Added new board: M5Stack DinMeter (esp32s3)

ports/espressif/boards/m5stack_dinmeter/board.c

@@ -0,0 +1,107 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "mpconfigboard.h"
+#include "supervisor/board.h"
+#include "supervisor/shared/serial.h"
+#include "shared-bindings/busio/SPI.h"
+#include "shared-bindings/fourwire/FourWire.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+#include "shared-bindings/board/__init__.h"
+#include "py/runtime.h"
+#include "py/ringbuf.h"
+#include "shared/runtime/interrupt_char.h"
+
+
+uint8_t display_init_sequence[] = {
+    0x01, 0x80, 0x96,             // SWRESET and Delay 150ms
+    0x11, 0x80, 0xff,             // SLPOUT and Delay
+    0xb1, 0x03, 0x01, 0x2C, 0x2D,   // _FRMCTR1
+    0xb2, 0x03, 0x01, 0x2C, 0x2D,   // _FRMCTR2
+    0xb3, 0x06, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D, // _FRMCTR3
+    0xb4, 0x01, 0x07,             // _INVCTR line inversion
+    0xc0, 0x03, 0xa2, 0x02, 0x84,   // _PWCTR1 GVDD = 4.7V, 1.0uA
+    0xc1, 0x01, 0xc5,             // _PWCTR2 VGH=14.7V, VGL=-7.35V
+    0xc2, 0x02, 0x0a, 0x00,        // _PWCTR3 Opamp current small, Boost frequency
+    0xc3, 0x02, 0x8a, 0x2a,
+    0xc4, 0x02, 0x8a, 0xee,
+    0xc5, 0x01, 0x0e,             // _VMCTR1 VCOMH = 4V, VOML = -1.1V
+    0x36, 0x01, 0xc8,             // MADCTL Rotate display
+    0x21, 0x00,                  // _INVON
+    0x3a, 0x01, 0x05,             // COLMOD - 16bit color
+    0xe0, 0x10, 0x02, 0x1c, 0x07, 0x12, 0x37, 0x32, 0x29, 0x2d, 0x29, 0x25, 0x2B, 0x39, 0x00, 0x01, 0x03, 0x10, // _GMCTRP1 Gamma
+    0xe1, 0x10, 0x03, 0x1d, 0x07, 0x06, 0x2E, 0x2C, 0x29, 0x2D, 0x2E, 0x2E, 0x37, 0x3F, 0x00, 0x00, 0x02, 0x10, // _GMCTRN1
+    0x13, 0x80, 0x0a,             // _NORON
+    0x29, 0x80, 0x64              // _DISPON
+};
+
+
+// Overrides the weakly linked function from supervisor/shared/board.c
+void board_init(void) {
+    busio_spi_obj_t *spi = common_hal_board_create_spi(0);
+    fourwire_fourwire_obj_t *bus = &allocate_display_bus()->fourwire_bus;
+    bus->base.type = &fourwire_fourwire_type;
+
+    // see here for inspiration: https://github.com/m5stack/M5GFX/blob/33d7d3135e816a86a008fae8ab3757938cee95d2/src/M5GFX.cpp#L1350
+    common_hal_fourwire_fourwire_construct(
+        bus,
+        spi,
+        &pin_GPIO4,     // DC
+        &pin_GPIO7,     // CS
+        &pin_GPIO8,     // RST
+        40000000,       // baudrate
+        0,              // polarity
+        0               // phase
+        );
+    busdisplay_busdisplay_obj_t *display = &allocate_display()->display;
+    display->base.type = &busdisplay_busdisplay_type;
+
+    common_hal_busdisplay_busdisplay_construct(
+        display,
+        bus,
+        240,            // width (after rotation)
+        135,            // height (after rotation)
+        40,             // column start
+        52,             // row start
+        0,              // rotation
+        16,             // color depth
+        false,          // grayscale
+        false,          // pixels in a byte share a row. Only valid for depths < 8
+        1,              // bytes per cell. Only valid for depths < 8
+        false,          // reverse_pixels_in_byte. Only valid for depths < 8
+        true,          // reverse_pixels_in_word
+        MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command
+        MIPI_COMMAND_SET_PAGE_ADDRESS,   // set row command
+        MIPI_COMMAND_WRITE_MEMORY_START, // write memory command
+        display_init_sequence,
+        sizeof(display_init_sequence),
+        &pin_GPIO9,    // backlight pin
+        NO_BRIGHTNESS_COMMAND,
+        1.0f,           // brightness
+        false,          // single_byte_bounds
+        false,          // data_as_commands
+        true,           // auto_refresh
+        80,             // native_frames_per_second
+        true,           // backlight_on_high
+        false,          // SH1107_addressing
+        50000           // backlight pwm frequency
+        );
+}
+
+
+bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
+    // Hold pin must be set high to avoid a power off when battery powered
+    if (pin_number == 46) {
+        // Turn on hold output
+        config_pin_as_output_with_level(pin_number, true);
+        return true;
+    }
+    return false;
+}
+
+// TODO: Should we turn off the display when asleep, in board_deinit() ?

ports/espressif/boards/m5stack_dinmeter/mpconfigboard.h

@@ -0,0 +1,22 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2024 CDarius
+// SPDX-FileCopyrightText: Copyright (c) 2025 juergenpabel
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "M5Stack DinMeter"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define CIRCUITPY_BOARD_I2C         (2)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO12, .sda = &pin_GPIO11}, \
+                                     {.scl = &pin_GPIO15, .sda = &pin_GPIO13}}
+
+#define CIRCUITPY_BOARD_SPI         (1)
+#define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO6, .mosi = &pin_GPIO5}}
+
+#define CIRCUITPY_I2C_ALLOW_INTERNAL_PULL_UP (1)

ports/espressif/boards/m5stack_dinmeter/mpconfigboard.mk

@@ -0,0 +1,15 @@
+USB_VID = 0x303A
+USB_PID = 0x830B
+
+USB_PRODUCT = "DinMeter"
+USB_MANUFACTURER = "M5Stack"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 8MB
+
+# Very few pins.
+CIRCUITPY_ESPCAMERA = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0

ports/espressif/boards/m5stack_dinmeter/pins.c

@@ -0,0 +1,61 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+// SPDX-FileCopyrightText: Copyright (c) 2025 Juergen Pabel
+//
+// SPDX-License-Identifier: MIT
+
+#include "shared-bindings/board/__init__.h"
+
+#include "shared-module/displayio/__init__.h"
+
+CIRCUITPY_BOARD_BUS_SINGLETON(porta_i2c, i2c, 1)
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    // Port A
+    { MP_ROM_QSTR(MP_QSTR_PORTA_SCL), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_PORTA_SDA), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
+
+    // Port B
+    { MP_ROM_QSTR(MP_QSTR_PORTB_IN), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_PORTB_OUT), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO2) },
+
+    // Encoder
+    { MP_ROM_QSTR(MP_QSTR_ENC_A), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_ENC_B), MP_ROM_PTR(&pin_GPIO40) },
+
+    // Button
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO0) },
+
+    // Misc
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_KNOB_BUTTON), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_POWER_HOLD), MP_ROM_PTR(&pin_GPIO46) },
+
+    // Display
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_GPIO9) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_PORTA_I2C), MP_ROM_PTR(&board_porta_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)}
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/m5stack_dinmeter/sdkconfig

@@ -0,0 +1,14 @@
+#
+# Espressif IoT Development Framework Configuration
+#
+#
+# Component config
+#
+#
+# LWIP
+#
+# end of LWIP
+
+# end of Component config
+
+# end of Espressif IoT Development Framework Configuration