stm32f401

Guide and example code on how to use the "Black Pill" Board from AZ-Delivery. (STM32F401 Development Board V 3.0 84Mhz 64KB SRAM 256KB Flash)

Required software:

For flashing the code to the board:

C compiler for ARM:

Run make It should create files main.elf, main.dump and main.bin

Connect the board to the computer using a USB-C cable.

Press both the NRST and the BOOT0 button. Then first release the NRST button and after that the BOOT0 button.

Run command: lsusb

Make sure that the output contains the following line:

Bus 001 Device 030: ID 0483:df11 STMicroelectronics STM Device in DFU Mode

Run make flash to upload the code to the board.

Name		Name	Last commit message	Last commit date
Latest commit History 4 Commits
Makefile		Makefile
README.md		README.md
boot.o		boot.o
boot.s		boot.s
flash.bin		flash.bin
gpio.h		gpio.h
linker.ld		linker.ld
main.bin		main.bin
main.c		main.c
main.dump		main.dump
main.elf		main.elf
main.o		main.o