Repository navigation
Frigate stops with Hailo8l after about 10 sec #24962
Replies: 8 comments
|
Two separate problems are visible in the log, and both need fixing. 1. Your
|
|
I've now adjusted the configuration, but unfortunately Frigate still stops after 10 seconds. According to the instructions, it should automatically download any missing components, but I can't find coco-80.txt. |
|
The new error is a simple typo in your config, not a missing file. The traceback shows Frigate tried to open:
The Fix the labelmap line so the model block reads: The detector itself automatically downloads the default model (YOLOv6n) from the Hailo Model Zoo on first startup and caches it under Once Frigate starts past config validation, watch for the earlier 📚 Sources: Have another question? Just tag @inkeep. |
|
I adjusted the configuration exactly as instructed. Unfortunately, the result is still the same. After about 10 seconds, the frigate stops. |
|
Your dmesg output shows the driver loaded, firmware installed, and For the Hailo-8, Docker must be granted permission to access the hardware by passing the device into the container (1): With Since you're running the Home Assistant App rather than your own Docker container, you don't control that device mapping yourself — the App must pass Two other things worth verifying from the installation steps, both of which affect whether the device can be opened successfully (1):
Your dmesg line 📚 Sources: Have another question? Just tag @inkeep. |
|
As I've already mentioned, Frigate runs directly in Home Assistant without Docker |
|
I'm closing this ticket; I found the problem. In HomeAssist, I disabled safe mode for Frigate. Now it's working. |

Uh oh!
There was an error while loading. Please reload this page.
Describe the problem you are having
I installed Frigate directly in HomeAssist. The Hailo8L card is recognized by HomeAssist. When I start Frigate, I can see that the Hailo8 is recognized and that the temperature and interference are displayed in Frigate, but then it stops with an error in the log.
Version
0.18.2 Full Access
Frigate config file
docker-compose file or Docker CLI command
no DockerRelevant Frigate log output
Install method
Home Assistant App
Object Detector
Other
Screenshots of the Frigate UI's System metrics pages
Any other information that may be helpful
Frigate ist installd under:
Home Assistant OS
Core
2026.11.1
Supervisor
2026.11.0
Operating System
18.4
Frontend
20261028.5
In Frigate, an image from the camera is also displayed for about 10 seconds.
All reactions