A PCB that holds a PiPico configured with PicoDebug and a second board to be programmed. The PCB is laid out to use 2 x EDAC Clipzin 299-020-299-198 connectors to hold the second board by it’s castellated edges, acting as a ZIF socket. The PCB was sent off to PCBWay with no special settings, standard PCB, etc.
Currently there is nothing on the board to indicate connector orientations to the end user, so take care connecting the +5V and GND, and to a lesser degree the DEBUG header.
A rough BOM for the board, not including the case
| Part# | Qty | Description | Source |
|---|---|---|---|
| 299-020-299-198 | 2 | EDAC Clipzin 20 pin edge connectors | Newark |
| 2 | 0.1” - 20 female pin headers | ||
| 1 | 0.1” - 3 male pin headers | ||
| 1 | 0.1” - 2 male pin headers | ||
| 1 | 5.5 x 2.1 MM 10A DC Power Jack Socket with Cable & Dc Barrel Jack Plug | Amazon | |
| 1 | Facmogu 2 Pack DC 5V 2A Power Adapter, AC 100-240V to DC 5V 2A 10W, 5.5 x 2 | Amazon |