library to support application development using mcp23008 i/o expander

[AvinasheeTech]

No description provided.

[github-actions]

A problem was found with your submission https://github.com/bheesma-10/mcp23017-arduino

❌ ERROR: Submission URL is already in the Library Manager index.

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/bheesma-10/MCP23008_I2C:

Linting library in MCP23008_I2C
ERROR: Path does not contain a valid Arduino library. See:                                                              
       https://arduino.github.io/arduino-cli/latest/library-specification (Rule LS001)                                  
INFO: No header file found matching library name (MCP23008_I2C.h). Best practices are for primary header filename to    
      match library name. (Rule LS008)                                                                                  
ERROR: Incorrect src folder name case: MCP23008_I2C/Src. This will cause                                                
       the library to not be recognized on case-sensitive file systems. See:                                            
       https://arduino.github.io/arduino-cli/latest/library-specification/#library-root-folder (Rule LS009)             
WARNING: No example sketches found. Please provide examples. See:                                                       
         https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples (Rule LD004)              
WARNING: Potentially misspelled examples folder name found: MCP23008_I2C/example. See:                                  
         https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples (Rule LD005)              

Linter results for project: 2 ERRORS, 2 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @bheesma-10
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[AvinasheeTech]

@ArduinoBot

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

A problem was found with your submission https://github.com/bheesma-10/mcp23017-arduino

❌ ERROR: Submission URL is already in the Library Manager index.

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/bheesma-10/MCP23008_I2C:

Linting library in MCP23008_I2C
ERROR: Path does not contain a valid Arduino library. See:                                                              
       https://arduino.github.io/arduino-cli/latest/library-specification (Rule LS001)                                  
INFO: No header file found matching library name (MCP23008_I2C.h). Best practices are for primary header filename to    
      match library name. (Rule LS008)                                                                                  
ERROR: Incorrect src folder name case: MCP23008_I2C/Src. This will cause                                                
       the library to not be recognized on case-sensitive file systems. See:                                            
       https://arduino.github.io/arduino-cli/latest/library-specification/#library-root-folder (Rule LS009)             
WARNING: No example sketches found. Please provide examples. See:                                                       
         https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples (Rule LD004)              
WARNING: Potentially misspelled examples folder name found: MCP23008_I2C/example. See:                                  
         https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples (Rule LD005)              

Linter results for project: 2 ERRORS, 2 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @bheesma-10
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[AvinasheeTech]

@ArduinoBot

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

A problem was found with your submission https://github.com/bheesma-10/mcp23017-arduino

❌ ERROR: Submission URL is already in the Library Manager index.

[github-actions]

Arduino Lint has suggestions for possible improvements to https://github.com/bheesma-10/MCP23008_I2C:

Linting library in MCP23008_I2C
WARNING: No example sketches found. Please provide examples. See:                                                       
         https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples (Rule LD004)              

Linter results for project: 0 ERRORS, 1 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @bheesma-10
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[AvinasheeTech]

@ArduinoBot

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

A problem was found with your submission https://github.com/bheesma-10/mcp23017-arduino

❌ ERROR: Submission URL is already in the Library Manager index.

[github-actions]

Arduino Lint has suggestions for possible improvements to https://github.com/bheesma-10/MCP23008_I2C:

Linting library in MCP23008_I2C
WARNING: No example sketches found. Please provide examples. See:                                                       
         https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples (Rule LD004)              

Linter results for project: 0 ERRORS, 1 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @bheesma-10
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[AvinasheeTech]

@ArduinoBot

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

A problem was found with your submission https://github.com/bheesma-10/mcp23017-arduino

❌ ERROR: Submission URL is already in the Library Manager index.

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @bheesma-10
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[github-actions]

Your submission has now been accepted! Thanks for your contribution to the Arduino Library Manager index.

The library(s) will be available for installation via Library Manager within a day's time.

You can check the logs from the Library Manager indexer for your library(s) here:
http://downloads.arduino.cc/libraries/logs/github.com/bheesma-10/MCP23008_I2C/