uneven_planner

Quick Start

Step One:

Install the requirements.

gazebo plugins: (use ros noetic with Ubuntu20.04 as an example)

sudo apt install ros-noetic-robot-state-publisher*
sudo apt install ros-noetic-joint-state-controller*
sudo apt install ros-noetic-controller*
sudo apt install ros-noetic-velocity-controllers*
sudo apt install ros-noetic-effort-controllers
sudo apt install ros-noetic-position-controllers
sudo apt install ros-noetic-gazebo-ros-control
sudo apt install ros-noetic-hector-gazebo
sudo apt install ros-noetic-effort-controllers
sudo apt install ros-noetic-joint-state-controller
sudo apt install ros-noetic-position-controllers
sudo apt install ros-noetic-velocity-controllers
sudo apt install ros-noetic-ompl
sudo apt install ros-noetic-tf2-geometry-msgs ros-noetic-ackermann-msgs ros-noetic-joy 

osqp-0.6.2 and osqp-eigen v0.8.0 for mpc controller:

Firstly, go to website of OSPQ and download complete_sources.zip from the Assets of 0.6.2. Then unzip the code,

cd osqp
mkdir build && cd build
cmake ..
make
sudo make install

Go to website of osqp-eigen and download Source code.zip from the Assets of osqp-eigen v0.8.0. Then unzip the code,

cd osqp-eigen-0.8.0
mkdir build && cd build
cmake ..
make
sudo make install

NOTE: We may have forgotten other dependencies 😟, sorry!

Step Two:

Build the project:

git clone https://github.com/ZJU-FAST-Lab/uneven_planner.git
cd uneven_planner
catkin_make -DCMAKE_BUILD_TYPE=Release

Step Three:

Select different scenes to run by the scripts (map_mountain.dae is too large, can't be upload to github)

• hill: ./hill.sh
• desert: ./desert.sh
• volcano: ./volcano.sh
• forest: ./forest.sh

If this is the first time you've run the scene, you may need to wait a few moments for constructing the mapping $\mathscr{F}:SE(2)\rightarrow\mathbb{R}\times\mathbb{S}_+^2$. This could be:

When you see the point cloud in the Rviz like in the hill scene below, you can use 2D Nav Goal to choose the planning target.

NOTE:

• Due to the simplicity of the model, wheel slippage may occur in the simulation, resulting in poor trajectory tracking accuracy.
• In the forest environment, shrubs are solid triangular meshes which may cause the robot to get stuck while moving in the simulation.

Citing

The method used in this software are described in the following paper (available here)

Title: An Efficient Trajectory Planner for Car-like Robots on Uneven Terrain

Video for the IROS submission