Skip to content
This repository has been archived by the owner. It is now read-only.

DEPRECATED! Please use Adafruit Blinka instead (was: Library to provide a cross-platform GPIO interface on the Raspberry Pi and Beaglebone Black using the RPi.GPIO and Adafruit_BBIO libraries.)

master
Go to file
Code

README.md

!!!Deprecation Warning!!!

This library has been deprecated in favor of our python3 Blinka library. We have replaced all of the libraries that use this repo with CircuitPython libraries that are Python3 compatible, and support a wide variety of single board/linux computers!

Visit https://circuitpython.org/blinka for more information

CircuitPython has support for almost 200 different drivers, and a as well as FT232H support for Mac/Win/Linux!

!!!Deprecation Warning!!!

Adafruit Python GPIO Library

Library to provide a cross-platform GPIO interface on the Raspberry Pi and Beaglebone Black using the RPi.GPIO and Adafruit_BBIO libraries.

The library is currently in an early stage, but you can see how its used in the Adafruit Nokia LCD library to write Python code that is easily portable between the Raspberry Pi and Beaglebone Black.

Note that you typically don't need to install this library directly as other libraries will depend on it in their setup and automatically install it. However if you do need to manually install do so by running these commands:

  • On a Debian-based Linux like Raspbian, Ubuntu, etc. in a terminal execute:

    sudo apt-get update
    sudo apt-get install build-essential python-pip python-dev python-smbus git
    git clone https://github.com/adafruit/Adafruit_Python_GPIO.git
    cd Adafruit_Python_GPIO
    sudo python setup.py install
    
  • On Mac OSX, first install PIP by downloading the python script here and execute it with python get-pip.py in a terminal, then install the git source control system. Then in a terminal execute:

    git clone https://github.com/adafruit/Adafruit_Python_GPIO.git
    cd Adafruit_Python_GPIO
    sudo python setup.py install
    
  • On Windows, first install the latest Python 2.7 version, then install PIP by downloading the python script here and execute it with python get-pip.py in a terminal, and finally install the git source control system. Then in a git bash prompt execute:

    git clone https://github.com/adafruit/Adafruit_Python_GPIO.git
    cd Adafruit_Python_GPIO
    python setup.py install
    

Contributing

For information on contributing, such as how to run tests, etc. please see the project wiki on GitHub.

About

DEPRECATED! Please use Adafruit Blinka instead (was: Library to provide a cross-platform GPIO interface on the Raspberry Pi and Beaglebone Black using the RPi.GPIO and Adafruit_BBIO libraries.)

Resources

License

Releases

No releases published

Packages

No packages published

Languages

You can’t perform that action at this time.