updated links in tutorials

Author: jhansson-ard

content/hardware/04.pro/boards/portenta-h7/tutorials/ble-connectivity/content.md

@@ -48,7 +48,7 @@ To communicate with the Portenta H7 via Bluetooth®, we are going to start by up
 
 ### 1. The Basic Setup
 
-Begin by plugging in your Portenta board to the computer using a USB-C cable and open the Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](por-ard-gs) before you proceed.
+Begin by plugging in your Portenta board to the computer using a USB-C cable and open the Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](setting-up-portenta) before you proceed.
 
 ![The Portenta H7 can be connected to the computer using an appropriate USB-C cable](assets/por_ard_ble_basic_setup.svg)
 

content/hardware/04.pro/boards/portenta-h7/tutorials/creating-gui-with-lvgl/content.md

@@ -54,7 +54,7 @@ This tutorial will guide you through building a basic user interface using the L
 
 ### 1. The Basic Setup
 
-Begin by plugging your Portenta board into the computer using a USB-C cable and open the Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](por-ard-gs) before you proceed.
+Begin by plugging your Portenta board into the computer using a USB-C cable and open the Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](setting-up-portenta) before you proceed.
 
 ![The Portenta H7 can be connected to the computer using an appropriate USB-C cable](assets/por_ard_lvgl_basic_setup.svg)
 
@@ -108,7 +108,7 @@ Compile and upload the sketch to your Portenta H7. At this point your board beco
 
 ![Connecting the USB peripherals and the display to Portenta.](assets/por_ard_lvgl_connect_monitor.svg)
 
-***If you aren't familiar how the USB host works, we recommend you to have a look at the [USB Host tutorial](https://docs.arduino.cc/tutorials/portenta-h7/por-ard-usb).***
+***If you aren't familiar how the USB host works, we recommend you to have a look at the [USB Host tutorial](https://docs.arduino.cc/tutorials/portenta-h7/usb-host).***
 
 Our label object currently has LVGL's default style. If you want to customize the style you can have a look at LVGL's [documentation](https://docs.lvgl.io/latest/en/html/widgets/label.html).
 

content/hardware/04.pro/boards/portenta-h7/tutorials/dual-core-processing/content.md

@@ -48,7 +48,7 @@ To best illustrate the idea of dual core processing, you will be running two sep
 ![Running two different sketch files on the different cores.](assets/por_ard_dcp_tutorial_overview.svg)
 
 ### 1. The Basic Setup
-Begin by plugging-in your Portenta board to your computer using an appropriate USB-C cable and have the  Arduino IDE or the Arduino Pro IDE  open. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [Setting Up Portenta H7 For Arduino](por-ard-gs) before you proceed.
+Begin by plugging-in your Portenta board to your computer using an appropriate USB-C cable and have the  Arduino IDE or the Arduino Pro IDE  open. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [Setting Up Portenta H7 For Arduino](setting-up-portenta) before you proceed.
 
 ![A Basic setup of the board attached to your computer](../setting-up-portenta/assets/por_ard_gs_basic_setup.svg)
 

content/hardware/04.pro/boards/portenta-h7/tutorials/flash-optimized-key-value-store/content.md

@@ -44,7 +44,7 @@ In this tutorial, we are going to save a value persistently inside the Flash mem
 ***Important: The TBStore API optimizes for access speed, reduce [wearing of the flash](https://en.wikipedia.org/wiki/Flash_memory#Memory_wear) and minimize storage overhead. TBStore is also resilient to power failures. If you want to use the flash memory of the microcontroller, always prefer the TDBStore approach over a direct access to the FlashIAP block device.***
 
 ### 1. The Basic Setup
-Begin by plugging in your Portenta board to the computer using a USB-C cable and open the Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](por-ard-gs) before you proceed.
+Begin by plugging in your Portenta board to the computer using a USB-C cable and open the Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](setting-up-portenta) before you proceed.
 
 ### 2. Create the Structure of the Program
 Let's program the Portenta with a sketch. We will also define a few helper functions in a supporting header file.

content/hardware/04.pro/boards/portenta-h7/tutorials/lauterbach-debugger/content.md

@@ -36,7 +36,7 @@ This tutorial will show you how to use the Lauterbach TRACE32 GDB front-end debu
 
 In this tutorial you will load an application on the Portenta H7 board which includes the Monitor for Remote Inspection (MRI). This is a GDB compatible serial monitor which is included in the ThreadDebug sketch in the Arduino IDE Examples for Portenta H7 (M7 core) and in all examples in the TRACE32 demo directory of the TRACE32 installation. Throughout this document the **double-tilde (~~)** is used as a place holder for the directory where you unzipped the TRACE32 software.
 
-***This tutorial assumes that you have already installed the Arduino IDE or Arduino Pro IDE and configured it to support the Portenta H7 board. Please refer to [Setting Up Portenta H7 For Arduino](por-ard-gs) before you proceed.***
+***This tutorial assumes that you have already installed the Arduino IDE or Arduino Pro IDE and configured it to support the Portenta H7 board. Please refer to [Setting Up Portenta H7 For Arduino](setting-up-portenta) before you proceed.***
 
 ### 1. Downloading the TRACE32 Debugger
 

content/hardware/04.pro/boards/portenta-h7/tutorials/over-the-air-update/content.md

@@ -401,4 +401,4 @@ void loop()
 For troubleshooting the issues that might have arose following the tutorial, you can use following tips to solve the issue. 
 
 - If it logs there has been an issue with Wi-Fi module, means the device may have suffered from losing the Wi-Fi firmware partition. To solve this, you will have to use **PortentaWiFiFirmwareupdater** sketch found on Arduino IDE examples to fix the issue. 
-- QSPI storage may throw error -3 while running Portenta H7 OTA QSPI example. To fix this you can use this guide of [Reading and Writing Flash Memory](https://docs.arduino.cc/tutorials/portenta-h7/por-ard-flash/) in the section **Programming the QSPI Flash**. After this, run the example and it should have been solved by eliminating error -3 (OTA Storage initialization error). 
+- QSPI storage may throw error -3 while running Portenta H7 OTA QSPI example. To fix this you can use this guide of [Reading and Writing Flash Memory](https://docs.arduino.cc/tutorials/portenta-h7/reading-writing-flash-memory) in the section **Programming the QSPI Flash**. After this, run the example and it should have been solved by eliminating error -3 (OTA Storage initialization error). 

content/hardware/04.pro/boards/portenta-h7/tutorials/reading-writing-flash-memory/content.md

@@ -463,4 +463,4 @@ void loop() {}
 We have learned how to use the available space in the Flash memory of the microcontroller to read and save custom data. It's not recommended to use the Flash of the microcontroller as the primary storage for data-intensive applications. It is better suited for read/write operations that are performed only once in a while such as storing and retrieving application configurations or persistent parameters.
 
 ## Next Steps
-Now that you know how to use block device to perform reading and writing Flash memory you can look into the [next tutorial](https://www.arduino.cc/pro/tutorials/portenta-h7/por-ard-kvs) on how to use the [TDBStore API](https://os.mbed.com/docs/mbed-os/v6.9/apis/kvstore.html) to create a [key value store](https://en.wikipedia.org/wiki/Key%E2%80%93value_database) in the Flash memory.
+Now that you know how to use block device to perform reading and writing Flash memory you can look into the [next tutorial](https://www.arduino.cc/pro/tutorials/portenta-h7/flash-optimized-key-value-store) on how to use the [TDBStore API](https://os.mbed.com/docs/mbed-os/v6.9/apis/kvstore.html) to create a [key value store](https://en.wikipedia.org/wiki/Key%E2%80%93value_database) in the Flash memory.

content/hardware/04.pro/boards/portenta-h7/tutorials/usb-host/content.md

@@ -75,7 +75,7 @@ Thanks to USB OTG (On The Go) specification the Portenta H7 can switch between h
 
 ### 1. The Basic Setup
 
-Begin by plugging in your Portenta board to the computer using a USB-C  cable and open the Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you  check out how to [set up the Portenta H7 for Arduino](por-ard-gs) before you proceed.
+Begin by plugging in your Portenta board to the computer using a USB-C  cable and open the Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you  check out how to [set up the Portenta H7 for Arduino](setting-up-portenta) before you proceed.
 
 ![The Portenta H7 can be connected to the computer using an appropriate USB-C cable](assets/por_ard_usbh_basic_setup.svg)
 

content/hardware/04.pro/boards/portenta-h7/tutorials/wifi-access-point/content.md

@@ -53,7 +53,7 @@ In this tutorial you are going to convert the board into an access point and use
 ![A mobile device controlling the different LEDs on the board ](assets/por_ard_ap_tutorial_overview.svg)
 
 ### 1. The Basic Setup
-Begin by plugging in your Portenta board to your computer using a USB-C cable and open the  Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](./por-ard-gs) before you proceed. 
+Begin by plugging in your Portenta board to your computer using a USB-C cable and open the  Arduino IDE or the Arduino Pro IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](./setting-up-portenta) before you proceed. 
 
 ![The Portenta H7 can be connected to the computer using an appropriate USB-C cable](assets/por_tut1_im1.png)
 

content/hardware/04.pro/carriers/edge-control/essentials.md

@@ -1,5 +1,5 @@
 <EssentialsColumn title="First Steps">
-    <EssentialElement link="/tutorials/edge-control/ec-ard-gs" title="Quickstart Guide" type="getting-started">
+    <EssentialElement link="/tutorials/edge-control/getting-started-edge-control" title="Quickstart Guide" type="getting-started">
         A quick guide to installing your board with the Arduino IDE.
     </EssentialElement>