Skip to content

Releases: billwolfhub/plooper

Release list

Plooper v0.1.1

Plooper v0.1.1 Latest
Latest

Choose a tag to compare

View all tags
@billwolfhub billwolfhub released this 26 Sep 19:42
v0.1.1
bbb3002

A small update to v0.1.0: Plooper can now show how hard it's working the Daisy.

What's new

  • CPU load item in SETUP (read-only): the audio callback's average load, the peak over the last second, and the highest peak since power-up, e.g. 48% pk51 mx61. Click it to reset the highest peak. It isn't saved with the settings.
  • More comments in the source explaining the architecture and algorithms.

Saved SETUP settings from v0.1.0 carry over.

Installing

Plooper-v0.1.1.bin is built for the Daisy bootloader (APP_TYPE = BOOT_SRAM), so the Patch needs the Daisy bootloader v6.4 installed first. Install it once from the Bootloader tab at flash.daisy.audio (choose v6.4).

Then flash Plooper: tap RESET, press BOOT while the Seed's LED is slowly pulsing, and run:

dfu-util -a 0 -s 0x90040000:leave -D Plooper-v0.1.1.bin -d ,0483:df11

Don't flash this file to internal flash (0x08000000): that would overwrite the bootloader, and Plooper won't run from there.

Build details

  • Source: bbb3002
  • libDaisy v8.1.0-20-gfacb66c7, DaisySP 599511b, DaisySP-LGPL c89d380
  • arm-none-eabi-gcc 10.3 (Daisy Toolchain)
  • SHA-256: 883fae2170b96509aa8d4f3656bfaf0a152a364cfbffb8317513a77b6f898199
Assets 3
Loading

Plooper v0.1.0

Plooper v0.1.0

Choose a tag to compare

View all tags
@billwolfhub billwolfhub released this 26 Sep 01:01
v0.1.0
e78d186

First release of Plooper, a four-playhead looper with strange reverbs and tape-style fading for the Electrosmith Daisy Patch. See the README for controls.

Highlights

  • Up to 60 s stereo loop; press the encoder to start and close the first take (sample-accurate loop length)
  • Four playheads (A–D) with their own level, speed (reverse below centre), start, window length, direction, and pan
  • Punch in by holding the encoder; hold past 2 loops to latch overdub; GATE IN 1 / GATE IN 2 control too
  • Six reverbs: Plate, Shimmer, Sub, Backwards, Ghost, Freeze
  • Tape section for Frippertronics: dub fade, decay, age, wow
  • INPUT page mixing IN 1–4 into the loop

Installing

Plooper-v0.1.0.bin is built for the Daisy bootloader (APP_TYPE = BOOT_SRAM), so the Patch needs the Daisy bootloader v6.4 installed first. Install it once from the Bootloader tab at flash.daisy.audio (choose v6.4).

Then flash Plooper: tap RESET, press BOOT while the Seed's LED is slowly pulsing, and run:

dfu-util -a 0 -s 0x90040000:leave -D Plooper-v0.1.0.bin -d ,0483:df11

Don't flash this file to internal flash (0x08000000): that would overwrite the bootloader, and Plooper won't run from there.

Build details

  • Source: e78d186
  • libDaisy v8.1.0-20-gfacb66c7, DaisySP 599511b, DaisySP-LGPL c89d380
  • arm-none-eabi-gcc 10.3 (Daisy Toolchain)
  • SHA-256: ed3751f6ef317bb6f27e0b5174fc499b59b4ca6fe0520dd87e27fcc56b36369c
Loading