issue for Install Python on ESP32 DevkitV1

[paulfjujo]

Hello,

i just installed python with CircuitPython Installer
....all step during installation were OK

but what to do after ?

on my terminal PC YAT ,connected trough USB cable (virtual port COM10)
i get nothing when i do a reset on ESP32 ...
I don't see a WIFI SSID from my ESP32
no new ip adresse visible on my SSID Freebox
so not Web Page interface.

my question

i used my Freebox SSID wifi "Freebox-5CF3C9" , wich has a
Type de sécurité : WPA2 - Personnel
"mi................................um" of 36 bytes long ...
could this cause problem ?

is the ESP in AP or STA mode used by the installer ?

nota : i did not install ,by myself
adafruit-circuitpython-doit_esp32_devkit_v1-fr-9.2.8.bin
because i think it will be istall by the installer !
either no

[dhalbert]

The password length is OK. The max is 63 or 64. Does the password contain any non-ascii characters, such as accented characters?

Try connecting manually in the REPL. Connect to the serial port that the board presents, and make sure you have a REPL with a >>> prompt, and type this:

import wifi
wifi.radio.connect("Freebox-5CF3C9", "yourlongpassword")

[dhalbert]

This is not really the right place to debug this. Our discord, https://adafru.it/discord, or the forums, https://forums.adafruit.com/viewforum.php?f=60. would be the best locations.

[paulfjujo]

Hello,

Thanks for your advise
now i get runnig my program (with web gui)

il will use adafruit forum next time