sync master branch #9
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
* Add LME49600 high current audio buffer * Fix V- pin type and symbol description * Remove datasheet link from .lib file
* New part MQ-6
* Addition of symbol for APA-106-F5 5mm Addressable RGB LED * Fixed issue with footprint filter * Missed * in footprint filter * Fixed Pin names & footprint filter as requested * Fixed error where I accidentally deleted APA102...
* Adding TLV755xxPDRV, TLV757xxPDRV * Fixed alias lines for TLV70012_SOT23-5 * Revert "Fixed alias lines for TLV70012_SOT23-5" This reverts commit 1742f3c. * Fix aliases * Fix alias * Filter fixed. Pinout fixed. Pad 7 added. Description fixed
* Add the MCP2210 USB-to-SPI Converter * Remove EP pins from SOIC/SSOP variants These don't have an exposed pad, of course * Separate keywords with spaces, not commas * Use wildcard for the temperature range * Move pad to bottom and make passive * Move SPI to other side, shrink the symbol * Remove - before the symbol name wildcard * Fix symbol descriptions * Adjust footprint filter and EP pin name * Reorganize pins * Move text just above the symbol outline * Reorganize pins * Swap Vusb and Vdd, make Vusb passive
* Add SG5032/SG7050 Oscillators * Change SG-5032CCN to be an alias of SG-8002LB * Change SG-7050CCN to be an alias of SG-8002CA * Add frequency ranges to oscillator descriptions
* Added ld1086 * Removed accidental symbol * Fixed filter * Fixed line thickness * Fixed symbols and created aliases * Removed footprint on ld1086v-dg * Added a '6' * Changed pin8 to passive * Changed datasheet link * Readded footprint * Replaced '?' with '*' where appropriate * Fixed FP filter for DFN8
* Adding LM810/LM809, Microprocessor reset circuits * Fixing travis violation * Pin length to 100mil and modified the description
* Fix SG-8002LB pinname Pin4 is called Vcc, not V+ * Fix more pins and datasheets
* Adding JK0654219NL * Pin lenght, body border, pin offset
Update datasheet links for MCU_Microchip_SAME parts
Fix Lattice ICE40HX4K-TQ144 VCC_SPI pin direction
As noted in Issue#2264, Minicircuits RF tranformer descriptions did not match datasheet values.
* Fixed pin name position offset for SAM E/L parts * Fixed ATSAML21G16B-AUT footprint filter * Fixed ATSAML21G16B-AUT power pin stacking * Fixed off-center symbol for ATSAME54N19A-A
* Improve some sensor keywords and descriptions Modified the descriptions/keywords for: - BME280 - BME680 - AS3935 * Further improve descriptions Reorder wording, comma-separate.
…tion. (#2273) * Added SiSS27DN transistor, based on already existing Sis415DNT definition. * Make SiSS27DN an alias of SiS415DNT
* Add two TI comparators in a SOT-23 package: * TLV7031 push-pull * TLV7041 open-drain They feature: * 315 nA quiescent supply current * 2 pA input bias current * 3 us propagation delay * Output voltage within 50 mV of the rail when I_out <= 1 mA * 2-17 mV hysteresis * Fix TI TLV7041 datasheet link per #2277 (comment) * Add DBV suffix to symbol name to denote TI's name for SOT-23 package
* added AS13704 * fix datasheet problem * add nc pins, moved symbol info and datasheet down
* Added RJ45 Abracon ARJP11A-MASA-B-A-EMU2 symbol * Added RJ45 Abracon ARJP11A-MASA-B-A-EMU2 symbol Changed text position. * RJ45 Abracon ARJP11A-MASA-B-A-EMU2 Small changes in symbol look (LEDs, rectifiers). * RJ45 Abracon ARJP11A-MASA-B-A-EMU2 Moved symbol from Transformer to Connector library. * RJ45 Abracon ARJP11A-MASA-B-A-EMU2 Changed name co it contains connector type and manafacturer. * RJ45 Abracon ARJP11A-MASA-B-A-EMU2 Changed designator to J. * RJ45 Abracon ARJP11A-MASA-B-A-EMU2 Changed footprint and footprint filter.
* Clean up Arduino modules * Change GPIO pins back to Bidirectional
* Add Potentiometer AD5254 * Update resistor style for AD5254 * Change GND to DGND on AD5254 * ADD TSSOP-20 to description of AD5254 * Put all pins for resister to right side on AD5254 * Add alias to AD5254 about AD5253
* Add LM2931 low-drop voltage regulator in TO220 package * Made LM2931 as alias for LM7805
* add Murata NXE1S Series devices * change footprint reference in NXE1S and NXE2S * add NXE1SxxxxMC types as aliases to NXE2S0505MC component * removed empty line in CMP NXE1S0505MC
* Add MAXIM DS1210Nonvolatile Controller Chip * Add Maxim DS1210 Nonvolatile Controller Chip * Add footprint filter * Add Keywords * Proposed fix for #961 * #961 Rework filter * #961 Fixups * #961 Fixups #2 * DS1210 Fixup pin name offsets * AS4CM16SA Fixups * Re-add AS4C4M16SA footprint fixups * Update 628512 Change hidden power pins to normal to facilitate connection of backup power to VCC pins * Revert unrelated symbol changes As per request chschlue #1954
* Add ABx8x5 RTCs * Change XO pin to Output type * Changed FP filter *QFN to VQFN * Fix EXTI pin name
* Add LM329 * Update FP filter
* Added UCC27714 * NC pins to the border * New Name UCC27714D * New Description * Changed Footprintfilter
* Added LM5161PWP Datasheet: http://www.ti.com/lit/ds/symlink/lm5161.pdf#page=34 Footprint: KiCad/kicad-footprints#2144 * Changed VCC pin type to power output * Include footprint in description, changed footprint filter and added NC pins. * Changed NC pin type to don't connect * Fix positions of NC pins
* Added ADS1220IPW and ADS1220IPWR * Fix pin offset * Changed alias to ADS1220xPX * Fix name
* Added UCCx895 * Added UCCx895 * Created for each footprint a symbol * Changed footprint filter * Changed same footprint into aliases * Chenged footprint and pin types
* Adding STULPI01a, STULPI01b * Fix Travis errors * Footprint filter fixed. STP, NXT, RREF, 3V3V, 1V2V types fixed. Alias datasheet fixed
* Adding TFP410 * Port order fixed * Fix name, pin length, footprint filter, offset, description. PAD renamed to EP. DSEL/SDA type changed. Power pins aligned. Height decreased
* Interface USB: CY7C65215, fix pin 20 name and position * Revert "Interface USB: CY7C65215, fix pin 20 name and position" This reverts commit e0a31ad. * Revert "Interface USB: CY7C65215, fix pin 20 name and position" This reverts commit e0a31ad. * Interface USB: CY7C65215, fix pin 20 name and position * Revert "Interface USB: CY7C65215, fix pin 20 name and position" This reverts commit e0a31ad. * CONNECTOR: Add MP pin to bus mini-pcie symbol * Fix of unexpected change * MINI PCIE: Update pin name
* Addition of LM3150 Buck Converter Controller * Moved HG & BST pins for cleaner schematic * - Rearranged pins - corrected Pin lengths - updated package description * Fixed Pin Offset Changed name of Thermal pad to SGND to comply with KLC S4.3
* Add more generic ground symbols * Fix pin names
* Adding 5P49V6965 * Cosmetic, squeze. * Pin offset and length changed. Footprint changed (EP)
* Adding TPD4E02B04 * Reworked * Travis error fix * Avoiding Travis error * Pin 3 type changed to passive. Try to squeeze. * Another small variant * Back to old variant
* Adding CBTL02043A, CBTL02043B * Fix outline width * Small functional diagram changes * Pin length and offset changed
* Adding SN74LVC1G14 in SOT-23 and SC70 packages * Footprint filters fixed
* Add AD654 * Fix +VS pin number to 8
Signed-off-by: Dominik Sliwa <dominik@e-plum.pl>
* Adding TPS6282xDLC * SW pin type fix. Footprint and filter fix
* USB334x - Enhanced Single Supply Hi-Speed USB ULPI Transceiver * Add missing meta information. * USB334x: Reshaped, various fixes.
* added TPS54061 * changed fp filter * updated fp regarding feedback * removed redundant fp * fixed pin 9 naming * fixed pin 9 type Co-authored-by: Rico <rs-development@users.noreply.github.com>
* New symbol MJG2DxxxxxxSC * changes description, footprint filter, position of label * changes footprint entry * changed footprint link again * repairs last merge. Reverts two deletions * corrects datasheet link * Change according comment: name, more aliases, Keyword DC/DC converter additional: add more detailed description to each alias Vin Vout
- Add DIP FP filter to 74HC164 - Add missing NC pin to 74LS280
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.