test: split dependencies requiring Python 3.6.1+ to requirements-
dev.txt
* git: trigger docker rebuild on pre-commit config change
* test: require openssl command for option argument tests
* test: move perltidy to pre-commit, run with --converge
* test: move shellcheck to pre-commit
* test: ignore flake8 messages that are in black's domain
* _xinetd_services: look up from $BASHCOMP_XINETDDIR, add some unit
tests
* printenv: new completion
* copyright: add 2020
* test: fix CompletionResult.__eq__ UnboundLocalError
* test: run pre-commit in tools container
* test: shellcheck tweaks
* test: add isort to pre-commit, run it
* test: add flake8-bugbear
* test: install black for Python 3.6 too
* pre-commit: add config with black, flake8, and mypy
* test: drop redundant black args from docker runs
* *: python type hint fixes and improvements
* extra/make-changelog: run through black
* test/totem: add basic test case
* test/cd: remove unused import
* openssl: complete -writerand with filenames
* openssl: parse available options from $command -help
* openssl: support getting digest list from more recent openssl
versions
* nmap: handle options split on equals sign
* nmap: parse options from -h output
* test/cd: make dir_at_point produce better debuggable failures
* test/cd: convert remaining test case to pytest+pexpect
* test: remove some no longer needed old test suite code
* test/chown,sudo: parametrize special case test, improve xfail
targeting
* test/tsig-keygen: require command for test_options
* test/upgradepkg: port remaining test case to pytest+pexpect
* tsig-keygen: new completion
* test: host helper lint and usage fixes
* test: port some _known_hosts_real unit tests to pytest+pexpect
* test: remove some no longer needed tcl/expect code
* test: fix spurious hosts fixture failure without avahi-browse
installed
* test: port some scp test cases to pytest+pexpect
* test: port remaining finger, sftp, ssh, and xhost cases to
pytest+pexpect
* lilo: work around shellcheck false positive
* test/ipcalc: fix tests with busybox ipcalc
* chromium-browser, firefox: complete on *.txt (#379)
* README.md: add introduction
* ipcalc: new completion
* *: complete commands when prefixed with a backslash
* test/wol: don't fail MAC test if test system has /etc/ethers
entries
* test/dnssec-keygen: allow more alternatives in algorithm
completion
* lilo: don't complete on commented out labels
* lilo: honor -C when completing labels
* lilo: add -B and -E completions
[ beantaxi ]
* Source user completion only if it's a file (#409)
[ hugoziviani ]
* jarsigner: complete on *.apk too (#386)
* cryptsetup: add luksChangeKey arg completion (#380)
-- Ville Skyttä <ville.skytta@iki.fi> Sat, 25 Jul 2020 11:25:09 +0300
bash-completion (2.10)
[ Felix Lechner ]
* perltidy: associate *.t (#338)
[ Gabriel F. T. Gomes ]
* perl: fix completion with space between option and argument
[ Grisha Levit ]
* _variables: add TERM and LC_* completion (#353)
[ Iñigo Martínez ]
* autotools: Replace pkgdatadir with datadir
* pkg-config: Relative paths
* pkg-config: generate Name from autotools PACKAGE
[ Jakub Jelen ]
* ssh: option and argument completion updates (#332)
[ Michał Górny ]
* test_arp: Skip if ARP tables are empty
* test_chromium_browser: Skip test_2 if 'chromium-browser --help'
fails
* test_rpm2tgz: Fix expected output
[ Sebastian ]
* cppcheck: Add new standards to --std option. (#356)
[ Tomasz N ]
* apt-get: fix pkg version completion if it contains a colon (#351)
[ Ville Skyttä ]
* test: bump black to >=19.10b0
* ssh, scp, sftp, ssh-copy-id, curl: improve identity file
completion
* update-rc.d: indentation fix
* update-rc.d: remove dead code
* screen: add serial device basic arg (non)completion
* screen: add //telnet completion
* test: add some trivial perl -E/-e cases
* perl: indentation fixes
* curl: make @filename completion do the right thing with dirs
* _filedir: avoid duplicate dirs internally, and a compgen -d call
for files
* _filedir: remove unused $x
* bash_completion.sh: shellcheck SC2086 fixes
* test: shellcheck config cleanups
* shellcheck: add some option arg (non)completions
* test: fix cpio users test in presence of usernames with whitespace
* test: python typing fixes
* test: add minimal mypy config
* .gitignore: mypy cache
* makepkg: fix option completion
* test: mark dcop and mr testcases requiring the cmd as such
* CONTRIBUTING: disable e-mail bug gateway due to spam
* carton: new completion
* op: direct command parsing stderr to /dev/null
* test: adjust java expectations based on whether jars can be listed
* valgrind: look tool names from lib/*-linux-gnu dirs too
* test: xfail locale-gen option completion if --help is not
available
* _sysvdirs: always return 0
* java: don't assume jar is installed
* travis: test with Debian 10
* wine: install for wine-development and wine-stable too
* travis: generate dist tarball on alpine
* dmypy: new completion
* test: add require_longopt xfail helper, use it
* test: mark more tests that parse command output as requiring
command
* sysctl: invoke completed sysctl instead of one from path to get
variables
* screen, smartctl, update-alternatives: _parse_help, drop hardcoded
option list
* lintian-info: _parse_help, add more option arg (non)completions
* gprof: _parse_usage, drop hardcoded option list
* test: fix retrieving command to test from request
* travis: pass NETWORK as env var, so we can actually use it
* test: xfail MAC address completion without networking
* test: ignore _makepkg_bootstrap in makepkg test env
* test: hush flake8-bugbear B010
* test: don't sort expected completion lists under the hood
* test: add bunch of basic option parsing test cases
* test: always run tests which don't require tested command
* test: explodepkg and upgradepkg test fixes
* test: mark sbcl-mt xfail due to whitespace split issues
* _terms: search directly from various terminfo dirs
* _terms: combine and simplify somewhat
* pkg-get: fix $i leak
* pkgutil: fix $i leak
* test: portinstall/upgrade test case and setup fixes
* lvm pv*, vg*: parse help instead of hardcoding option list
* ipv6calc: parse help instead of hardcoding option list
* test: avoid some sed -r/-E runLint false positives
* test: use sh +* as ccache command test case
* java: make jar/zip listing work with unzip
* test: installpkg test fixes
* test: fix acroread fixture dir
* test: remove unnecessary returns after pytest.skip
* test: avoid gnome-mplayer core dump on Ubuntu 14
* xvfb-run: new completion
* test: skip gssdp-discover --message-type when option not available
* test: expect failures for bc without --help useful with _longopt
* test: don't expect a .tox dir in fixture
* test: drop sourcing our no longer existing profile.d script
* tox: include -- in option completions
* tox: complete defaults after a --
* gssdp-discover: new completion
* test: register our pytest markers to hush warnings from 4.5+
* test: fix required pytest version
* ip: invoke the tool as $1
* README: drop distro badges, link to Repology instead
* chromium-browser: add --proxy-server arg completion
* test: source our profile.d test env script in docker
* influx: new completion
* README: badge title tweaks
* tox: do simple parse on tox.ini if --listenvs* yields nothing
* test: add basic tox fixture
* man: fall back to _parse_usage for _parse_help
* test_wsimport: xfail options test on unparseable -help
* test: don't try to install black on Python < 3.6
* pgrep: fix fallback to _parse_usage
* test: xfail unparseable mock and munin-node-configure --help cases
* test_pwdx: xfail more unparseable help cases
* build: make pytest executable configurable, look for pytest-3 too
* test: enforce minimum pytest version
* test: zopflipng flake8 fix
* test: xfail getent and pwdx option completions with unparseable
--help
* test: add more basic _parse_help use test cases
* test: add bunch of basic _parse_help use test cases
* .gitignore: add configure.lineno
* badblocks: fix $i leak
* postfix: option completion is expected to fail at the moment
* cal: try _parse_help before _parse_usage
* test: add bunch of basic _parse_usage use test cases
* chsh, pwck: try _parse_help before _parse_usage
* test: add basic autossh test
* test: convert more _filedir unit tests to pytest+pexpect
* test: flake8 fix
* test: convert bunch of _filedir unit tests to pytest+pexpect
* test: convert finger partial test case to pytest+pexpect
* README: add some badges, tweak existing
* test: port _variables unit tests to pytest+pexpect
* test: port compgen and quote tests to pytest+pexpect
* iconv, lz4, tipc, xsltproc: replace some seds with compgen -X
* test: disallow Alpine failure on Travis
* _pnames: adapt for busybox ps, rewrite in pure bash
* test: run our docker script in test containers by default
* test: use one Dockerfile for all dists
* test_ifup: accept short option completions too
* timeout: fallback to _parse_usage from _parse_help
* test_wget: test --s instead of --h
* test_lsusb: xfail with unparseable --help
* test: expect failures for various completions without useful
--help
* test: support xfail in our markers like skipif, use it a lot
* test: add Alpine Linux container, allow failures for now
* iconv: weed out ... from encoding completions
* test_iconv: add basic file completion test
* test_iconv: skip option completion if --help fails
* test_getconf: skip if -a doesn't output any POSIX_V*
* test_feh, test_makepkg: invoke grep as "command grep"
* test: generalize check whether we're being run in a container
* tar: simplify locating tarball from command line
* pkg_delete: don't limit to FreeBSD
* test: reformat test_chromium_browser.py source
* test: set up BASH_COMPLETION_COMPAT_DIR in bashrc (only)
* test: more thorough system location interference avoidance
* test: bashrc comment and whitespace tweaks
* build: makefile whitespace tweaks
* build: really reset return value before completions check
* build: simplify symlink setup
* tar: add missing bsdtar, gtar, and star symlinks
* README: use light gray badges for unknown versions
* README: link to cygwin package
[ Wolf ]
* ri: hush some warnings
[ andreabravetti ]
* unrar: complete on *.exe (#337)
[ ezr ]
* chromium-browser: Add support for .mhtml files
[ jerkey ]
* screen: complete first arg with serial devices
[ marxin ]
* gcc: support new --completion option (#222)
[ pcc ]
* unzip, zipinfo: complete *.aab (#340)
[ versat ]
* cppcheck: Remove deprecated option 'posix' for '--std='
-- Ville Skyttä <ville.skytta@iki.fi> Thu, 05 Dec 2019 17:04:26 +0200
bash-completion (2.9)
[ Antonio Terceiro ]
* dpkg-source: Add --before-build --after-build --commit, and
--print-format
[ Gabriel F. T. Gomes ]
* xm: Deprecate completion for obsolete command (#284)
* _filedir_xspec: Fallback to suggesting all files if requested
(#260)
* tar: Support completions for zstd compression extensions (#255)
* dpkg: List held packages (#250)
* cvs: Add completion for the log command
[ Guillaume Mella ]
* unzip, zipinfo: Associate with *.xar (eXist-db application
package) (#257)
[ Igor Susman ]
* mplayer: Associate with *.w64
[ Jaak Ristioja ]
* okular: Added support for xz-compressed files.
[ John Swinbank ]
* _xspecs: Declare as global on bash >= 4.2
[ Kevin Locke ]
* test: Increase expect pty to 160 columns
* test: avoid interrupting magic mark output
[ Per Lundberg ]
* 7z: add .msi support
[ Peter Wu ]
* tshark: speed up tshark -O completion
* tshark: fix completion of -Xlua_script option
* tshark: Support preferences (-o) completion with memoization
* test: fix misinterpretation of completion output in tests
* test: fix flake8 complaints about unused imports
* conftest: fix RemovedInPytest4Warning due to use of
node.get_marker
* chromium-browser: consider chrome and chromium as aliases
* tshark: support .gz and .cap files for -r expansion
* tshark: prevent a single-character file from breaking -G
completion
* tshark: update -T and -t completions
[ Russell Davis ]
* man: Fix completion when failglob option is enabled (#225)
[ Timo Taipalus ]
* mplayer: Add common supported module music formats
[ Tomasz N ]
* _longopt: pick first long option on a line, not last
[ Ville Skyttä ]
* *: avoid shellcheck SC1007 and SC1010
* 7z: add some TODO notes on parsing "i" output for extensions
* ssh: make -o protocol completion less hardcoded
* ssh: make option completion case insensitive
* ssh: fix suboption completion with combined -*o
* xvnc4viewer: code cleanups
* doc/testing: remove lots of legacy info, add some new
* CONTRIBUTING: add upstream vs bash-completion considerations
* CONTRIBUTING: note runLint and run-shellcheck
* __parse_options, 7z: avoid herestrings
* arp, ccze, ifstat, inotifywait, makepkg: invoke sed with "command"
* shellcheck: disable bunch of warnings when in "-S warning" mode
* test: move default shell option from run-shellcheck to
.shellcheckrc
* test: make runLint search for herestrings
* tar, valgrind: avoid some herestrings
* travis: run shellcheck on bash_completion.sh.in too
* travis: fail on shellcheck errors
* make: quote eval array definitions to work around shellcheck
SC1036 bug
* test: add make -C test case
* *: shellcheck error fixes
* _included_ssh_config_files: store found included files in an array
* _included_ssh_config_files: doc grammar fixes
* test: add invoke-rc.d test case for not repeating already given
options
* ebtables: improve existing table arg parsing
* test: add script to run shellcheck, run it in Travis, allowing
failure for now
* iptables: improve existing table arg parsing
* test: shorten long gdb test core file name so tar doesn't croak on
it
* AUTHORS: remove unrelated project association from my entry
* apt-get: protect source against regex specials
* mypy, mysql, xmms: don't complete unknown split long option args
* synclient: remove unused local variable "split"
* test: adjust _get_comp_words_by_ref test to changed error output
* apt-cache: protect showsrc against regex specials
* test: improve tshark -O arg completion test
* tshark: ignore stderr when parsing -G, -L, and -h output
* *: error output consistency, use bash_completion prefix
* _upvar: deprecate in favor of _upvars
* *: add missing "ex: filetype=sh"
* phing: fix getting just a tab for options on CentOS 6
* phing: don't complete -l with files
* various: apply file vs dir special cases also when invoked with
full path
* *: whitespace tweaks
* ssh: don't offer protocol v1 specific options if it's not
supported
* test: add some gdb non-core files
* _parse_help: look for long options somewhat more eagerly
* gdb: relax core filename pattern
* test/tools: fix exit status incrementation
* *: arithmetic expression related cleanups
* test/tools: run all tools, don't stop at first failure
* test: check for perltidy errors and warnings
* *: format Perl code with perltidy
* *: format Python code with black
* .dir-locals.el: use flycheck-sh-bash-args
* valgrind: look up tools from libexec dirs too
* *: make _parse_usage fallbacks more concise
* svn, svk, wget: use _iconv_charsets
* *: spelling fixes
* msynctool: code cleanups
* *: remove whitespace after redirections
* *: remove spaces immediately within $()
* bzip2: recognize *.tbz2 as bzipped
* modprobe: module parameter boolean values
* ping, tracepath: parse options primarily with _parse_help
* ulimit: new completion
* shellcheck: new completion
* dnssec-keygen: new completion
* modprobe: append = to module parameter completions
* test: include test_unit_longopt.py in dist
* test: add some _longopt unit tests
* _longopt: simplify regex, use printf instead of echo, drop
unnecessary sort
* nsupdate: new completion
* _longopt: don't complete --no-* with file/dirname arg
* copyright: add 2019
* pytest: complete --pythonwarnings/-W arg
* python: make warning action list reusable
* test: use pytest-xdist
* extra: add git pre-push hook for triggering Docker Hub builds
* post-commit: trigger on test/requirements.txt too
* pytest: complete pytest-xdist --dist, --numprocesses, and
--rsyncdir
* test: remove no longer needed completion/*.exp
* xfreerdp: reinstate support for old versions with dash option
syntax
* test: rewrite "generate" in Python, fix trailing backslash in
EXTRA_DIST
* test: sort t/Makefile.am EXTRA_DIST in C locale
* ssh: support RemoteCommand and SyslogFacility options
* test: Expect failure for chown all users test as non-root
* test: Fix declare test case with bash 5.0
* adb: Deprecate in favor of one shipped with the Android SDK
* xfreerdp: Update for more modern xfreerdp
* jsonschema: New completion
* test: Remove unnecessary ri xfail
* test: Clean up man tmp dir
* .gitignore: Add .python-version (for pyenv)
* test: Remove unnecessary autouse=True from fixtures
* ifstat: Make work with iproute2 version
* iperf, iperf3: Add some option arg (non-)completions
* test: Fix test generation wrt results checking improvements
* ifstat: New completion
* __parse_options: Avoid non-zero exit status
* test: Refactor/improve completion results checking
* test: Match Python's default locale unaware sort in bash setup
* test: Rename completion.line to .output
* test: Add man failglob test case
* test: Add pre_cmds support for completion fixture
* inotifywatch: New completion, common with inotifywait
* inotifywait: Fix -e completion with BSD sed
* inotifywait: Avoid some false positive event names
* test: extend _ip_addresses unit tests some
* _ip_addresses: Avoid completing ipv4 ones with -6
* inotifywait: New completion
* test: Mark some xfails based on if in docker instead of in CI
* test: Skip ifup options test if it doesn't grok --help, not in CI
* test: Clean up and docker-ignore __pycache__ dirs
* build: Include test/t in dist tarball
* test/t: Avoid trailing backslash in Makefile.am's to appease
automake
* test: Remove some no longer used old test suite code
* _xspecs: Simplify bash version check
* chmod: Fix "-" completion
* sysctl: Treat -f as alias for -p/--load
* .gitignore: Add pytestdebug.log
* chmod: Fix file completion after modes starting with a dash
* _count_args: Add 3rd arg for treating option-like things as args
* test: Fix _count_args test_7 to test intended case
* pydocstyle: New completion
* Travis: Remove unused PYTEST env var
* doc: Note email issues gateway
* tcpdump: Various option and their arg completion updates
* test: Fix arp CI (non)expectations, remove redundant test case
* test: Be more consistent with "CI" env var examination and xfails
* arp: New completion, somewhat incomplete
* test: Expect failure in gkrellm if there's no X display
* doc: Update docs on generating simple tests
* doc: Some test dependency doc updates
* test: Add requirements.txt for installing dependencies
* grpck: Parse options with _parse_help, falling back to
_parse_usage
* grpck: Add --root/-R arg completion
* test suite: Ignore _scp_path_esc in env for ssh-copy-id
* ssh-copy-id: Add -i and -o arg (non-)completions
* tar: Clean up some redundant code
* cancel: Split long line
* cancel: Add some option arg (non-)completions
* locale-gen: New completion
* makepkg: Don't apply to other than Slackware makepkg
* test: Allow unknowns options in makepkg option completion
* makepkg: Use _parse_help instead of hardcoding option list
* mypy: New completion
* op: New completion
* hunspell: New completion
* xmllint: Improve --encode, --pretty, and --xpath arg
(non-)completions
* test: Remove leftover completion/ls.exp
* gcc: Add g++, gcc, gccgo, and gfortran *-[568] aliases
* perlcritic: New completion
* gnome-screenshot: New completion
* isort: New completion
* freeciv: Option and arg completion updates
* freeciv-gtk2: Install for freeciv and freeciv-gtk3, rename to
freeciv
* mplayer etc: Complete on *.crdownload partial downloads in
addition to *.part
* chromium-browser, google-chrome*: New non-xspec completion
* firefox etc: New non-xspec completion
* Merge branch 'master' into wip-pexpect
* nc: Add some more option (non-)completions
* test: Mark MANPATH without leading/trailing colons test an xfail
on CI CentOS 6
* test: Remove kill, killall remnants
* test: Make case specific env entries shell code, not escaped
* Merge branch 'master' into wip-pexpect
* unzip, zipinfo: Associate with *.whl
* __load_completion: Avoid unnecessary lookups from nonexistent dirs
* Merge branch 'master' into wip-pexpect
* gcc: Add g++, gcc, gccgo, and gfortran *-7 aliases
* test: Use test_unit_* prefix for unit tests, to avoid name clashes
* test: Support setting cmd=None to require no command, for unit
tests
* test: Misc test suite fixes
* test: Fix jq and scrub skipif commands
* test: Don't require complete marker on test methods
* test: Add support for per-test env modifications
* test: Use more conventional Python file names for tests
* test: Sort completion results in Python for ease of use in Python
tests
* test: Allow __load_completion to fail
* test: chdir to fixtures dir in Python as well
* test: Mark xfreerdp as expected failure for now
* test: Replace + with Plus in test class names
* test: Implement load_completion_for using assert_bash_exec
* test: Add ability to selectively ignore diffs in environment
* test: Fixture reorganization
* test: Pass through $HOME and $DISPLAY to test bash
* test: Log pexpect interaction to $BASHCOMP_TEST_LOGFILE if set
* test: Rename BASHCOMP_* test env variables to BASHCOMP_TEST_*
* test: Add python3 test case
* test: Add class level skipif based on bash exec result
* test: Include command name in test class name, use numbered test
method names
* test: Fix some regressions introduced in recent test conversions
* test: Add support for running test case in a specified dir
* test: Add support for skipping individual tests based on shell
command status
* test: Make test base work with Python 3.3+
* test: Add some iperf, iperf3 and xmodmap test cases
* xmodmap: Use _parse_help instead of hardcoded option list
* iperf: Improve client/server specific option parsing
* iperf: Install for iperf3 too
* iperf: Add g/G to --format completions
* xmodmap: Use _parse_help instead of hardcoded option list
* iperf: Improve client/server specific option parsing
* iperf: Install for iperf3 too
* iperf: Add g/G to --format completions
* test: Use /root/.local/bin/pytest on ubuntu14 by default
* test: Add generated test files to t/Makefile.am automatically
* test: Add new test files to EXTRA_DIST
* test: Use /root/.local/bin/pytest on centos6 by default
* test: Use make pytest docker executable env-configurable, default
pytest-3
* test: Update generate for pytest+pexpect
* test: Convert majority of test cases to pytest+pexpect
* tox: Fall back to --listenvs for env list if --listenvs-all fails
* git-post-commit: Avoid some error trash when HEAD is not a
symbolic ref
* test: Add pylint-3 test case
* test: Limit number of pylint option completions
* pydoc, pylint: Determine python2/3 based on command basename only
* pylint: Bring -f/--format arg completion up to date with pylint
1.9.2
* pylint: Implement comma separated --confidence arg completion
* test: Fix buffer size option listing in run --help
* test: Bump expect's match_max to 20000 by default
* test: Run docker tests with --verbose
* _services: Try systemctl list-unit-files if systemctl list-units
fails
* extra/git-post-commit.sh: Add git post-commit Docker Hub trigger
hook
* gpgv: New completion
* pydoc, pylint: Skip module completion if current looks like a path
* travis: Run ubuntu14/bsd with no network
* travis: Split long lines in script
* test: Limit number of wget option completions to avoid unresolved
result
* test: Mark flake8 untested if it seems broken
* pylint: Option arg completion improvements
* tshark: Get available interfaces from -D output
* ngrep: Add "any" to -d arg completions
* fio: New completion
* test: Fix iwspy test case
* uscan: Use _parse_help instead of hardcoded option list
* urlsnarf: Add -p arg completion
* tracepath: Add -m and -p arg non-completions
* tracepath: Actually use our separate completion instead of
_known_hosts
* test: Skip jq option completion test if its --help doesn't list
them
* xdg-settings: Make help parsing work on BSD
* test: Support running with local BSD binaries, do it w/ ubuntu14
in CI
* jq, sqlite3: Protect against negative array subscripts
* sudo: Improve long option arg handling
* sysctl: Recognize --pattern/-r and --load options
* test: Add sysctl option parsing test case
* sudo: Parse options from help/usage output, add some long option
support
* strace: Use _parse_help instead of hardcoded option list
* sshow: Add -p arg completion
* sqlite3: Add some option arg (non-)completions
* tune2fs: Update -o/-O argument lists
* jq: New completion
* reportbug: Run _parse_help and apt-cache more selectively
* querybts: Use _parse_help, not hardcoded option list, misc
improvements
* pyvenv: Support versioned 3.6-3.8 executables
* passwd: Try _parse_help before _parse_usage to parse options
* profile.d: Avoid tested variable values being confused as [ ]
operators
* cryptsetup: Add some option arg (non-)completions
* cryptsetup, nc, sh: Skip option args when counting arguments
* modinfo: Fall back to _parse_usage if _parse_help yields no
results
* mysql, mysqladmin: Complete --ssl-{ca,cert,key} option arg
* mysqladmin: Reuse --default-character-set completion from mysql
* modinfo: Use _parse_help instead of hardcoded option list
* minicom: Use _parse_help instead of hardcoded option list
* mplayer: Associate with *.S[3T]M, *.med, *.MED
* completions/Makefile.am: Use install-data-hook, not install-data-
local
* ifup etc: Add option and option argument completion
* _count_args: Add support for not counting specified option args
* ifquery: New ifup alias completion
* ngrep, tshark: Complete on *.pcapng too
* rpm: Complete --licensefiles with -q
* pytest: Rename from py.test to follow upstream recommended name
* README: Add instructions for overriding completions system wide
* README: Note $BASH_COMPLETION_USER_DIR
* test: Mark psql etc test cases untested if --help doesn't work
* aclocal, automake: Support versioned 1.16 executables
* __load_completion: Avoid bad array subscript on "commands" ending
with slash
* lzma: Use _parse_help instead of hardcoded option list
* test: Run perlcritic and flake8 on perl and python helpers in
Travis
* build: Improve cleanup of test/log and test/tmp dirs
* pkg-config: Complete on *.pc files
* build: Use AC_PROG_SED to locate sed
* build: Do cmake, pc, and profile variable replacements in Makefile
* README: Add Q/A on overriding a completion, modernize local
install answer
* json_xs: New completion
* chmod: New completion
* iperf, nc: Include IPv6 addresses in bind address completions
* links: Major rework, parse options from --help, add option arg
completion
* _ip_addresses: Add option to complete all/v4/v6 addresses, add
unit test
* wget: Remove nonexistent arg to _ip_addresses
* _filedir: Drop unnecessary evals
* iconv: Split charset completion to _iconv_charsets, add test case
* links: Install completion for links2 too
* xgamma: Comment spelling fix
* lftp: handle -s
* test: Skip scrub -p test when its --help doesn't list available
patterns
* ecryptfs-migrate-home: New completion
* scrub: New completion
* ether-wake: Install for etherwake as well
* *: Support completing arg of last bundled short option
* dselect: Parse options with _parse_help
* dhclient: Add some option arg (non-)completions
* dhclient: Parse options with _parse_usage
* chage, chpasswd: Add -R/--root arg completion
* reportbug: Add bunch of option arg (non-)completions
* .dir-locals.el: Set -O extglob for flycheck bash checks
* mount, umount: Deprecate on Linux in favor of util-linux >= 2.28
ones
* _known_hosts_real: Reimplement known hosts file parsing in pure
bash
* test: Add comment line to fixtures/_known_hosts_real/known_hosts
* ssh: Complete all *File option args with _filedir
* README: Point Debian and openSUSE badges towards unstable and
Tumbleweed
* README: Link to various distro packages
* apt-get: Add -h/-v/-o non-completions
* apt-get: Sync option list with apt 1.5.1
* apt-get: Simplify -t and friends completion, support Ubuntu
* apt-get: Add indextargets to list of suggested commands
* apt-get: Complete install package=versions
* ssh: Sync config option lists with OpenSSH 7.5p1, add some value
completions
* ssh: Sync query type list with OpenSSH 7.5p1
* ssh: Order various switch cases closer to alphabetical
* completions/Makefile: Fix check-local in VPATH builds
[ dmerge ]
* _filedir: Refactor to remove heredoc-dependent loop
[ marxin ]
* gccgo: Add as a GCC completion target (#227)
[ ovf ]
* xrandr: match the output name exactly for --mode
-- Ville Skyttä <ville.skytta@iki.fi> Sat, 27 Apr 2019 11:50:12 +0300
jperkin
pushed a commit
that referenced
this issue
Jun 4, 2021
# cli 2.5.0 * New `style_no_*()` functions to locally undo styling. New `col_none()` and `bg_none()` functions to locally undo text color and background color. * It is now possible to undo text and background color in a theme, by setting them to `NULL` or `"none"`. * `cli_memo()` was renamed to `cli_bullets()`, as it is by default formatted as a bullet list (#250). * New `ansi_toupper()`, `ansi_tolower` and `ansi_chartr()` functions, the ANSI styling aware variants of `toupper()`, `tolower()` and `chartr()` (#248). * New `test_that_cli()` helper function to write testthat tests for cli output. * `tree()` now does not produce warnings for tibbles (#238). * New inline style: `.cls` to format class names, e.g. `"{.var fit} must be an {.cls lm} object"`. # cli 2.4.0 * New `cli_memo()` function to create a list of items or tasks. * New `cli::cli()` function to create a single cli message from multiple cli calls (#170). * cli now highlights weird names, e.g. path names with leading or trailing space (#227). * Styling is fixed at several places. In particular, nested lists should be now formatted better (#221). * New `spark_bar()` and `spark_line()` funcions to draw small bar or line charts. # cli 2.3.1 * ANSI color support detection works correctly now in older RStudio, and also on older R versions. * `cli_h1()`, `cli_h2()` and `cli_h3()` now work with multiple glue substitutions (#218). # cli 2.3.0 * `boxx()` now correctly calculates the width of the box for non-ASCII characters. * New `ansi_trimws()` and `ansi_strwrap()` functions, they are similar to `trimws()` and `strwrap()` but work on ANSI strings. * New `ansi_columns()` function to format ANSI strings in multiple columns. * `ansi_substr()`, `ansi_substring()`, `ansi_strsplit()`, `ansi_align()` now always return `ansi_string` objects. * `ansi_nchar()`, `ansi_align()`, `ansi_strtrim()` and the new `ansi_strwrap()` as well handle wide Unicode correctly, according to their display width. * `boxx()` can now add headers and footers to boxes.
jperkin
pushed a commit
that referenced
this issue
Jun 15, 2021
Changes with Apache 2.4.48
*) mod_proxy_wstunnel: Add ProxyWebsocketFallbackToProxyHttp to opt-out the
fallback to mod_proxy_http for WebSocket upgrade and tunneling.
[Yann Ylavic]
*) mod_proxy: Fix flushing of THRESHOLD_MIN_WRITE data while tunneling.
BZ 65294. [Yann Ylavic]
*) core: Fix a regression that stripped the ETag header from 304 responses.
PR 61820 [Ruediger Pluem, Roy T. Fielding]
*) core: Adding SSL related inquiry functions to the server API.
These function are always available, even when no module providing
SSL is loaded. They provide their own "shadowing" implementation for
the optional functions of similar name that mod_ssl and impersonators
of mod_ssl provide.
This enables loading of several SSL providing modules when all but
one of them registers itself into the new hooks. Two old-style SSL
modules will not work, as they replace the others optional functions
with their own.
Modules using the old-style optional functions will continue to work
as core supplies its own versions of those.
The following has been added so far:
- ap_ssl_conn_is_ssl() to query if a connection is using SSL.
- ap_ssl_var_lookup() to query SSL related variables for a
server/connection/request.
- Hooks for 'ssl_conn_is_ssl' and 'ssl_var_lookup' where modules
providing SSL can install their own value supplying functions.
- ap_ssl_add_cert_files() to enable other modules like mod_md to provide
certificate and keys for an SSL module like mod_ssl.
- ap_ssl_add_fallback_cert_files() to enable other modules like mod_md to
provide a fallback certificate in case no 'proper' certificate is
available for an SSL module like mod_ssl.
- ap_ssl_answer_challenge() to enable other modules like mod_md to
provide a certificate as used in the RFC 8555 'tls-alpn-01' challenge
for the ACME protocol for an SSL module like mod_ssl. The function
and its hook provide PEM encoded data instead of file names.
- Hooks for 'ssl_add_cert_files', 'ssl_add_fallback_cert_files' and
'ssl_answer_challenge' where modules like mod_md can provide providers
to the above mentioned functions.
- These functions reside in the new 'http_ssl.h' header file.
[Stefan Eissing]
*) core/mod_ssl/mod_md: adding OCSP response provisioning as core feature. This
allows modules to access and provide OCSP response data without being tied
of each other. The data is exchanged in standard, portable formats (PEM encoded
certificates and DER encoded responses), so that the actual SSL/crypto
implementations used by the modules are independant of each other.
Registration and retrieval happen in the context of a server (server_rec)
which modules may use to decide if they are configured for this or not.
The area of changes:
1. core: defines 2 functions in include/http_ssl.h, so that modules may
register a certificate, together with its issuer certificate for OCSP
response provisioning and ask for current response data (DER bytes) later.
Also, 2 hooks are defined that allow modules to implement this OCSP
provisioning.
2. mod_ssl uses the new functions, in addition to what it did already, to
register its certificates this way. If no one is interested in providing
OCSP, it falls back to its own (if configured) stapling implementation.
3. mod_md registers itself at the core hooks for OCSP provisioning. Depending
on configuration, it will accept registrations of its own certificates only,
all certificates or none.
[Stefan Eissing]
*) mod_md: v2.4.0 with improvements and bugfixes
- MDPrivateKeys allows the specification of several types. Beside "RSA" plus
optional key lengths elliptic curves can be configured. This means you can
have multiple certificates for a Managed Domain with different key types.
With ```MDPrivateKeys secp384r1 rsa2048``` you get one ECDSA and one RSA
certificate and all modern client will use the shorter ECDSA, while older
client will get the RSA certificate.
Many thanks to @tlhackque who pushed and helped on this.
- Support added for MDomains consisting of a wildcard. Configuring
```MDomain *.host.net``` will match all virtual hosts matching that pattern
and obtain one certificate for it (assuming you have 'dns-01' challenge
support configured). Addresses #239.
- Removed support for ACMEv1 servers. The only known installation used to
be Let's Encrypt which has disabled that version more than a year ago for
new accounts.
- Andreas Ulm (<https://github.com/root360-AndreasUlm>) implemented the
```renewing``` call to ```MDMessageCmd``` that can deny a certificate
renewal attempt. This is useful in clustered installations, as
discussed in #233).
- New event ```challenge-setup:<type>:<domain>```, triggered when the
challenge data for a domain has been created. This is invoked before the
ACME server is told to check for it. The type is one of the ACME challenge
types. This is invoked for every DNS name in a MDomain.
- The max delay for retries has been raised to daily (this is like all
retries jittered somewhat to avoid repeats at fixed time of day).
- Certain error codes reported by the ACME server that indicate a problem
with the configured data now immediately switch to daily retries. For
example: if the ACME server rejects a contact email or a domain name,
frequent retries will most likely not solve the problem. But daily retries
still make sense as there might be an error at the server and un-supervised
certificate renewal is the goal. Refs #222.
- Test case and work around for domain names > 64 octets. Fixes #227.
When the first DNS name of an MD is longer than 63 octets, the certificate
request will not contain a CN field, but leave it up to the CA to choose one.
Currently, Lets Encrypt looks for a shorter name in the SAN list given and
fails the request if none is found. But it is really up to the CA (and what
browsers/libs accept here) and may change over the years. That is why
the decision is best made at the CA.
- Retry delays now have a random +/-[0-50]% modification applied to let
retries from several servers spread out more, should they have been
restarted at the same time of day.
- Fixed several places where the 'badNonce' return code from an ACME server
was not handled correctly. The test server 'pebble' simulates this behaviour
by default and helps nicely in verifying this behaviour. Thanks, pebble!
- Set the default `MDActivationDelay` to 0. This was confusing to users that
new certificates were deemed not usably before a day of delay. When clocks are
correct, using a new certificate right away should not pose a problem.
- When handling ACME authorization resources, the module no longer requires
the server to return a "Location" header, as was necessary in ACMEv1.
Fixes #216.
- Fixed a theoretical uninitialized read when testing for JSON error responses
from the ACME CA. Reported at <https://bz.apache.org/bugzilla/show_bug.cgi?id=64297>.
- ACME problem reports from CAs that include parameters in the Content-Type
header are handled correctly. (Previously, the problem text would not be
reported and retries could exceed CA limits.)
- Account Update transactions to V2 CAs now use the correct POST-AS-GET method.
Previously, an empty JSON object was sent - which apparently LE accepted,
but others reject.
[Stefan Eissing, @tlhackque, Andreas Ulm]
Changes with Apache 2.4.47
*) mod_dav_fs: Improve logging output when failing to open files for
writing. PR 64413. [Bingyu Shen <ahshenbingyu gmail.com>]
*) mod_http2: Fixed a race condition that could lead to streams being
aborted (RST to the client), although a response had been produced.
[Stefan Eissing]
*) mod_lua: Add support to Lua 5.4 [Joe Orton, Giovanni Bechis, Ruediger Pluem]
*) MPM event/worker: Fix possible crash in child process on early signal
delivery. PR 64533. [Ruediger Pluem]
*) mod_http2: sync with github standalone version 1.15.17
- Log requests and sent the configured error response in case of early detected
errors like too many or too long headers. [Ruediger Pluem]
- new option 'H2OutputBuffering on/off' which controls the buffering of stream output.
The default is on, which is the behaviour of older mod-h2 versions. When off, all
bytes are made available immediately to the main connection for sending them
out to the client. This fixes interop issues with certain flavours of gRPC, see
also <icing/mod_h2#207>.
[Stefan Eissing]
*) mod_unique_id: Fix potential duplicated ID generation under heavy load.
PR 65159
[Jonas Müntener <jonas.muentener ergon.ch>, Christophe Jaillet]
*) "[mod_dav_fs etag handling] should really honor the FileETag setting".
- It now does.
- Add "Digest" to FileETag directive, allowing a strong ETag to be
generated using a file digest.
- Add ap_make_etag_ex() and ap_set_etag_fd() to allow full control over
ETag generation.
- Add concept of "binary notes" to request_rec, allowing packed bit flags
to be added to a request.
- First binary note - AP_REQUEST_STRONG_ETAG - allows modules to force
the ETag to a strong ETag to comply with RFC requirements, such as those
mandated by various WebDAV extensions.
[Graham Leggett]
*) mod_proxy_http: Fix a possibly crash when the origin connection gets
interrupted before completion. PR 64234.
[Barnim Dzwillo <dzwillo strato.de>, Ruediger Pluem]
*) mod_ssl: Do not keep connections to OCSP responders alive when doing
OCSP requests. PR 64135. [Ruediger Pluem]
*) mod_ssl: Improve the coalescing filter to buffer into larger TLS
records, and avoid revealing the HTTP header size via TLS record
boundaries (for common response generators).
[Joe Orton, Ruediger Pluem]
*) mod_proxy_hcheck: Don't pile up health checks if the previous one did
not finish before hcinterval. PR 63010. [Yann Ylavic]
*) mod_session: Improve session parsing. [Yann Yalvic]
*) mod_authnz_ldap: Prevent authentications with empty passwords for the
initial bind to fail with status 500. [Ruediger Pluem]
*) mod_auth_digest: Fast validation of the nonce's base64 to fail early if
the format can't match anyway. [Yann Ylavic]
*) mod_proxy_fcgi: Honor "SetEnv proxy-sendcl" to forward a chunked
Transfer-Encoding from the client, spooling the request body when needed
to provide a Content-Length to the backend. PR 57087. [Yann Ylavic]
*) mod_proxy: Put mod_proxy_{connect,wstunnel} tunneling code in common in
proxy_util. [Yann Ylavic]
*) mod_proxy: Improve tunneling loop to support half closed connections and
pending data draining (for protocols like rsync). PR 61616. [Yann Ylavic]
*) mod_proxy_http: handle Upgrade request, 101 (Switching Protocol) response
and switched protocol forwarding. [Yann Ylavic]
*) mod_proxy_wstunnel: Leave Upgrade requests handling to mod_proxy_http,
allowing for (non-)Upgrade negotiation with the origin server.
[Yann Ylavic]
*) mod_proxy: Allow ProxyErrorOverride to be restricted to specific status
codes. PR63628. [Martin Drößler <mail martindroessler.de>]
*) core: Add ReadBufferSize, FlushMaxThreshold and FlushMaxPipelined
directives. [Yann Ylavic]
*) core: Ensure that aborted connections are logged as such. PR 62823
[Arnaud Grandville <contact@grandville.net>]
*) http: Allow unknown response status' lines returned in the form of
"HTTP/x.x xxx Status xxx". [Yann Ylavic]
*) mod_proxy_http: Fix 100-continue deadlock for spooled request bodies,
leading to Request Timeout (408). PR 63855. [Yann Ylavic]
*) core: Remove headers on 304 Not Modified as specified by RFC7234, as
opposed to passing an explicit subset of headers. PR 61820.
[Giovanni Bechis]
*) mpm_event: Don't reset connections after lingering close, restoring prior
to 2.4.28 behaviour. [Yann Ylavic]
*) mpm_event: Kill connections in keepalive state only when there is no more
workers available, not when the maximum number of connections is reached,
restoring prior to 2.4.30 behaviour. [Yann Ylavic]
*) mod_unique_id: Use base64url encoding for UNIQUE_ID variable,
avoiding the use of '@'. PR 57044.
[Michael Kaufmann <apache-bugzilla michael-kaufmann.ch>]
*) mod_rewrite: Extend the [CO] (cookie) flag of RewriteRule to accept a
SameSite attribute. [Eric Covener]
*) mod_proxy: Add proxy check_trans hook. This allows proxy
modules to decline request handling at early stage.
*) mod_proxy_wstunnel: Decline requests without an Upgrade
header so ws/wss can be enabled overlapping with later
http/https.
*) mod_http2: Log requests and sent the configured error response in case of
early detected errors like too many or too long headers.
[Ruediger Pluem, Stefan Eissing]
*) mod_md: Lowered the required minimal libcurl version from 7.50 to 7.29
as proposed by <alexander.gerasimov codeit.pro>. [Stefan Eissing]
*) mod_ssl: Fix request body buffering with PHA in TLSv1.3. [Joe Orton]
*) mod_proxy_uwsgi: Fix a crash when sending environment variables with no
value. PR 64598 [Ruediger Pluem]
*) mod_proxy: Recognize parameters from ProxyPassMatch workers with dollar
substitution, such that they apply to the backend connection. Note that
connection reuse is disabled by default to avoid compatibility issues.
[Takashi Sato, Jan Kaluza, Eric Covener, Yann Ylavic, Jean-Frederic Clere]
jperkin
pushed a commit
that referenced
this issue
Jun 15, 2021
httpuv 1.6.1 ============ * The `timegm()` function is a non-standard GNU extension, so it has been replaced with an internal `timegm2()` function. (#300) httpuv 1.6.0 ============ * Remove BH dependency. httpuv now requires a compiler which supports C++11. (#297) httpuv 1.5.5 ============ * Fix SHA1 calculation, and thus WebSocket server handshakes, on big-endian systems. (#284) * Fixed #195: Responses required `headers` to be a named list. Now it can also be `NULL`, an empty unnamed list, or it can be unset. (#289) * Allow responses to omit `body` (or set it as `NULL`) to avoid sending a body or setting the `Content-Length` header. This is intended for use with HTTP 204/304 responses. (#288) httpuv 1.5.4 ============ * Fixed #275: Large HTTP request headers could get truncated if they spanned more than one TCP message. (#277) * Fixed build for Solaris. (#271) * Fixed a test that had incorrect logic. (#272) httpuv 1.5.3.1 ============== * Updated libuv to version 1.37.0. (#266) * Fixed #204: On UBSAN builds of R, there were warnings about unaligned memory access. (#246) * Avoid creating a new Rook error stream object for each request. This should improve performance. (#245) * Resolved #247: httpuv no longer returns a HTTP 400 code for static files when the "Content-Length" header is 0. This Content-Length header is inserted by some proxies even for messages without payloads. (#248) * Resolved #253: Setting the FRAMEWORK environment variable would break compilation. This change removes any dependency on that variable. (#254) httpuv 1.5.2 ============ * In the static file-serving code path, httpuv previously looked for a `Connection: upgrade` header; if it found this header, it would not try to serve a static file, and it would instead forward the HTTP request to the R code path. However, some proxies are configured to always set this header, even when the connection is not actually meant to be upgraded. Now, instead of looking for a `Connection: upgrade` header, httpuv looks for the presence of an `Upgrade` header (with any value), and should be more robust to incorrectly-configured proxies. (#215) * Fixed handling of messages without payloads: (#219) * Fixed #224: Static file serving on Windows did not work correctly if it was from a path that contained non-ASCII characters. (#227) * Resolved #194, #233: Added a `quiet` option to `startServer`, which suppresses startup error messages that are normally printed to console (and can't be intercepted with `capture.output()`). (#234) * Added a new function `randomPort()`, which returns a random available port for listening on. (#234) * Added a new (unexported) function `logLevel()`, for controlling debugging information that will be printed to the console. Previously, httpuv occasionally printed messages like `ERROR: [uv_write] broken pipe` and `ERROR: [uv_write] bad file descriptor` by default. This happened when the server tried to write to a pipe that was already closed, but the situation was not harmful, and was already being handled correctly. Now these messages are printed only if the log level is set to `INFO` or `DEBUG`. (#223) * If an application's `$call()` method is missing, it will now give a 404 response instead of a 500 response. (#237) * Disallowed backslash in static path, to prevent path traversal attacks. (#235) * Static file serving on Windows could fail if multiple requests accessed the same file simultaneously. (#239)
jperkin
pushed a commit
that referenced
this issue
Jun 15, 2021
# version 0.7-1 * allow longer units grouping; #270 addressing #269 @bart1 * fix regression in `set_units` method for `mixed_units` to ensure that ordering is preserved; #272 addressing #271 # version 0.7-0 * add `load_units_xml` to enable database reloading as well as loading user-provided unit systems; #254 addressing #243, #244 * add `install_unit` and `remove_unit` for adding/removing custom user-defined symbols or names, with optional mapping to existing units; `install_symbolic_unit`, `remove_symbolic_unit`, `install_conversion_constant`, `install_conversion_offset` are deprecated; #261 addressing #89 * add `keep_units`, a helper to apply functions that do not preserve units; #255 addressing #252 * fix `as_units("")`, which is now equivalent to `unitless`; #199 * fix plot axes for `plot.formula` and `plot.data.frame`; #213 * fix arithmetic for powers above 1 and below -1; #264 * improve arithmetic of logarithms; #249 * export `ud_are_convertible`; #263 addressing #258 @cregouby * remove deprecations: `as.units`, `as_cf`, `make_unit`, `parse_unit`; #259 * remove deprecated pre-computed `ud_units` database; #259 # version 0.6-7 * port `isFALSE` to fix regression in old R versions; #230 addressing #229 * fix replacement operation for `units` objects; #233 addressing #232 * fix compatibility with dplyr 1.0; #247 addressing #239 # version 0.6-6 * prettier `str` print for units and mixed units; #228 addressing #227 * add compatibility with upcoming tibble v3.0.0; #225
jperkin
pushed a commit
that referenced
this issue
Jun 15, 2021
# pillar 1.6.1 - Bump required versions of ellipsis and vctrs to avoid warning during package load. - `obj_sum()` no longer includes shape twice (#315). # pillar 1.6.0 ## Features - New `num()` and `char()` offer a flexible way to customize the display of numeric and character columns (#191, #84). - New `"pillar.max_dec_width"` option (#308). - New `format_type_sum.AsIs()` avoids the need to implement your own `format_type_sum()` method (#286). - `align()` gains `space` argument to control the character used for filling (#285). - Numbers in scientific and decimal notation are formatted with the same rules regarding significant or decimal digits (#297). ## Bug fixes - Load the debugme package only if the `DEBUGME` environment variable is set. - More accurate detection if the decimal dot is necessary, and how many digits to show after the decimal dot (#298). - Use display width instead of number of characters when truncating character columns. ## Documentation - New `vignette("numbers")` and `vignette("digits")` (#308). ## Internal - Compatibility with vctrs 0.3.7 (#291). - `format.pillar_shaft_simple()` requires `"na"` attribute and no longer defaults to `pillar_na()` (#273). # pillar 1.5.1 ## Features - New `format_glimpse()` (#177). ## Bug fixes - Color and formatting can now be reliably turned off by setting the `"cli.num_colors"` option to 1 (#269). ## Documentation - Add examples for new functions (#264). - Fix lifecycle badges everywhere. # pillar 1.5.0 ## Breaking changes - `obj_sum()` now always returns a string. `pillar_shaft.list()` iterates over its elements and calls `obj_sum()` for each (#137). - Breaking: `print.pillar()` and `print.pillar_ornament()` now show `<pillar>` `<pillar_ornament>` in the first line (#227, #228). - pillar has been re-licensed as MIT (#215). ## Extensibility - New `size_sum()` generic (#239). - New `ctl_new_pillar()` and `ctl_new_compound_pillar()` used via `print.tbl()`, `format.tbl()` and `tbl_format_setup.tbl()` (#230). - New `new_pillar()` low-level constructor (#230). - New `new_pillar_component()` and `pillar_component()` (#230). - New articles `vignette("extending")` and `vignette("printing")` (#251). ## Formatting - All printing code has been moved from tibble to pillar (#179), including `glimpse()` (#234). This concentrates the printing code in one package and allows for better extensibility. - Improve formatting for `"Surv"` and `"Surv2"` classes from the survival package (#199). - Vectors of the `vctrs_unspecified()` class are formatted better (#256). - Arrays are now formatted by showing only their first slice (#142). - Avoid wrapping extra column names with spaces (#254). ## Internal - Now using debugme to simplify understand the complex control flow, see `vignette("debugme")` (#248). - New `format.pillar_ornament()` (#228). - Using testthat 3e (#218). - Avoid pillar.bold option in most tests (#216). - Change internal storage format for `colonnade()` and `extra_cols()` (#204). # pillar 1.4.7 - Adapt to changed environment on CRAN's Solaris machine. # pillar 1.4.6 - Restore compatibility with R 3.2. # pillar 1.4.5 ## Features - New `pillar.min_chars` option allows controlling the minimum number of characters shown for a character column (#178, @statsmaths). - `bit64::integer64()` columns are now formatted the same way as numeric columns (#175). - New `align()` to support easy alignment of strings within a character vector (existing function exported by @davidchall, #185). ## Technical - `pillar_shaft()`, `format_type_sum()` and `extra_cols()` issue a warning if dots are unused. - `new_pillar_title()` and `new_pillar_type()` warn if `...` is not empty. ## Internal - Use lifecycle package. - Remove compatibility code for R < 3.3. # pillar 1.4.4 - `obj_sum()` uses `vctrs::vec_size()` internally. - `is_vector_s3.default()` is soft-deprecated and no longer used. Please ensure that `vctrs::vec_is()` is `TRUE` for your class. - Rely on vctrs for type abbreviations. # pillar 1.4.3 - `new_pillar_shaft_simple()` gains `na` argument to control appearance of `NA` values. - String columns are quoted if at least one value needs quotes (#171). - Apply subtle style to `list_of` columns (#172). - Fix formatting if mantissa is very close to 1 (#174). - Use `as.character()` instead of `as_character()`. - Remove compatibility with testthat < 2.0.0.
jperkin
pushed a commit
that referenced
this issue
Aug 3, 2021
0.8.2 Changes - Improved yank and undo alloc'ing. Malloc as much we need from start in a long batch and avoid small mallocs. - Changed the way lua scripts are referenced in formulas. Now they are input as any other string formula, like this: \"@lua("script_name.lua", 1) being 1 if the reference should be added to the depgraph or not, making it evaluated just once or every time the depgraph is evaluated. NOTE that if set to 0 and the cell is referenced by another cell, it will be executed nonetheless. - Added new exec_lua configuration variable. - Rows now can have height higher than one LINE. See fj and fk in normal mode or :formatrow in command mode. - Wrap cell content. new autowrap config value. works when nooverlap and notruncate are set. - Open URL or file specified on cell (PR 401) - Import mkd files - Multiple frozen rows/columns (fr / fc in normal mode) - Added mapping_timeout configuration variable with a default value of 1500ms (used to be a fixed value of 800ms). - Added mouse support in insert and command mode. The selection of a cell gets copied to inputbar. - Added command_timeout configuration variable. - handle hidden rows/cols in undo/redo of ir/ic/dr/dc - Added backwards search with '?' - Restore \\* from old SC. \\{char} fills the cell with n occurrences of {char} to complete its width - Store frozen rows and cols when saving file - Added :formatcol command (handling its undo as well) - Added :formatrow command (handling its undo as well) - Added undo of freeze row and col - Handle \n in cell input, and with autowrap - Handle undoing changes in row height produced by string input - Changed input bar from window to pad: permits entering string longer than COLS. - @count counts cells with strings as well, and not just with numbers. - Handle entering a label after :datefmt for datetime value edition. - New dracula / papercolor themes. - Added EvalRange() so that the graph is not evaluated entirely all the time. - Replaced 'EvalAll' with 'EvalRange'. - Removed unneeded parameters on EvalJustVertex" - Added eval_order in EvalRange and rebuild_graph. - Added @evaluate / @sevaluate functions - Handle @nval dependencies. - Handle @mycol/@myrow calls during startup when no EvalJustOneVertex is yet called - Added @getent (FR issue #451) - The saving format for :w command would be according to current file format. #493 - modified savefile() of file.c to check current file format before saving a file. - Keep consistent with other format such as csv and save the file with the same format as current file. - Added HELP_HIGHLIGHT definition color for help page. - Renamed GRID_PAIR to GRID_EVEN in color.c. - UNDO of :fsum is handled by let. - calc_offscr_rows/cols rewriten and renamed to calc_mobile_rows/cols Fixes - Fix old sc bug - issue #371 - Fix when saving sc files of cells that has some string expressions - issue #541 - Fix leak in nval. - Fix Issue #372. - Free lua memory at exit. - Fix when saving marks in file after importing xlsx file and saving it in sc format. - EXPR and NUMBER colors were overloaded by STRING color #546 - Fix markdown export when empty col was added left to data - Fix in :showrows command. - :fsum added to command mode commands. It was missing. - Added :showcols command that was missing. - Handled issue #429 - handled issue #374 - Ignore SIGWINCH outside ncurses. - triggers: Avoid segfault when not being able to load module. Issue #325 0.8.1 New features - Braille support - Added latex export - issue #394 - Added mappings for command mode - Work on issues #225 and #247: support mapping of ñ and other special chars - Basic ODS file import - Paste to a range of selected cells - (actually added on v0.8 - issue 438 - PR 445) - Added txtdelim | for csv files import - issue 409 - Added macros to --version (show version) - Support higher versions of lua. - Handle ESC key in mappings. related to issue #492. - Added freeze to visual mode - issue #459 Changes - Recognise SPACE in mappings rather than simple ' ' - Visual change: Moved cmd multiplier to the left of mode - Changed default headings colors - many improvements to the config facility and usage - PR 519 - improved sort for 65k rows Fixes - Fix issues on CIRCULAR REFERENCES: #473 #201 #475 #321. these were as hard. - Fix issue 417 and added a date type in xlsx import. - Fix Engformat overlap text y número. Mostraba * (actually fixed on v0.8) - Fix column header display - overflow with column width 2 and column with two letters - PR 517 - Fix isnumeric test to recognise floats: affects copy/paste - PR 450 - Fix issue setting conf variables like nonumeric - Fix when showing empty text - 944844505d7cdb7d3d392a5c1d2b3ffde40a1fff - Fix issue #227 - this was hard. used to segfault and keep wrong reference after deleting row that is last in range of expr. ex. @AvG(B1:B4) and deleting row 4 - Fix issue #433: large memory use with multiple linked cells. - Fix issue #287 - valueize didnt update depgraph - Solved issue #399. 'g' command of NORMAL_MODE changed to 'gt'" - Fixed vmaps in get_mappings function. - Fixed bug on 'error' in gram.y - comment on issue #482 - Fix issue #457: cursor position could add empty rows or columns when exporting csv files - Fix issue #288: ^ misbehaving when having fixed rows - Fix in mouse clicks - Fix possible memory leak in add freeze - XLSX: Free memory leak when looking for specified sheet. - XLSX: Avoid segfault when using shared formulas. issue #218.
jperkin
pushed a commit
that referenced
this issue
Nov 28, 2021
Changes with Apache 2.4.48
*) mod_proxy_wstunnel: Add ProxyWebsocketFallbackToProxyHttp to opt-out the
fallback to mod_proxy_http for WebSocket upgrade and tunneling.
[Yann Ylavic]
*) mod_proxy: Fix flushing of THRESHOLD_MIN_WRITE data while tunneling.
BZ 65294. [Yann Ylavic]
*) core: Fix a regression that stripped the ETag header from 304 responses.
PR 61820 [Ruediger Pluem, Roy T. Fielding]
*) core: Adding SSL related inquiry functions to the server API.
These function are always available, even when no module providing
SSL is loaded. They provide their own "shadowing" implementation for
the optional functions of similar name that mod_ssl and impersonators
of mod_ssl provide.
This enables loading of several SSL providing modules when all but
one of them registers itself into the new hooks. Two old-style SSL
modules will not work, as they replace the others optional functions
with their own.
Modules using the old-style optional functions will continue to work
as core supplies its own versions of those.
The following has been added so far:
- ap_ssl_conn_is_ssl() to query if a connection is using SSL.
- ap_ssl_var_lookup() to query SSL related variables for a
server/connection/request.
- Hooks for 'ssl_conn_is_ssl' and 'ssl_var_lookup' where modules
providing SSL can install their own value supplying functions.
- ap_ssl_add_cert_files() to enable other modules like mod_md to provide
certificate and keys for an SSL module like mod_ssl.
- ap_ssl_add_fallback_cert_files() to enable other modules like mod_md to
provide a fallback certificate in case no 'proper' certificate is
available for an SSL module like mod_ssl.
- ap_ssl_answer_challenge() to enable other modules like mod_md to
provide a certificate as used in the RFC 8555 'tls-alpn-01' challenge
for the ACME protocol for an SSL module like mod_ssl. The function
and its hook provide PEM encoded data instead of file names.
- Hooks for 'ssl_add_cert_files', 'ssl_add_fallback_cert_files' and
'ssl_answer_challenge' where modules like mod_md can provide providers
to the above mentioned functions.
- These functions reside in the new 'http_ssl.h' header file.
[Stefan Eissing]
*) core/mod_ssl/mod_md: adding OCSP response provisioning as core feature. This
allows modules to access and provide OCSP response data without being tied
of each other. The data is exchanged in standard, portable formats (PEM encoded
certificates and DER encoded responses), so that the actual SSL/crypto
implementations used by the modules are independant of each other.
Registration and retrieval happen in the context of a server (server_rec)
which modules may use to decide if they are configured for this or not.
The area of changes:
1. core: defines 2 functions in include/http_ssl.h, so that modules may
register a certificate, together with its issuer certificate for OCSP
response provisioning and ask for current response data (DER bytes) later.
Also, 2 hooks are defined that allow modules to implement this OCSP
provisioning.
2. mod_ssl uses the new functions, in addition to what it did already, to
register its certificates this way. If no one is interested in providing
OCSP, it falls back to its own (if configured) stapling implementation.
3. mod_md registers itself at the core hooks for OCSP provisioning. Depending
on configuration, it will accept registrations of its own certificates only,
all certificates or none.
[Stefan Eissing]
*) mod_md: v2.4.0 with improvements and bugfixes
- MDPrivateKeys allows the specification of several types. Beside "RSA" plus
optional key lengths elliptic curves can be configured. This means you can
have multiple certificates for a Managed Domain with different key types.
With ```MDPrivateKeys secp384r1 rsa2048``` you get one ECDSA and one RSA
certificate and all modern client will use the shorter ECDSA, while older
client will get the RSA certificate.
Many thanks to @tlhackque who pushed and helped on this.
- Support added for MDomains consisting of a wildcard. Configuring
```MDomain *.host.net``` will match all virtual hosts matching that pattern
and obtain one certificate for it (assuming you have 'dns-01' challenge
support configured). Addresses #239.
- Removed support for ACMEv1 servers. The only known installation used to
be Let's Encrypt which has disabled that version more than a year ago for
new accounts.
- Andreas Ulm (<https://github.com/root360-AndreasUlm>) implemented the
```renewing``` call to ```MDMessageCmd``` that can deny a certificate
renewal attempt. This is useful in clustered installations, as
discussed in #233).
- New event ```challenge-setup:<type>:<domain>```, triggered when the
challenge data for a domain has been created. This is invoked before the
ACME server is told to check for it. The type is one of the ACME challenge
types. This is invoked for every DNS name in a MDomain.
- The max delay for retries has been raised to daily (this is like all
retries jittered somewhat to avoid repeats at fixed time of day).
- Certain error codes reported by the ACME server that indicate a problem
with the configured data now immediately switch to daily retries. For
example: if the ACME server rejects a contact email or a domain name,
frequent retries will most likely not solve the problem. But daily retries
still make sense as there might be an error at the server and un-supervised
certificate renewal is the goal. Refs #222.
- Test case and work around for domain names > 64 octets. Fixes #227.
When the first DNS name of an MD is longer than 63 octets, the certificate
request will not contain a CN field, but leave it up to the CA to choose one.
Currently, Lets Encrypt looks for a shorter name in the SAN list given and
fails the request if none is found. But it is really up to the CA (and what
browsers/libs accept here) and may change over the years. That is why
the decision is best made at the CA.
- Retry delays now have a random +/-[0-50]% modification applied to let
retries from several servers spread out more, should they have been
restarted at the same time of day.
- Fixed several places where the 'badNonce' return code from an ACME server
was not handled correctly. The test server 'pebble' simulates this behaviour
by default and helps nicely in verifying this behaviour. Thanks, pebble!
- Set the default `MDActivationDelay` to 0. This was confusing to users that
new certificates were deemed not usably before a day of delay. When clocks are
correct, using a new certificate right away should not pose a problem.
- When handling ACME authorization resources, the module no longer requires
the server to return a "Location" header, as was necessary in ACMEv1.
Fixes #216.
- Fixed a theoretical uninitialized read when testing for JSON error responses
from the ACME CA. Reported at <https://bz.apache.org/bugzilla/show_bug.cgi?id=64297>.
- ACME problem reports from CAs that include parameters in the Content-Type
header are handled correctly. (Previously, the problem text would not be
reported and retries could exceed CA limits.)
- Account Update transactions to V2 CAs now use the correct POST-AS-GET method.
Previously, an empty JSON object was sent - which apparently LE accepted,
but others reject.
[Stefan Eissing, @tlhackque, Andreas Ulm]
Changes with Apache 2.4.47
*) mod_dav_fs: Improve logging output when failing to open files for
writing. PR 64413. [Bingyu Shen <ahshenbingyu gmail.com>]
*) mod_http2: Fixed a race condition that could lead to streams being
aborted (RST to the client), although a response had been produced.
[Stefan Eissing]
*) mod_lua: Add support to Lua 5.4 [Joe Orton, Giovanni Bechis, Ruediger Pluem]
*) MPM event/worker: Fix possible crash in child process on early signal
delivery. PR 64533. [Ruediger Pluem]
*) mod_http2: sync with github standalone version 1.15.17
- Log requests and sent the configured error response in case of early detected
errors like too many or too long headers. [Ruediger Pluem]
- new option 'H2OutputBuffering on/off' which controls the buffering of stream output.
The default is on, which is the behaviour of older mod-h2 versions. When off, all
bytes are made available immediately to the main connection for sending them
out to the client. This fixes interop issues with certain flavours of gRPC, see
also <icing/mod_h2#207>.
[Stefan Eissing]
*) mod_unique_id: Fix potential duplicated ID generation under heavy load.
PR 65159
[Jonas Müntener <jonas.muentener ergon.ch>, Christophe Jaillet]
*) "[mod_dav_fs etag handling] should really honor the FileETag setting".
- It now does.
- Add "Digest" to FileETag directive, allowing a strong ETag to be
generated using a file digest.
- Add ap_make_etag_ex() and ap_set_etag_fd() to allow full control over
ETag generation.
- Add concept of "binary notes" to request_rec, allowing packed bit flags
to be added to a request.
- First binary note - AP_REQUEST_STRONG_ETAG - allows modules to force
the ETag to a strong ETag to comply with RFC requirements, such as those
mandated by various WebDAV extensions.
[Graham Leggett]
*) mod_proxy_http: Fix a possibly crash when the origin connection gets
interrupted before completion. PR 64234.
[Barnim Dzwillo <dzwillo strato.de>, Ruediger Pluem]
*) mod_ssl: Do not keep connections to OCSP responders alive when doing
OCSP requests. PR 64135. [Ruediger Pluem]
*) mod_ssl: Improve the coalescing filter to buffer into larger TLS
records, and avoid revealing the HTTP header size via TLS record
boundaries (for common response generators).
[Joe Orton, Ruediger Pluem]
*) mod_proxy_hcheck: Don't pile up health checks if the previous one did
not finish before hcinterval. PR 63010. [Yann Ylavic]
*) mod_session: Improve session parsing. [Yann Yalvic]
*) mod_authnz_ldap: Prevent authentications with empty passwords for the
initial bind to fail with status 500. [Ruediger Pluem]
*) mod_auth_digest: Fast validation of the nonce's base64 to fail early if
the format can't match anyway. [Yann Ylavic]
*) mod_proxy_fcgi: Honor "SetEnv proxy-sendcl" to forward a chunked
Transfer-Encoding from the client, spooling the request body when needed
to provide a Content-Length to the backend. PR 57087. [Yann Ylavic]
*) mod_proxy: Put mod_proxy_{connect,wstunnel} tunneling code in common in
proxy_util. [Yann Ylavic]
*) mod_proxy: Improve tunneling loop to support half closed connections and
pending data draining (for protocols like rsync). PR 61616. [Yann Ylavic]
*) mod_proxy_http: handle Upgrade request, 101 (Switching Protocol) response
and switched protocol forwarding. [Yann Ylavic]
*) mod_proxy_wstunnel: Leave Upgrade requests handling to mod_proxy_http,
allowing for (non-)Upgrade negotiation with the origin server.
[Yann Ylavic]
*) mod_proxy: Allow ProxyErrorOverride to be restricted to specific status
codes. PR63628. [Martin Drößler <mail martindroessler.de>]
*) core: Add ReadBufferSize, FlushMaxThreshold and FlushMaxPipelined
directives. [Yann Ylavic]
*) core: Ensure that aborted connections are logged as such. PR 62823
[Arnaud Grandville <contact@grandville.net>]
*) http: Allow unknown response status' lines returned in the form of
"HTTP/x.x xxx Status xxx". [Yann Ylavic]
*) mod_proxy_http: Fix 100-continue deadlock for spooled request bodies,
leading to Request Timeout (408). PR 63855. [Yann Ylavic]
*) core: Remove headers on 304 Not Modified as specified by RFC7234, as
opposed to passing an explicit subset of headers. PR 61820.
[Giovanni Bechis]
*) mpm_event: Don't reset connections after lingering close, restoring prior
to 2.4.28 behaviour. [Yann Ylavic]
*) mpm_event: Kill connections in keepalive state only when there is no more
workers available, not when the maximum number of connections is reached,
restoring prior to 2.4.30 behaviour. [Yann Ylavic]
*) mod_unique_id: Use base64url encoding for UNIQUE_ID variable,
avoiding the use of '@'. PR 57044.
[Michael Kaufmann <apache-bugzilla michael-kaufmann.ch>]
*) mod_rewrite: Extend the [CO] (cookie) flag of RewriteRule to accept a
SameSite attribute. [Eric Covener]
*) mod_proxy: Add proxy check_trans hook. This allows proxy
modules to decline request handling at early stage.
*) mod_proxy_wstunnel: Decline requests without an Upgrade
header so ws/wss can be enabled overlapping with later
http/https.
*) mod_http2: Log requests and sent the configured error response in case of
early detected errors like too many or too long headers.
[Ruediger Pluem, Stefan Eissing]
*) mod_md: Lowered the required minimal libcurl version from 7.50 to 7.29
as proposed by <alexander.gerasimov codeit.pro>. [Stefan Eissing]
*) mod_ssl: Fix request body buffering with PHA in TLSv1.3. [Joe Orton]
*) mod_proxy_uwsgi: Fix a crash when sending environment variables with no
value. PR 64598 [Ruediger Pluem]
*) mod_proxy: Recognize parameters from ProxyPassMatch workers with dollar
substitution, such that they apply to the backend connection. Note that
connection reuse is disabled by default to avoid compatibility issues.
[Takashi Sato, Jan Kaluza, Eric Covener, Yann Ylavic, Jean-Frederic Clere]
jperkin
pushed a commit
that referenced
this issue
Apr 19, 2022
# glue 1.6.2 * Modify a test for better forward compatibility with R. # glue 1.6.1 * Glue Now registers its custom knitr engines in a way that is more robust to namespace-loading edge cases that can arise during package installation (#254). # glue 1.6.0 * `glue()`, `glue_data()`, `glue_col()`, and `glue_data_col()` gain a new `.literal` argument, which controls how quotes and the comment character are treated when parsing the expression string (#235). This is mostly useful when using a custom transformer. * Trailing whitespace-only lines don't interfere with indentation (#247). # glue 1.5.1 * Jennifer Bryan is now the maintainer. * The existing custom language engines for knitr, `glue` and `glue_sql`, are documented in a new vignette (#71). *Detail added after release: glue now sets up registration of these engines in `.onLoad()`.* * `glue_col()` gives special treatment to styling functions from the crayon package, e.g. `glue_col("{blue foo}")` "just works" now, even if crayon is not attached (but is installed) (#241). * Unterminated backticks trigger the same error as unterminated single or double quotes (#237). * `glue_sql()` collapses zero-length `DBI::SQL` object into `DBI::SQL("NULL")` (#244 @shrektan). # glue 1.5.0 ## Breaking changes * Long deprecated function `collapse()` has been removed (#213) ## New functions and arguments * New `glue_sql_collapse()` function to collapse inputs and return a `DBI::SQL()` object (#103). * `glue()` gains a new `.comment` argument, to control the comment character (#193). * `glue()` gains a new `.null` argument, to control the value to replace `NULL` values with (#217, @echasnovski). ## Bugfixes and minor changes * `sql_quote_transformer()` is now allows whitespace after the trailing `*` (#218). * `compare_proxy.glue()` method defined so glue objects can be compared to strings in testthat 3e without errors (#212) * `print.glue()` no longer prints an empty newline for 0 length inputs (#214) * Unterminated comments in glue expression now throw an error (#227, @gaborcsardi) * Unterminated quotes in glue expressions now throw an error (#226, @gaborcsardi)
jperkin
pushed a commit
that referenced
this issue
May 13, 2022
fping 5.1 (2022-02-06) ====================== ## Bugfixes and other changes - Use setcap to specify specific files in fping.spec (#232, thanks @zdyxry) - Netdata: use host instead name as family label (#226, thanks @k0ste) - Netdata: use formatstring macro PRId64 (#229, thanks @gsnw) - Allow -4 option to be given multiple times (#215, thanks @normanr) - Documentation fix (#208, thanks @timgates42) - Retain privileges until after privileged setsockopt (#200, thanks @simetnicbr) - Set bind to source only when option is set (#198, thanks @dinoex) - Update Azure test pipeline (#197, thanks @gsnw) - Fix getnameinfo not called properly for IPv4 (#227, thanks @aafbsd) - Fixed wrong timestamp under Free- and OpenBSD and macOS (#217, thanks @gsnw) - Documentation updates (#240, thanks @auerswal) - Updated autotools (autoconf 2.71, automake 1.16.5, libtool 2.4.6) fping 5.0 (2020-08-05) ====================== ## Incompatible Changes - In non-quiet loop and count mode, a line is printed for every lost packet (#175, thanks @kbucheli): ``` $ fping -D -c2 8.8.8.8 8.8.8.7 [1596092373.18423] 8.8.8.8 : [0], 64 bytes, 12.8 ms (12.8 avg, 0% loss) [1596092374.18223] 8.8.8.7 : [0], timed out (NaN avg, 100% loss) [1596092374.18424] 8.8.8.8 : [1], 64 bytes, 12.3 ms (12.5 avg, 0% loss) [1596092375.18344] 8.8.8.7 : [1], timed out (NaN avg, 100% loss) 8.8.8.8 : xmt/rcv/%loss = 2/2/0%, min/avg/max = 12.3/12.5/12.8 8.8.8.7 : xmt/rcv/%loss = 2/0/100% ``` - The returned size in bytes now always excludes the IP header, so if before it reported '84 bytes' e.g. when using 'fping -l', now it reports '64 bytes'. This is to make the reported size consistent with ping(8) from iputils and also with fping when pinging a IPv6 host (which never included the IPv6 header size). ## New features - The number of sent pings is only counted when the pings are received or have timed out, ensuring that the loss ratio will be always correct. This makes it possible, for example, to use loop mode (-l) with interval statistics (-Q) and a timeout larger than period, without having the issue that initially some pings would be reported as missing (#193) - Improved precision of measurements from 10us to 1us (#136, thanks @tycho) ## Bugfixes and other changes - The reported size of received packets is now always correct on Linux even for packets > 4096 bytes (#180) - Travis CI automated testing now also macos testing and additional ubuntu distributions (#196)
jperkin
pushed a commit
that referenced
this issue
Aug 30, 2022
## [0.11.4] - 2022-08-12 ### Fixed - Fix a memory leak caused by `lru_cache` on methods. ([#227](python-poetry/tomlkit#227))
jperkin
pushed a commit
that referenced
this issue
Dec 3, 2022
1.53 2022-10-08 12:26:55-07:00 America/Los_Angeles * dist.ini - changed bugtracker.web to https://github.com/finance-quote/finance-quote/issues * DWS.pm - Set $info{$symbol, 'symbol'} to $symbol. * Union.pm - #231 - reworked for a different CSV file. * CurrencyRates/AlphaVantage.pm - API CURRENCY_EXCHANGE_RATE no longer accepts free API keys. Changed to use FX_DAILY API. Issue #229 PR #230 * Set minimum version for LWP::UserAgent in dist.ini to honor redirects. * CurrencyRates/AlphaVantage.pm - Added logic to account for empty JSON returned from currency exchange fetch. * Bourso.pm - Added Europe and France back as failover methods. These were removed some time ago in commit e26484b. * Tradeville.pm - Changed hostname in URL to tradeville.ro. Added logic to better account for the symbol not being found. * YahooJSON.pm - #202 - Account for symbols with '&'. * Minor change to isoTime function in Quote.pm. * Updated TSP.pm - PR #227 - update URL and handling of dates. 1.52 2022-07-03 15:15:38-07:00 America/Los_Angeles * Quote.pm - Fixed logic for FQ_LOAD_QUOTELET starting with "-defaults" reported in issue #197. PR #199. * AlphaVantage currency module: Don't recurse infinitely when exchange rate is less than .001 (PR 193) * Bourso.pm - Fixed data bug reported in issue #174 with PR #194. * TSP.pm - Minor fix for URL used to retrieve data. PR #195. Note: URL was changed after the PR was merged. Module remains in a non-working status. * TesouroDireto.pm - New module for Brazilian's National Treasury public bounds. PR #198. * Bloomberg.pm - Update Bloomberg class names #205. Correct html parsing errors. * MorningstarCH.pm - Re-enabled and fixed in #207. * ZA.pm - Change to return price from sharenet in major denomination. PR #208. * Changes to SourceForge project website HTML files. * Add [Prereqs] to dist.ini. #215 1.51 2021-07-04 14:41:59-07:00 America/Los_Angeles * Fix bugs in t/fq-object-methods.t * Add code to hide warning in t/currency_lookup.t 1.50 2021-06-26 20:52:16-07:00 America/Los_Angeles * New modules: CurrencyRates * Updated modules: ASX, TIAA-CREF, Fool, Currencies * Corrected some POD issues (thanks to the Debian Perl Group)
jperkin
pushed a commit
that referenced
this issue
Mar 17, 2023
- added support for Hare - fixed `--no-trailing-nl` option for LaTeX output (#216) - fixed typos in rnc.lang, spn.lang and znn.lang (#139) - fixed missing ngerman package for `--replace-quotes` option (#222) - fixed quotes highlighting in XML (#226) - updated file extension lists (#227) - updated astyle lib to version 3.2
jperkin
pushed a commit
that referenced
this issue
May 25, 2023
What's Changed
Guard PxManager test with pacrunner-duktape option by @janbrummer in #215
Fix build on NetBSD. by @0-wiz-0 in #220
Install libpxbackend into pkglibdir by @amigadave in #223
Move glib2 inclusion out of c++ protection. by @0-wiz-0 in #227
Replace libsoup with glib socket service functions by @janbrummer in #228
Enforce online state for tests by @janbrummer in #229
Use glib-object header instead of gio by @janbrummer in #230
Fix libproxy rpath by @janbrummer in #231
Draft: Improve ignore checks by @janbrummer in #232
Release 0.5.1 by @janbrummer in #233
jperkin
pushed a commit
that referenced
this issue
Jun 2, 2023
################################################################################ Changed in xts 0.13.1: o Ignore attribute order in `all.equal()`. Attribute order shouldn't matter. That can be checked with `identical()`. o Only call `tzone()` and `tclass()` once in `check.TZ()`. Calling these functions multiple times throws multiple warnings for xts objects created before the tclass and tzone were attached to the index instead of the xts object. (#306) o Add instructions to update old objects. Old xts objects do not have tclass and tzone attributes on the index. Add a function to update the object attributes and add a note to the warning to show how to use it. (#306) o Return 'POSIXct' if object has no 'tclass'. An empty string is not a valid 'tclass', so it can cause an error. o Add notes on `plot.xts()` nomenclature and structure. Also add ASCII art to illustrate definitions and layout. (#103) o Remove 'tis' support. The implementation was not even a bare minimum, and it's not clear it even worked correctly. (#398) o Register missing S3 methods and update signatures. With R-devel (83995-ish), `R CMD check` notes these S3 methods are not registered. It also notes that the signatures for `as.POSIXct.tis()` and `str.replot_xts()` do not match the respective generics. It also thinks `time.frequency()` is a S3 method because `time()` is a generic. The function isn't exported, so renaming won't break any external code. Thanks to Kurt Hornik for the report. (#398) o Format each column individually before printing. The top/bottom rows could have a different number of decimal places and there are often multiple variying spaces between columns. For example: close volume ma bsi 2022-01-03 09:31:00 476.470 803961.000 NA 54191.000 2022-01-03 09:32:00 476.700 179476.000 NA 53444.791 2022-01-03 09:33:00 476.540 197919.000 NA -16334.994 ... 2023-03-16 14:52:00 394.6000 46728.0000 392.8636 28319.4691 2023-03-16 14:53:00 394.6500 64648.0000 392.8755 15137.6857 2023-03-16 14:54:00 394.6500 69900.0000 392.8873 -1167.9368 There are 4 spaces between the index and the 'close' column, 2 between 'close' and 'volume', 4 between 'volume' and 'ma', and 2 between 'ma' and 'bsi'. There should be a consistent number of spaces between the columns. Most other classes of objects print with 1 space between the columns. The top rows have 3 decimals and the bottom rows have 4. These should also be the same. (#321) o Only convert printed index values to character. Converting the entire index to character is time-consuming for xts objects with many observations. It can take more than a second to print an xts object with 1mm observations. o Make column names based on number of columns. The original code was a lot more complicated because it tried to account for truncating the number of printed columns. That functionality was removed because of how complicated it was. So now we can simply create printed column names from the number of columns. (#395) o Fix `xts()` for zero-row data.frame. The `xts()` constructor would create an object with a list for coredata when 'x' is a data.frame with no rows. It needs to convert 'x' to a matrix and throw an error if 'x' is a list. (#394) o Reduce instances when `dplyr::lag()` warning is shown. The warning was shown whenever it detected dplyr is installed, even if the user wasn't actively using dplyr. That caused an excessive amount of noise when other packages attached xts (e.g. quantmod). Thanks to Duncan Murdoch for the report and suggested fix! (#393) o Keep colname when only one non-time-based column. The subset `x[, -which.col]` would return a vector when the data frame has a time-based column and only one additional column. Do not drop dimensions, so 'x' will still be a data.frame in this case. (#391) o Treat NA the same as NULL for start or end values. NULL represents an undefined index value. NA represents an unknown or missing index value. xts does not allow NA as index values. Subsetting an xts or zoo object by NA returns a zero-length object. So a NA (unknown) index value is essentially the same as an undefined index value. (#383, #345) o Warn and remove NA when `periodicity()` called on date-time with NA. Otherwise the uninformative error below will be thrown. (#289) Error in try.xts(x, error = "'x' needs to be timeBased or xtsible") : 'x' needs to be timeBased or xtsible o Account for TZ when making names for `split.xts()`. `as.yearmon.POSIXct()` always sets `tz = "GMT"` when calling `as.POSIXlt()`, regardless of the xts' index tzone. That can cause the `as.yearmon()` results to be different days for GMT and the index's timezone. Use `format.POSIXct()` for "months" because it checks for a 'tzone' attribute before converting to POSIXlt and calling `format.POSIXlt()`. The conversion to POSIXlt is important because it checks and uses the 'tzone' attribute before considering the 'tz' argument. So it effectively ignores the `tz = "GMT"` setting in `as.yearmon()`. This is also the reason for calling `as.POSIXlt()` before calling `as.yearqtr()`. (#392) ################################################################################ Changed in xts 0.13.0: ### New Features o Added a xts method for `na.fill()` to significantly increase performance when 'fill' is a scalar. (#259) o `as.xts()` will look for a time-based column in a data.frame if it cannot create an index from the row names. (#381) o Change `print()` xts method to only show the first and last 'show.rows' rows if number of rows is > 'max.rows'. (#321) o Made `str()` output more descriptive for xts objects. It now differentiates between xts objects that are empty, zero-width, or zero-length, and defines each type of object. It also adds column names to the output. (#168, #378) o Add startup warning that `dplyr::lag()` breaks method dispatch, which means calls to `lag(my_xts)` won't work any more. o Added open-ended time of day subsetting ranges. This allows users to subset by time of day from the start/end of the day without providing the start/end times (00:00:00.000/23:59:59.999). For example: x["/T1800"] # between the start of the day and 5pm x["T0500/"] # between 5am and the end of the day Thanks to Chris Katsulis for the suggestion! (#243) o Updated `to.period()` to accept custom 'endpoints' via the 'period' argument. Now you can aggregate on something other than the times that 'endpoints()' supports. Thanks to Ethan B. Smith for the suggestion! (#302) ### Fixes o Fixed typo and expand `period.apply()` documentation. (#205) The original description has: * "the data from INDEX[k] to INDEX[k+1]" But that's not consistent with the code. It should be: * "the data from INDEX[k]+1 to INDEX[k+1]" o Calls to `merge.xts()` on zero-width objects now match `merge.zoo()`. Previously, `merge.xts()` would return empty xts objects if called on two or more zero-width xts objects. `merge.zoo()` would return a zero-width object with the correct index. (#227, #379) o Fixed `Ops.xts()` so it always returned an object with the same class as the first (left-hand side) argument. It previously returned an xts object even if the first argument was a subclass of xts. (#49) ### Other o Migrated unit tests from RUnit to tinytest. Thanks Mark van der Loo! o Updated the `endpoints()` documentation to make it clearer that the result is based on the UNIX epoch (midnight 1970, UTC). Thanks to GitHub user Eluvias for the suggestion! (#299) o Fixed `reclass()` to ensure it always adds index attributes from the 'match.to' argument. It was not copying `tclass`, `tzone`, or `tformat` from 'match.to' to the result object. (#43) o Removed an unnecessary check in `na.locf()` (which is not user-facing). Thanks to GitHub user @cgiachalis for the suggestion! (#307) o Updated C entry points so they're not able to accidentally be found via dynamic lookup (i.e. `.Call("foo", ...)`). This makes each call to the C code a few microseconds faster, which is nice. (#260) o Made `merge.xts()` results consistent with `merge.zoo()` for zero-length xts objects with columns. The result of `merge.xts()` did not include the columns of any objects that had one or more columns, but zero rows. A join should include all the columns of the joined objects, regardless of the number of rows in the object. This is consistent with `merge.zoo()`. Thanks to Ethan B. Smith for the report and testing! (#222)
jperkin
pushed a commit
that referenced
this issue
Aug 8, 2023
What's Changed - fix typo in config example variable by @hyperpuncher in #209 - Add Void Linux as install option by @f1nbar in #210 - Implement timeout mechanism for getting authentication token by @aome510 in #212 - Fix a typo for homebrew install instructions by @toh995 in #216 - Add tracks_playback_limit config option by @aome510 in #219 - Use ttl cache instead of lru by @aome510 in #220 - Create app.toml with default values if it doesn't exist by @cobbinma in #221 - Tokyonight Theme 🎨 by @cobbinma in #225 - Improve queue popup by @m-torhan in #226 - fix: constant module name typo by @nuugen in #227 - Allow removing a keybind by @Kuba314 in #223 - move items in a playlist by @cobbinma in #224 - Improve TTL caching and handling by @aome510 in #230 - Playlist CLI Editing - New, Delete, Import, Fork, Update by @justjokiing in #222
jperkin
pushed a commit
that referenced
this issue
Nov 9, 2023
[1.0.0] - 2023-11-07 A quick note to any packages. The generated shell completions and man page are now in the gen directory of the repo. They're also included in the pre-built release artifacts on the releases page. Improvements #115 Do not replace symlink with output file (@SimplyDanny) Fixes an issue where a symlink would be replaced with a regular file #124 Fix tests (@Linus789) Removed displaying the file path when passing the --preview flag and fixed how text coloring was handled in tests Breaking #192 Rename --string-mode to --fixed-strings (@CosmicHorrorDev) Renamed -s --string-mode to -f --fixed-strings to better match similar tools -s and --string-mode will still continue to work for backwards compatibility, but are no longer documented #258 Error on $<num><non_num> capture replacement names (@CosmicHorrorDev) Previously when you tried to use a numbered capture group right before some letters in the replacement text (e.g. $1foo) then it would be considered the impossible-to-use 1foo capture. The correct way to pass the numbered capture group in this case would be to surround the number with curly braces like so ${1}foo. The error just detects this case and informs the user of the issue Docs #93 Add note about in-place file modification to --help output (@jchook) #148 Doc: nitpick -- has no special meaning to shells (@hexagonrecursion) #181 Fix man page -f flag help text (@ulope) Fixed copy-pasted text in the man page's -f flag's help text #186 Improve error message for failed replacements (@CosmicHorrorDev) #187 Freshen up README (@CosmicHorrorDev) Added a repology badge to document different installation methods Improved the formatting of the benchmarks #207 Documenting $ escape (@yahkbar) Adds a section in the README that covers that $$ is a literal $ in the replacement text #227 Improve README readability (@vassudanagunta) Various formatting improvements #231 Use clap_mangen and roff to generate manpage (@nc7s) This change ensures the man page contents stay in sync with the CLI automatically, and fixes some broken rendering of the existing manpage #243 Exclude unsupported packages from the repology badge (@CosmicHorrorDev) Pre-built Releases (11295fb) Add ARM target (@chmln) Added the arm-unknown-linux-gnueabihf target to CI and releases #114 Adding aarch64-apple-darwin target (@yahkbar) #143 Fix paths to release binary in "publish" action (@skrattaren) #179 Build Adjustments (@yahkbar) striped release binaries and added the aarch64-ubuntu-linux-musl target #204 Adding armv7-unknown-linux-gnueabihf target (@yahkbar) Added the armv7-unknown-linux-gnueabihf target to the list of targets to build in CI and for each release #205 Resolving broken aarch64-apple-darwin tests (@yahkbar) Switched aarch64-apple-darwin to only try building the executable without running the tests since there seems to be no easy way to test for ARM Apple targets #206 Adding Windows builds back (@yahkbar) Added the x86_64-pc-windows-gnu and x86_64-windows-musl targets back to the list of targets to build in CI and for each release Internal #118 Fix master (@SimplyDanny) Fixes several cross-compilation issues that effected different targets in CI #182 cargo update (@CosmicHorrorDev) Bumps dependencies to their latest compatible versions #183 Switch memmap -> memmap2 (@CosmicHorrorDev) Switches away from an unmaintained crate #184 Add editor config file matching rustfmt config (@CosmicHorrorDev) Adds an .editorconfig file matching the settings listed in the .rustfmt.toml file #185 Fix warnings and clippy lints (@CosmicHorrorDev) #188 Switch atty for is-terminal (@CosmicHorrorDev) Switches away from an unmaintained crate #189 Replace structopt with clap v4 (@CosmicHorrorDev) Switches away from a defacto deprecated crate #190 Change how all shell variants are expressed (@CosmicHorrorDev) Tiny tidying up PR #196 Move generating static assets to a cargo-xtask task (@CosmicHorrorDev) Moves the generation of the man page and shell completions from a build script to a cargo-xtask task #197 Add a release checklist (@CosmicHorrorDev) #209 Dependency updates (@yahkbar) #235 Update generated assets (@CosmicHorrorDev) #236 Tone down dependabot (@CosmicHorrorDev) #245 Update sd to 2021 edition (@CosmicHorrorDev) Updates sd to the Rust 2021 edition #248 Misc Cargo.toml tweaks (@CosmicHorrorDev) Switches to use workspace edition and dependencies where appropriate #249 Resolve CI warnings (@CosmicHorrorDev) Switched from actions-rs actions to dtolnay@rust-toolchain Switched from using ::set-output to $GITHUB_ENV #251 Update dependencies (@CosmicHorrorDev) A lot of sad CI tweaking: #252 Fix build target usage in CI (@CosmicHorrorDev) #253 Improve publishing CI job (@CosmicHorrorDev) #256 More CI tweaks (@CosmicHorrorDev) #257 Fix publish action (@CosmicHorrorDev) #267 Rework the replacements flag (@CosmicHorrorDev) #269 Make modified text blue instead of green (@CosmicHorrorDev) #271 Fix release checklist indentation (@CosmicHorrorDev) #272 Remove outdated release checklist step (@CosmicHorrorDev) #274 Prepare 1.0.0-beta.0 release (@CosmicHorrorDev) #275 Update sd version in lockfile (@CosmicHorrorDev)
jperkin
pushed a commit
that referenced
this issue
Dec 18, 2023
c4befd0 Merge pull request #223 from danielgtaylor/dependabot/go_modules/golang.org/x/net-0.17.0 2db8c10 Merge pull request #225 from exoscale/cached-transport c0f180c Merge pull request #226 from danielgtaylor/dependabot/go_modules/golang.org/x/image-0.10.0 b75a307 Merge pull request #227 from cbliard/patch-1 a92c7db Merge pull request #229 from danielgtaylor/redirect-url 21a9017 Merge pull request #233 from danielgtaylor/hide-secrets-input d16bdd7 Merge pull request #234 from danielgtaylor/clear-auth-cache 0a1f26c Update docs to use go install instead of go get 00b34d8 chore(deps): bump golang.org/x/image from 0.5.0 to 0.10.0 8135dc8 chore(deps): bump golang.org/x/net from 0.7.0 to 0.17.0 ac559b9 chore: add configurable redirect_url, preserve default value 97c3636 feat: add command to clear auth token cache 13fe1aa fix(api): Do not cache server responses when refreshing API defs 1ecdb09 fix: hide secret input during API config, fixes #232 9a25266 fix: use better url parsing
jperkin
pushed a commit
that referenced
this issue
Jan 9, 2024
Happy new year! 🎉 Fixes - Fixed build on FreeBSD (#214). - Fixed current track sometimes not showing as playing in tracks list. - Fixed progress slider performing double click actions with some styles. - Fixed HTML tags in playlists descriptions not displaying properly. - Fixed some systems not being able to open links or files properly. - Fixed "Added" sometimes showing negative values on just added tracks. Changes - Much improved performance when loading playlists (#102). - Added support for track queue (#63). - Added an option to ignore unavailable tracks in playlists (#209). - Added support for librespot v0.5.0 (#218). - Added tooltips for links for artists (#227). - Much improved performance with a lot of liked tracks (#228). - Added support for passing custom arguments to Spotify client (#232). - Added history. - Improved resizing with expanded album art. - Added an option for tabbed library and playlists. - The main toolbar can now be placed at the bottom of the window. - Settings can now be saved, even if an invalid Spotify client path is provided. - The shape of the album art can now be changed. - Improved performance with "Recent" playlist sorting. - Added new tooltips for tracks, albums and playlists.
jperkin
pushed a commit
that referenced
this issue
Feb 14, 2024
v0.20.1
What's Changed
Switch to GitHub Actions CI. by @patrickt in #166
Add the same PR template as for tree-sitter-javascript by @mjambon in #169
Fixed CRLF behavior for tests by @ahelwer in #188
Fix CRLF behavior mismatch during error recovery by @ahelwer in #189
Endless methods by @aibaars in #190
Add forwarded parameters/arguments by @aibaars in #191
Disable C++ exceptions when compile for wasm32-wasi by @glebpom in #192
Pattern matching by @aibaars in #193
Improve grammar after the introduction of case-in pattern matching by @aibaars in #197
Add parenthesized_pattern by @aibaars in #198
Ruby 3.1 features by @aibaars in #201
Update to Node 16 by @mattmassicotte in #206
C bindings by @mattmassicotte in #199
Parser improvements by @aibaars in #207
CI: use windows-2019 for now by @aibaars in #209
Add named rules for the various call operators by @aibaars in #211
Update Makefile by @mattmassicotte in #213
Allow newer tree-sitter upstream library. by @patrickt in #215
Bump tree-sitter version to 0.20 by @hendrikvanantwerpen in #214
Fix parse error in 'foo! if condition' by @aibaars in #216
Parser improvements: != operator and key: [line_break] by @aibaars in #220
Some improvements to the parser by @aibaars in #222
Wrap class, module, method, and block bodies in a named node by @npezza93 in #224
Parser improvments: quoted heredocs and short-hand interpolations by @aibaars in #225
Add body field for end-less methods by @aibaars in #226
Swift bindings by @mattmassicotte in #227
fix: rename reserved word “arguments” by @drwpow in #229
Bump versions in #208
Anonymous (hash) splat arguments by @aibaars in #233
One-line pattern matching by @aibaars in #194
Scanner: do not skip LINE_BREAKs before .. and ... by @aibaars in #238
Fix non-termination in parser by @aibaars in #239
Fix scanning of division vs regex before line ending by @aibaars in #246
Fix 'case' with newlines before expression by @aibaars in #247
jperkin
pushed a commit
that referenced
this issue
Feb 23, 2024
v0.4.1
Fixes
Fix an issue where fonts can fail to be detected on some systems (#250)
Docs
Update the repo link to our newly minted organization (#251)
v0.4.0
I'd like to start with a huge thanks to all of our contributors. This release
wouldn't have happened nearly as soon, nor would it have had as many fixes and
features without everyone's help ❤️
Breaking Changes
Completions are now generated ahead of time and provided with the release
assets instead of the old --gen-completions <SHELL> flag
The default light theme code-highlighter was changed from the
inpsired-github to the new github syntax highlighter
We have a new wayland feature that is enabled by default for clipboard
support. If you don't use wayland and you run into wayland related build
errors then consider building with the --no-default-features with the
optional --features x11 if you're using Xorg still
The default zoom-out keybind is now <Ctrl+=> instead of <Ctrl++> and
zoom-reset is now unbound by default instead of <Ctrl+=>
Features
Font fallback is now supported 🎉 (less tofu --> more emojis)
A lot more embedded syntax highlighting themes (#219)
The full list is always in the inlyne.default.toml file
Add clipboard support for wayland (#243)
Add support for color-scheme specific <picture>s (#236)
Underlines are now supported in syntax highlighting (#221 and #225)
extra keybindings now override base (#224)
Use human-panic for more user-friendly panic messages (#172)
Support table column alignment (#136)
Use taffy for laying out tables (#129)
Fixes
Inherit alignment for headers (#241)
Allow for px suffix on pixel length (#238)
Mimic GitHub's anchorizer for creating headers' anchor links (#227)
Correctly reset table column alignment (#218)
Reset scroll on markdown navigation (#213)
Debounce file watcher events (#200)
More gracefully handle failures in image loading (#187)
Switch the TLS library from openssl to rustls (#179)
Fixes some issues with window's failing some image requests
Documentation
Document fontconfig dependency (#220)
Internal
The usual swarm of non-user-facing changes
jperkin
pushed a commit
that referenced
this issue
Apr 3, 2024
Features / Improvements ✨
Links should be "openable" (#43)
Add support for previewing images in room scrollback (#108)
Enable sending strikethrough text (#141)
Support composing messages in an external editor (#155)
Add support for logging in with SSO (#160)
Add new command for logging out of iamb session (#162)
Support custom sorting for room and user lists (#170)
feat: desktop file for GUI environment launchers (#178)
Add a new :chats window that lists both DMs and Rooms (#184)
Add support for desktop notifications (#192)
Support coloring entire message with the user color (#193)
Indicate and sort on rooms with unread messages (#205)
Support following the .well-known entries for a username's domain (#209)
Add support for threads (#216)
Add support for custom key macros (#217)
Support displaying shortcodes instead of Emojis in messages (#222)
Support configuring user gutter width (#223)
Enable autolinking when rendering Markdown (#226)
Support notifications via terminal bell (#227)
Support loading a TOML configuration (#229)
Add commands for importing and exporting room keys (#233)
Documentation / README updates 📚
Fix example config (#140)
Add more documentation (#166)
Update README.md to add openSUSE Tumbleweed (#191)
Add snap install instructions (#210)
Add example of mapping "V" to toggle message selection mode (#195)
Update manual pages to use mdoc(7) and list commands (#230)
Add an icon for iamb (#232)
Bug Fixes 🐞
Fix not showing display names in already synced rooms (#171)
Fix image preview offset (#179)
Update to ratatui-image@0.4.3 to use native sixel lib (#181)
Fix truncation/padding for non-ASCII sender names (#182)
Fix crash on small image preview (#198)
Download rooms keys from backups if they exist (#211)
Ignore key releases on platforms that support it (#220)
Provide better error message for M_UNKNOWN_TOKEN (#101)
Fix entering thread view when there's no messages yet (#224)
Fix image previews in replies (#225)
Reset message bar when ! is passed with :cancel (#231)
Wait to log in before starting background tasks (#234)
Performance ⏱️
Reduce CPU usage by instead fetching read receipts after related sync events (#168)
Load receipts for room before acquiring lock (#213)
Building / Housekeeping 🧹
Update Cargo.lock file (#157)
Update modalkit for newer ratatui and crossterm
Fix CI workflow (#164)
Use mozilla-actions/sccache-action for caching builds (#169)
Enable direnv for Nix flakes (#183)
Update to matrix-sdk@0.7.1 (#200)
Rename Nix flake build input from pkgconfig to pkg-config (#203)
Update modalkit dependencies (#204)
Move LTO into its own "release-lto" profile (#207)
Fix Nix flake hashes (#206)
Pull in modalkit repository with a Cargo.lock (#208)
Nix flake updates (#214)
Update to ratatui-image@0.8.1 (#215)
Support linking against system OpenSSL (#218)
GitHub workflow should use --locked to avoid broken Cargo.lock (#219)
Fix odd Windows-only compile error (#221)
jperkin
pushed a commit
that referenced
this issue
May 6, 2024
🚀 Features Remove support for python 3.7 and older - by @frostming in #232 (32e3a) Add tag_filter as a way to pre-filter tags - by @mezuzza in #225 (9915c) 🐞 Bug Fixes Error about dynamic project version - by @cntvc in #235 (146b1) ci: CI matrix on macos latest - by @frostming (080b4) 💻 Chores Use Literal type for valid target values - by @DetachHead, pre-commit-ci[bot] and Frost Ming in #227 (a210b)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Under the section "Fetch bootstrap and packages" it seems the links should point to the full bootstrap environments rather than the pbulk environments. That is:
should be:
I am running this within OmniOS and deriving it from the instructions on https://pkgsrc.joyent.com/install-on-illumos/ which specifies using the full bootstrap environments. The boostrap-pbulk environments don't work -- they cannot fetch packages due to SSL error (pkg_add says "SSL is disabled") and they are much more limited (e.g. judging by the contents of /opt/local/bin). However the full bootstrap environments work perfectly.
The text was updated successfully, but these errors were encountered: