Lightning Vault

Lightning Vault is a secure secrets solution for storing lightning node authentication tokens in AWS environment. Purpose of this is to limit the fallout of potential credential leak or security incident and apply rolling credential principles to lightning network infrastructure.

By design original secret can never be retrieved, you can only request a time-restricted version of it from the service. This way your applications can interact with your nodes but always use expiring credentials.

Supports LND (macaroons) and CoreLightning (runes).

Requirements

IAM permissions:

The service uses AWS SecretsManager internally for storing the original secret. It needs following IAM permissions:

{
  "Action": "secretsmanager:ListSecrets",
  "Effect": "Allow",
  "Resource": "*"
},
{
  "Action": [
    "secretsmanager:GetResourcePolicy",
    "secretsmanager:GetSecretValue",
    "secretsmanager:DescribeSecret",
    "secretsmanager:ListSecretVersionIds",
    "secretsmanager:PutSecret",
    "secretsmanager:UpdateSecret",
    "secretsmanager:CreateSecret"
  ],
  "Effect": "Allow",
  "Resource": [
      "arn:aws:secretsmanager:us-east-1:123456789012:secret:stagingmacaroon_*"
  ]
}

(Note that it needs to list all secrets, but you can restrict read and write access to only vault specific secrets.) Name of the secret will always start with "macaroon_". ARN from the example arn:aws:secretsmanager:us-east-1:123456789012:secret:stagingmacaroon_* includes region (us-east-1) and account id (123456789012) which you need to customize for your needs. The part after the last colon (stagingmacaroon_*) means all secrets with names starting with stagingmacaroon_.

Vault will know the current environment through ENV environment variable. It can be any alphanumeric string. There is just one special value local. On local environment Vault will store secrets only in memory and not persist them to SecretsManager.

The most convenient option is to use IAM Instance Profiles but you could also create an IAM user and then add access keys (AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY environment variables).

Configuration

Vault is configured through environment variables.

Variable	Description
ENV	env name with which all stored credentials are starting
READ_API_KEY_1D	list of users that can request credentials valid for 24h
READ_API_KEY_1H	list of users that can request credentials valid for 1h
READ_API_KEY_10M	list of users that can request credentials valid for 1h
WRITE_API_KEY	list of users that can input new credentials

For examples check Usage

Authentication to Vault

There are multiple authentecation options your applications and services can use to access Lightning Vault.

HTTP Basic Auth

They authenticate through HTTP Basic authentication with a username and password. Since credentials are transmitted in clear-text, you need a secure transport channel. Lightning Vault itself does not terminate TLS connections, it is meant to be behind a load-balancer or reverse proxy that handles that.

AWS Presigned Requests

Another authentication is X-Amazon-Presigned-GetCalleridentity HTTP header. This way callers locally sign a request for Amazon STS service and Lightning Vault then takes this serialized request and executes it on behalf of the requestor. If it succeeds that proves their identity. Read more about AWS Signed Requests authentication method here.

The "username" Vault infers via this method is complete ARN. For example: arn:aws:sts::123456789012:assumed-role/some-machine-role/i-xxxxxxxxxxxxxxxxx if you used IAM instance profile

or:

arn:aws:sts::123456789012:assumed-role/role/user if you were using AWS SSO.

With this authentication option a wildcard match against username is performed. Setting username to arn:aws:sts::123456789012:assumed-role/some-machine-role/* will grant permissions to any instance using some-machine-role.

Caller just provides X-Amazon-Presigned-Getcalleridentity value and no username or password (request should not even include HTTP Authorization header).

In the configuration instead of a password you use a special placeholder value $iam. It is chosen in such a way that it is is invalid as a password for any other method. This prevents somebody authenticating via HTTP Basic authentication with literal username arn:aws:sts::123456789012:assumed-role/some-machine-role/* if at some time this entry got interpreted as a username and password.

Access Roles

There are 4 different permission levels ("roles") which are also configured through enviroment variables:

• READ_API_KEY_10M can obtain secrets valid for 10 minutes
• READ_API_KEY_1H can obtain secrets valid for 1 hour
• READ_API_KEY_1D can obtain secrets valid for 1 day
• WRITE_API_KEY can write (or overwrite and thus effectively invalidate) stored secrets

each entry (value of the environment variable) is a list of users seperated with a comma. Roles READ_API_KEY_10M, READ_API_KEY_1H and READ_API_KEY_1D are mutually exclusive. So if you have user user1 in READ_API_KEY_10M user1 must not be in READ_API_KEY_1D too for instance.

An entry has 3 possible authentication ways:

• user|pass - you can authenticate via HTTP Basic authentication with username user and password pass

• user|$2a$... - you can authenticate via HTTP Basic authentication with username user and the password that has one-way hash $2a$... (bcrypt) This methods allows you to leave configuration in plain-text and not leak credentials.

• glob|$iam - you can authenticate via IAM authentication, you need to set X-Amazon-Presigned-Getcalleridentity HTTP header to the presigned query string for STS/GetCallerIdentity call. Glob can contain wildcards ? (meaning any one character) and * (meaning zero or more characters) and is matched against complete ARN of the identity from GetCallerIdentity.

Deployment

Vault is meant to be deployed as a standalne service with priviledged access to SecretManager. Your applications should have limited API access to Vault through API.

API

Vault supports following operations:

• Adding a macaroon or rune

  This is done with HTTP POST request to /put/ endpoint. Another request to same endpoint will overwrite previously stored data. Initial creation of a macaroon returns HTTP 201 (Created) response while subsequent (over)writes will return HTTP 200. For this operation write permissions are required. As described later this includes the verification part which will actually try to connect to the lightning node (so endpoint needs to be reachable from Vault).

  JSON payload looks like this:

  {
    "pubkey": "0367fa307a6e0ce29efadc4f7c4d1109ee689aa1e7bd442afd7270919f9e28c3b7",
    "macaroon_hex": "...",
    "certificate_base64": "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",
    "endpoint": "127.0.0.1:10009",
  }
  

  pubkey is the public key of the node, macaroon_hex is the serialized version of the macaroon as a hex string (you can obtain it using xxd -p -c 10000 file.macaroon), certificate_base64 is the X.509 certificate as a base64 string (obtained using base64 tls.cert | tr -d "\n"and endpoint is the endpoint of the lightning node.

  When adding a rune the name of the field is still macaroon_hex. The value is base64 encoded rune which you can get using lightning-cli commando-rune restrictions=readonly (copy rune). Field endpoint should be the lightning port (e.g., 127.0.0.1:9735) and certificate_base64 can be omitted.

• Removing a macaroon/rune

  Is done using HTTP POST request to /delete/:pubkey/ endpoint. This operation also requires write permissions.

• Getting a restricted macaroon/run (this is the typical mode of operation)

  Is obtained through /get/:pubkey/ HTTP GET request. The restriction depends on your role/permissions and can be either 10 minutes, 1 hour or 1 day (which means you need read permissions).

• Verifying whether a macaroon/rune works

  Is done automatically while adding a macaroon/rune (unless you have VERIFY environment variable set to false) but you can invoke that step independently too using /verify/:pubkey/ HTTP GET method. Similar to adding a macaroon/rune this requires write permissions. Note that this can be quite slow as Vault will actually try to connect to your lightning node.

• Querying whether a macaroon exists

  This can be invoked by any authorized user using /query/:pubkey/ HTTP GET request. The difference between getting a (restricted) macaroon and this method is that no data about the macaroon itself will be returned, just the fact whether a macaroon for that public key is stored in Vault or not. Using this method a user who has write but no read permissions can check whether data for a specific node already exists (and for instance decide to not overwrite it).

  (In the HTTP URLs :pubkey means the actual public key like 0367fa307a6e0ce29efadc4f7c4d1109ee689aa1e7bd442afd7270919f9e28c3b7)

Examples

Python example utilizing boto3 library can be found here example_auth.py. Go example can be found in main.go.

Usage

export ENV=production
export READ_API_KEY_10M=user1|pass1,user33|pass33
export READ_API_KEY_1H=user2|pass2,user22|pass22
export READ_API_KEY_1D=user3|pass3,user11|pass11
export WRITE_API_KEY=user33|pass33,user22|pass22,user1|pass1
$ ./vault -logtostderr

$ cat some.secret
{
  "pubkey": "0367fa307a6e0ce29efadc4f7c4d1109ee689aa1e7bd442afd7270919f9e28c3b7",
  "macaroon_hex": "...",
  "certificate_base64": "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",
  "endpoint": "127.0.0.1:10009",
}
curl -Lvvv -X POST -u write -d@some.secret $MACAROON_STORAGE_URL/put

curl -Lvvv -u read $MACAROON_STORAGE_URL/get/0367fa307a6e0ce29efadc4f7c4d1109ee689aa1e7bd442afd7270919f9e28c3b7