Add RAKwireless Autumn Launch Module libraries

[beegee-tokyo]

No description provided.

[github-actions]

Arduino Lint has suggestions for possible improvements to https://github.com/RAKWireless/RAK13010-SDI12:

Linting library in RAK13010-SDI12
INFO: No header file found matching library name (RAKwireless_SDI-12.h). Best practices are for primary header filename 
      to match library name.                                                                                            
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
WARNING: library.properties name value RAKwireless_SDI-12 is longer than the recommended length of 16 characters.
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format  
         (Rule LP010)                                                                                            
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy  
         is not needed.                                                                                                 
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP036)                                                                                                   

Linter results for project: 0 ERRORS, 2 WARNINGS

-------------------

Linting sketch in RAK13010-SDI12/examples/RAK13010_SDI_12_Address_Change

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13010-SDI12/examples/RAK13010_SDI_12_Basic_Data_Request

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13010-SDI12/examples/RAK13010_SDI_12_Check_All_Addresses

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13010-SDI12/examples/RAK13010_SDI_12_Concurrent_Logger

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13010-SDI12/examples/RAK13010_SDI_12_Interface

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13010-SDI12/examples/RAK13010_SDI_12_Slave

Linter results for project: no errors or warnings

-------------------

Linter results for projects: 0 ERRORS, 2 WARNINGS

[github-actions]

Arduino Lint has suggestions for possible improvements to https://github.com/RAKWireless/RAK13006-MCP2518:

Linting library in RAK13006-MCP2518
INFO: No header file found matching library name (RAK13006-MCP2518_library.h). Best practices are for primary header    
      filename to match library name.                                                                                   
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
WARNING: library.properties name value RAK13006-MCP2518 library is longer than the recommended length of 16 characters.
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format        
         (Rule LP010)                                                                                                  
WARNING: library.properties name RAK13006-MCP2518 library contains spaces. Although supported, best practices is to not 
         use spaces.                                                                                                    
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP015)                                                                                                   
WARNING: Library name RAK13006-MCP2518 library contains "library". This is superfluous.                        
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP016)                                                                                          
WARNING: The library.properties paragraph field repeats the sentence field. These are displayed together so redundancy  
         is not needed.                                                                                                 
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP036)                                                                                                   

Linter results for project: 0 ERRORS, 4 WARNINGS

-------------------

Linting sketch in RAK13006-MCP2518/examples/RAK13006_CAN_LoopBack

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13006-MCP2518/examples/RAK13006_CAN_Master

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13006-MCP2518/examples/RAK13006_CAN_Slave

Linter results for project: no errors or warnings

-------------------

Linter results for projects: 0 ERRORS, 4 WARNINGS

[github-actions]

Arduino Lint has suggestions for possible improvements to https://github.com/RAKWireless/RAK13801_UWB:

Linting library in RAK13801_UWB
INFO: No header file found matching library name (RAK13801_UWB.h). Best practices are for primary header filename to    
      match library name.                                                                                               
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
WARNING: Potentially misspelled extras folder name found: RAK13801_UWB/extra                         
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#extra-documentation
         (Rule LS011)                                                                                
WARNING: Invalid category field value Wireless in library.properties                                           
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP038)                                                                                          

Linter results for project: 0 ERRORS, 2 WARNINGS

-------------------

Linting sketch in RAK13801_UWB/examples/BasicConnectivityTest

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/BasicReceiver

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/BasicSender

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/SimpleAntennaCalibration

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/StandardRTLSAnchorB_TWR

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/StandardRTLSAnchorC_TWR

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/StandardRTLSAnchorMain_TWR

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/StandardRTLSTag_TWR

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/StandardRTLSTag_TWR_1

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/TwoWayRangingInitiator

Linter results for project: no errors or warnings

-------------------

Linting sketch in RAK13801_UWB/examples/TwoWayRangingResponder

Linter results for project: no errors or warnings

-------------------

Linter results for projects: 0 ERRORS, 2 WARNINGS

[github-actions]

Arduino Lint has suggestions for possible improvements to https://github.com/RAKWireless/RAK12039-PMSA003I:

Linting library in RAK12039-PMSA003I
INFO: No header file found matching library name (RAK12039_PM_Sensor.h). Best practices are for primary header filename 
      to match library name.                                                                                            
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
WARNING: library.properties name value RAK12039_PM_Sensor is longer than the recommended length of 16 characters.
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format  
         (Rule LP010)                                                                                            

Linter results for project: 0 ERRORS, 1 WARNINGS

-------------------

Linting sketch in RAK12039-PMSA003I/examples/RAK12039_Dust_Read_PMSA003I

Linter results for project: no errors or warnings

-------------------

Linter results for projects: 0 ERRORS, 1 WARNINGS

[github-actions]

Your submission has now been accepted! Thanks for your contribution to the Arduino Library Manager index.

The library(s) will be available for installation via Library Manager within a day's time.

You can check the logs from the Library Manager indexer for your library(s) here:
http://downloads.arduino.cc/libraries/logs/github.com/RAKWireless/RAK12039-PMSA003I/
http://downloads.arduino.cc/libraries/logs/github.com/RAKWireless/RAK13006-MCP2518/
http://downloads.arduino.cc/libraries/logs/github.com/RAKWireless/RAK13010-SDI12/
http://downloads.arduino.cc/libraries/logs/github.com/RAKWireless/RAK13801_UWB/