It is recommended to use aluminum PCB for heat consideration
Count | Component | Details | Datasheet |
---|---|---|---|
3x | C1 / C3 / C4 | CAP CER 1UF 25V X7R 0805 | Link |
3x | C2 / C5 / C6 | CAP CER 2.7UF 25V X5R 1206 | |
3x | D1 / D10 / D11 | DIODE SCHOTTKY 2A 100V SMA | |
4x | D12 / D13 / D14 / D15 | LED OSLON SSL120 BLUE 455NM SMD | |
4x | D16 / D17 / D18 / D19 | LED OSLON SSL120 RED 727NM SMD | |
8x | D2 / D3 / D4 / D5 / D6 / D7 / D8 / D9 | LED OSLON SSL120 RED 657NM SMD | |
3x | L1 / L2 / L3 | FIXED IND 47UH 2.7A 100 MOHM SMD | |
1x | J2 | CONN HEADER XH SMD 4POS 2.5MM | |
3x | R1 / R3 / R5 | RES SMD 3.3K OHM 0.1% 1/8W 0805 | |
3x | R2 / R4 / R6 | RES SMD 43K OHM 0.1% 1/8W 0805 | |
3x | R7 / R8 / R9 | RES 0 OHM JUMPER 3/4W 2010 | |
3x | RV1 / RV2 / RV3 | TRIMMER 5K OHM 0.25W SMD | |
1x | U2 | IC LED DRIVER RGLTR DIM 1A 8SO | Link |
2x | U1 / U3 | IC LED DRIVER RGLTR DIM 1A 8SO | Link |
1x | J1 | wago 2060 402 |
This project is managed and available on
You can view it here. Start your own Powerful Prototype on here.