v1.2.0

v1.2.0（versionCode 249）— 时分秒逐位取色、整串渐变、自定义任务

新增功能

• 6 位数字独立取色：时十位 / 时个位 / 分十位 / 分个位 / 秒十位 / 秒个位各一个颜色。10 颗预设色点、色相·饱和度·明度三条滑杆、调色盘，也能跟随系统文字色。
• 点预览时间展开取色：数字放大、字距拉开，直接点某一位即选中该位；选中位有同色下划线与 2 秒一循环的发光呼吸，其余 5 位降到 30% 不透明度。
• 整串渐变：起点色 → 终点色平滑过渡，6 套渐变预设 + 两端自定义；数字颜色卡分「逐位颜色 ｜ 渐变」两页，停在哪页就是哪种模式（页签即开关）。
• 自定义任务：每小时 / 每天指定时刻，可提前 N 分钟开始、持续 N 分钟，到点自动显示或隐藏秒数；改系统时间、切时区、休眠唤醒后自动重算窗口，另有每 60 秒兜底重算。
• 悬浮时间（长按状态栏时钟）：与状态栏相同的渐变配色，改色 1 秒内跟随；等宽数字，秒数跳动时色带不再「游走」。
• 页面标题「时间显秒」改为粉尘点阵：进入时由散点聚拢成字，点一下炸开再聚回。

修复

• ColorOS 上显秒后颜色被系统「洗」回去：写入文本末尾补零宽空格，破坏系统的 HH:mm(:ss) 模式匹配，颜色得以保留。
• 「关了秒再打开，秒数不动」：补上接管分支缺失的刷新计时器。
• 部分机型单击状态栏无反应：修正触摸目标指向。
• 预览渐变与状态栏渐变有色差（仅个别亮色）：两边统一到同一套配色函数，并放宽对亮色的过度压暗。
• 个别分辨率下预览数字下半被裁：按实测字形高度反推字号上限，并加运行时兜底。
• ColorOS 15 上预览渐变一个数字一个纯色：预览卡改为自绘渐变（系统绘制路径会对 shader 按字形量化）。
• 单色模式预览冒号偏下：补冒号光学居中（上移 0.11em）。
• 打开自定义任务界面时状态栏消失：修正弹窗窗口标志。
• 空闲时持续空转耗电：自适应节流，判定真正掉色才加速，连续无异常自动停表。

优化与移除

• 移除「流动」功能（含开关与速度滑杆）：只保留静态渐变，系统界面 CPU 回到基线（约 7%，流动时最高约 40%）。
• 移除「省电自适应」：省电模式下不再暂停走秒，仅熄屏 / 非交互时降频。
• 移除独立的「小时颜色」卡与独立的「启用渐变」开关，能力并入「数字颜色」两页签。
• 设置页顶部空白带、任务编辑页「动作」行、卡片按压与音效等细节一并打磨。

说明

• 最低支持 Android 10 及以上。
• 已在 ColorOS 15 / 16（Android 15 / 16）真机验证；核心链路只用 AOSP 公开 API，其它厂商理论上同样生效，但尚未逐一真机实测。
• 安装后需重启系统界面（设置页内有「重启 SystemUI」按钮），或执行 adb shell su -c 'killall com.android.systemui'。
• 有问题或建议，欢迎到 GitHub 提 Issue。

---

v1.2.0 (versionCode 249) — per-digit colors, gradients, scheduled tasks

New

• Independent color for each of the 6 digits (tens/ones of hour, minute and second): 10 preset swatches, hue/saturation/brightness sliders, color picker, or follow the system text color.
• Tap the preview time to edit colors: digits enlarge and get spaced out; tap a digit to select it. The selected digit gets a matching underline plus a 2-second glow-breathing loop, the other five drop to 30% opacity.
• Full-string gradient: start color → end color, 6 presets plus custom endpoints. The color card has two tabs, Per-digit | Gradient; whichever tab is active is the active mode (the tab is the switch).
• Scheduled tasks: hourly or daily at a given time, start N minutes early, run N minutes, and turn seconds on or off automatically. Windows are recomputed after time/timezone changes and on wake, with a 60-second fallback.
• Floating time (long-press the status bar clock): same gradient as the status bar, following color changes within a second; tabular digits keep the band steady while seconds tick.
• The page title is now a dust-particle effect: specks gather into the text on entry and scatter when tapped.

Fixes

• Colors being stripped by the system once seconds are shown (zero-width space appended to defeat the HH:mm(:ss) pattern match).
• Seconds frozen after turning them off and on again (missing refresh timer in the takeover branch).
• Single tap on the status bar doing nothing on some devices (touch target).
• Preview vs. status bar gradient mismatch on a few bright colors (one shared color-adaptation function).
• The lower half of preview digits being clipped at some resolutions (measured ink height plus a runtime fallback).
• Preview gradient quantized to one solid color per digit on ColorOS 15 (the preview now draws the gradient itself).
• Colon sitting too low in per-digit mode (optical centering, 0.11em lift).
• Status bar disappearing while the task editor was open (window flags).
• Idle battery drain (adaptive throttling; the ticker stops when nothing is wrong).

Changed / removed

• Removed the animated "flow" feature: static gradient only; SystemUI CPU back to baseline (~7% of one core vs. up to ~40% while flowing).
• Removed the power-save adaptation: seconds keep ticking in power-save mode; only screen-off/non-interactive throttles.
• The standalone hour-color card and the standalone gradient switch were folded into the two tabs.

Notes

• Requires Android 10 or newer.
• Verified on real devices running ColorOS 15 / 16 (Android 15 / 16). The core path only uses public AOSP APIs, so other vendors should work in theory but have not been verified one by one.
• Restart SystemUI after installing (there is a button in the settings page), or run adb shell su -c 'killall com.android.systemui'.
• Issues and suggestions: please open a GitHub issue.

v1.0.9

v1.0.9（versionCode 10）— 设置页视觉与体验优化

新增功能

• 预览卡秒刻度盘：预览卡新增一圈刻度盘，颜色采用深绿、深青、深海军蓝、深金等沉稳配色，随时间缓缓流动变化；深色模式下自动切换为更亮的配色，依然清晰可见。

优化

• 小时颜色色块光晕更亮：色块呼吸时，最亮的一下比之前更亮、更明显。
• 关闭小时颜色时装饰弧不再消失：右下角三条装饰弧现在始终显示；关闭小时颜色时色块只是变淡，不再有弧线透上来、像是盖在色块上的情况。
• 读屏（TalkBack）更好用：开启手机读屏后，小时颜色的每个色块会念出颜色名称和色号（例如「红色 #F44336」），选中哪个也会播报；设置页里的按钮也都能被正确识别为可点击。
• 更省电、更流畅：设置页滚动到预览卡不可见时，自动停止它的动画刷新以省电；同时修复了深色模式下刻度盘有一段颜色几乎看不见的问题。

说明

• 最低支持 Android 10 及以上。
• 主要在 ColorOS（一加）上做过真机验证；其他品牌手机走的是通用适配，逻辑上兼容，但没有逐一实测。
• 有问题或建议，欢迎到 GitHub 提 Issue。

---

v1.0.9 (versionCode 10) — Settings UI & Experience Polish

New Features

• Second-tick dial on the preview card: The preview card now shows a ring of tick marks in calm colors (deep green, deep teal, deep navy, deep gold) that slowly shift over time. In dark mode it switches to a brighter palette so it stays clearly visible.

Improvements

• Brighter glow on hour-color swatches: The breathing glow on the color swatches now peaks brighter and more noticeable.
• Decorative arcs stay when hour color is off: The three decorative arcs in the corner now always stay visible. When hour color is turned off, the swatches just dim — no more arcs showing through them.
• Better screen-reader support: With a screen reader, each hour-color swatch now announces its name and hex code (e.g. "红色 #F44336"), and the selected one is announced too. Buttons on the settings page are now properly exposed as actionable.
• More power-efficient and smoother: The preview animation auto-pauses when scrolled off-screen, saving battery. Also fixed a dark-mode issue where part of the dial was nearly invisible.

Notes

• Requires Android 10 or later.
• Primarily verified on ColorOS (OnePlus); other brands use generic adaptation and should work, but aren't individually tested.
• Issues and suggestions are welcome on GitHub.

Full Changelog: https://github.com/kelebao/ClockSeconds/blob/main/CHANGELOG.md

v1.0.8

v1.0.8 (versionCode 9)

安全加固：配置接收器改用 signature 级自定义权限，阻止任意应用广播代写 Settings.Secure/Global。

新增：状态栏时间识别名「自动检测」一键配置；手填识别名二次校验。

优化：自动检测移入设置弹窗作为主操作；移除浮窗日期行；措辞「时钟」→「时间」。

---

Security: config receiver now requires a signature-level custom permission, blocking arbitrary apps from broadcasting writes into Settings.Secure/Global.

New: one-tap auto-detect for the status bar time view name; confirmation dialog for suspicious manual entries.

Improved: auto-detect moved into the settings dialog as the primary action; floating-window date row removed; wording unified to "time".

Full Changelog: https://github.com/kelebao/ClockSeconds/blob/main/CHANGELOG.md

v1.0.7

v1.0.7 (versionCode 8)

体验与健壮性增强：下拉磁贴一键开关、浮窗位置与尺寸记忆、浮窗日期显示、浮窗双击切换显秒、省电模式自适应、时钟识别可配置、模块自保护。

Experience & Robustness: Quick Settings tile, floating window memory, floating window date, double-tap floating window, power-save adaptive, configurable clock ID, self-protection.

Full Changelog: https://github.com/kelebao/ClockSeconds/blob/main/CHANGELOG.md

v1.0.6

时钟显秒（Clock Seconds）v1.0.6

修复

• 小米 / 其它厂商状态栏时间消失（#2）：此前「固定占位宽度」逻辑对所有机型无条件执行，在 MiuiClock（wrap_content 且未重写 onMeasure）上会把时间文本裁掉。现在宽度锁定只在 ColorOS 系（OPPO / 一加 / realme）生效，且只设 minWidth、不再设 maxWidth——minWidth 已足够避免显秒开关引起的横向移位，maxWidth 在字体测量有偏差时会裁切文本。其它厂商不再对时钟视图做任何宽度约束。
• 该问题在 HyperOS 4 / Android 17（小米 12S Ultra）上复现，感谢 @1332514136 提供的高质量定位分析。

说明

• 仅作用域：com.android.systemui
• 最低支持：Android 10
• 签名证书 SHA-256 与 v1.0.5 一致（2850e82a…），可直接覆盖升级

---

Clock Seconds v1.0.6

Fixed

• Clock disappearing on Xiaomi / other vendors (#2): the "fixed placeholder width" logic used to run unconditionally on every vendor; on MiuiClock (which is wrap_content and does not override onMeasure) it clipped the clock text away. The width lock is now applied only on ColorOS-family devices (OPPO / OnePlus / realme), and it sets only minWidth, no longer maxWidth — minWidth alone already prevents the horizontal shift when seconds are toggled, while maxWidth clips text whenever font measurement is slightly off. Other vendors get no width constraint at all.
• Reported on HyperOS 4 / Android 17 (Xiaomi 12S Ultra); thanks to @1332514136 for the excellent root-cause analysis.

Notes

• Scope only: com.android.systemui
• Minimum supported: Android 10
• Same signing certificate SHA-256 as v1.0.5 (2850e82a…), so it installs over the previous version without uninstalling

v1.0.5

时钟显秒（Clock Seconds）v1.0.5

新增

• 应用内更新检查：打开设置页自动检测新版本（可在设置中关闭），发现新版本时弹窗提醒，一键跳转 Releases 页；也可手动点击「检查更新」
• 设置页「关于模块」：显示版本号，并提供 GitHub 源码与开放源代码（Xposed API，Apache-2.0）入口
• 获取更新入口：设置页可直接打开 Releases 页下载最新版

优化

• 模块介绍精简（21 语言）：移除「真机验证 / 兼容厂商 / 最低 Android 10」等冗余描述，只保留功能说明，模块卡片更清爽

说明

• 仅作用域：com.android.systemui
• 最低支持：Android 10
• 签名证书 SHA-256 与 v1.0.4 一致（2850e82a…），可直接覆盖升级，无需卸载

---

Clock Seconds v1.0.5

New

• In-app update check: the settings page automatically checks for a new version on open (can be turned off), shows a dialog when one is found and takes you to the Releases page in one tap; there is also a manual "Check for updates" button
• "About" section in settings: shows the version and provides entries to the GitHub source and open-source licenses (Xposed API, Apache-2.0)
• "Get update" entry: open the Releases page directly from the settings page

Improved

• Shorter module description (21 languages): removed the redundant "verified on device / vendor compatibility / minimum Android 10" sentence, keeping only the feature description, so the module card stays clean

Notes

• Scope only: com.android.systemui
• Minimum supported: Android 10
• Same signing certificate SHA-256 as v1.0.4 (2850e82a…), so it installs over the previous version without uninstalling

v1.0.4

时钟显秒（Clock Seconds）v1.0.4

新增

• 小时十位数标红：如 13 的「1」、05 的「0」，分钟与秒保持系统原色；无论显秒开启或关闭均保持红色
• 全厂商适配：移除 ColorOS 单系统限制，基于标准 API 与识别规则，尝试支持小米、荣耀、vivo、一加等所有厂商
• 界面 21 种语言：简体中文、English、繁體中文、日本語、한국어、Türkçe、Русский、Tiếng Việt、ไทย、Deutsch、Español、Français、Українська、Polski、Português (Brasil)、فارسی、العربية、Bahasa Indonesia、Italiano、Ελληνικά、ქართული，自动跟随系统语言

修复

• 点击时钟不切换：ColorOS 通知面板拦截状态栏区域触摸，改用全局 View.dispatchTouchEvent 边界命中判定，不消费事件，下拉通知栏照常
• 关显秒时红色失效（TextUtils.equals 不比较 Span 导致标红被跳过）

说明

• 仅作用域：com.android.systemui
• 最低支持：Android 10
• 已在 ColorOS 15（一加 Ace 2）真机验证

---

Clock Seconds v1.0.4

New

• Red hour tens digit: e.g. the 1 in 13, the 0 in 05; minutes and seconds keep the system color. The red stays whether seconds are shown or not
• All-vendor support: removed the ColorOS-only limit; based on standard APIs and recognition rules, trying to support Xiaomi, Honor, vivo, OnePlus and every other vendor
• 21 UI languages: 简体中文, English, 繁體中文, 日本語, 한국어, Türkçe, Русский, Tiếng Việt, ไทย, Deutsch, Español, Français, Українська, Polski, Português (Brasil), فارسی, العربية, Bahasa Indonesia, Italiano, Ελληνικά, ქართული — automatically follows the system language

Fixed

• Tapping the clock did not toggle: ColorOS's notification panel intercepts touches in the status bar area; switched to a global View.dispatchTouchEvent bounds hit-test that consumes no events, so pulling down the notification shade still works as usual
• Red highlight lost when seconds were off (TextUtils.equals does not compare Spans, so the red span was skipped)

Notes

• Scope only: com.android.systemui
• Minimum supported: Android 10
• Verified on a real device running ColorOS 15 (OnePlus Ace 2)

4-1.0.3

ColorOS 时钟显秒 v1.0.3

让状态栏（左上角）时钟显示秒，并支持单击时钟切换显秒开关。适配 ColorOS 15 及以上（OPPO / 一加 / 真我）。

本版重要变更（重写，修复崩溃）

• 彻底重写，改用 legacy Xposed API（de.robv.android.xposed:api:82），只 hook com.android.systemui 的时钟 TextView（setText 之后 / onDraw 之前覆写文本），不修改系统内部状态，因此启用后不再触发 LSPosed 安全模式（v1.0.1 / v1.0.2 因 hook 私有类导致 SystemUI 崩溃的根因已消除）。
• 仅作用域 系统界面（com.android.systemui），不再 hook 设置进程。
• 点击 / 长按时钟切换显秒，状态存 Settings.Secure，默认开启。
• 新增应用图标（状态栏左侧的模块图标为蓝发头像 + 蓝色背景）。

✅ 已在 ColorOS 15 真机实测：状态栏显秒、单击切换、下拉通知栏均正常，且 LSPosed 不会进入安全模式。

安装

1. 安装 io.github.kelebao.colorosclockseconds_1.0.3.apk
2. 在 LSPosed 中启用本模块
3. 作用域勾选：com.android.systemui
4. 重启 SystemUI 或重启设备

配置页从 LSPosed 管理器打开，不会在桌面生成图标。

校验

APK 签名证书 SHA-256：2850e82a5c4e001eb19e1d4d340bfaca049ebea1abc4f1940c02c8065137b82e

源码仓库：https://github.com/kelebao/ColorOS15ClockSeconds

v1.0.2

ColorOS 时钟显秒 v1.0.2（止血版）

让状态栏（左上角）时钟显示秒，并支持单击/长按时钟切换显秒开关。适配 ColorOS 15 及以上（OPPO / 一加 / 真我）。

本版修复

• 修复 ColorOS 15 上启用模块即触发 LSPosed 安全模式（SystemUI 崩溃）的问题
• 原生去时限路径仅在 ColorOS 17+ 启用；15/16 强制走自渲染路径
• 全局异常兜底 + 拦截器回退，确保模块不会导致系统崩溃

安装

1. 安装 APK
2. 在 LSPosed 启用本模块
3. 作用域勾选 com.android.systemui 与 com.android.settings
4. 重启这两个进程或重启设备

配置页从 LSPosed 管理器打开，不会在桌面生成图标。

校验

APK 签名证书 SHA-256：
2850e82a5c4e001eb19e1d4d340bfaca049ebea1abc4f1940c02c8065137b82e

源码仓库：https://github.com/kelebao/ColorOS15ClockSeconds

v1.0.1

ColorOS 时钟显秒 v1.0.1

让状态栏（左上角）时钟显示秒，并支持单击时钟切换显秒开关。适配 ColorOS 15 及以上（OPPO / 一加 / 真我）。

本版变更

• 包名变更为 io.github.kelebao.colorosclockseconds（满足 LSPosed 模块仓库收录要求）
• 已在 ColorOS 15 真机验证可用：状态栏显秒、单击切换、下拉通知栏均正常

安装

1. 安装 APK
2. 在 LSPosed 中启用本模块
3. 作用域勾选：com.android.systemui 与 com.android.settings
4. 重启这两个进程或重启设备

配置页从 LSPosed 管理器打开，不会在桌面生成图标。

注意

• ⚠️ 本版包名与 v1.0.0 不同，升级前请先卸载旧版本

校验

APK 签名证书 SHA-256：2850e82a5c4e001eb19e1d4d340bfaca049ebea1abc4f1940c02c8065137b82e

源码仓库：https://github.com/kelebao/ColorOS15ClockSeconds