Mozzi

sound synthesis library for Arduino

Tim Barrass

Currently your Arduino can only beep like a microwave oven. Mozzi brings your Arduino to life by allowing it to produce much more complex and interesting growls, sweeps and chorusing atmospherics. These sounds can be quickly and easily constructed from familiar synthesis units like oscillators, delays, filters and envelopes.

You can use Mozzi to generate algorithmic music for an installation or performance, or make interactive sonifications of sensors, on a small, modular and super cheap Arduino, without the need for additional shields, message passing or external synths.

---

Features

• 16384 Hz sample rate, or experimental 32768 Hz rate.
• 8 bit or 14 bit audio output modes.
• Variable control rate from 64 Hz upwards.
• Useful basic audio toolkit: oscillators, samples, lines, envelopes, scheduling, filtering.
• Fast ADC and other cpu-efficient code utilities to help keep audio running smoothly.
• Example sketches for easy modification.
• Readymade wavetables and a script to convert your own soundfiles for Mozzi.
• Mozzi is designed to be easy to use, open source and extendable.

---

Installation

Download the most recent version of Mozzi from Github. Then, following the instructions from the Arduino libraries guide.

In the Arduino IDE, navigate to Sketch > Import Library. At the top of the drop down list, select the option to Add Library. Navigate to the folder's location and open it. Return to the Sketch > Import Library menu. You should now see the library at the bottom of the drop-down menu. It is ready to be used in your sketch.

---

Quick Start

To hear Mozzi, connect a 3.5mm audio jack with the centre wire to the PWM output on Digital Pin 9 on the Arduino, and the ground to the Ground on the Arduino. Use this as a line out which you can plug into your computer and listen to with a sound program like Audacity. Try some examples from the File > Examples > Mozzi menu.

Below is a list of the Digital Pins used by Mozzi for STANDARD_PLUS mode PWM audio out on different boards. Feedback about others is welcome.

Model	Pin	Tested
Arduino Uno	9	yes
Arduino Duemilanove	9	yes
Arduino Nano	9	yes
Arduino Pro Mini	9	yes
Arduino Leonardo	9	yes
Arduino Mega	11	yes
Freetronics EtherMega	11	yes
Ardweeny	9	yes
Boarduino	9	yes
Teensy	14	-
Teensy2	B5	yes
Teensy2++	B5(25)	yes
Teensy 3.0 3.1 LC 3.2	DAC/D	yes
Teensy 3.4, 3.5	DAC/D	-
Gemma M0	A0	yes
Adafruit Playground Express	Built in Speaker	yes
Sanguino	13	-
STM32duino (see "Hardware specific notes", below)	PB8	yes
ESP8266 see details	GPIO2	yes

For details about HIFI mode, read the Mozzi core module documentation.

---

Using Mozzi

Here's a template for an empty Mozzi sketch:

#include <MozziGuts.h>   // at the top of your sketch

void setup() {
	startMozzi();
}

void updateControl(){
	// your control code
}

int updateAudio(){
	// your audio code which returns an int between -244 and 243
}

void loop() {
	audioHook();
}

There's a detailed example explaining the different parts here.

---

Documentation

There's documentation in the doc folder in the Mozzi download and online.
There is practical help on the learn page on the Mozzi site.
Start or look up a topic on the users forum.
Also, feel free to submit any issues on the GitHub Mozzi site.
Look for code and usage changes here.

---

Caveats and Workarounds

AVR

• While Mozzi is running, calling delay(), delayMicroseconds(), or other functions which wait or cycle through loops can cause audio glitches. Mozzi provides EventDelay() for scheduling instead of delay.

• analogRead() is replaced by mozziAnalogRead(), which works in the background instead of blocking the processor.

• Mozzi interferes with analogWrite(). In STANDARD and STANDARD_PLUS audio modes, Mozzi takes over Timer1 (pins 9 and 10), but you can use the Timer2 pins, 3 and 11 (your board may differ). In HIFI mode, Mozzi uses Timer1 (or Timer4 on some boards), and Timer2, so pins 3 and 11 are also out.
  If you need analogWrite(), you can do PWM output on any digital pins using the technique in Mozzi>examples>11.Communication>Sinewave_PWM_pins_HIFI.

• Mozzi providesmozziMicros() as an alternative to 'millis()' and 'micros()'.

Last Resort

The timers can be made available with stopMozzi(), which stops audio interrupts, until you call startMozzi().

---

Tweaking Arduino for Faster Audio Code

If you need your synth to run faster on AVR architectures, Arduino versions above 1.5 can be tweaked to optimise compiled code for speed instead of small size.

Find Arduino’s platform.txt (on OSX you can find it by searching in Users/your_name/Library/Arduino15). Search and replace -Os with -O2. Save.

It’s explained more thoroughly (for Windows) [here] (http://www.instructables.com/id/Arduino-IDE-16x-compiler-optimisations-faster-code/?ALLSTEPS).

If you still need more speed, Arduino 1.0.5 produces slightly faster code.

---

If you enjoy using Mozzi for a project, or have extended it, we would be pleased to hear about it and provide support wherever possible. Contribute suggestions, improvements and bug fixes to the Mozzi wiki on Github, or Fork it to contribute directly to future developments.

Mozzi is a development of research into Mobile Sonification in the SweatSonics project.

---

Contributions / Included Dependencies

Modified versions of the following libraries are included in the Mozzi download:

TimerOne library
FrequencyTimer2 library - now a fork with support for ATmega32u4 processors

Mozzi has also drawn on and been influenced by (among many others):

[xorshift] (http://www.jstatsoft.org/v08/i14/xorshift.pdf) random number generator, George Marsaglia, (2003)
ead~.c puredata external (creb library) Copyright (c) 2000-2003 by Tom Schouten (GPL2)
AF_precision_synthesis by Adrian Freed, 2009
Resonant filter posted to musicdsp.org by Paul Kellett, and fixed point version of the filter on [dave's blog of art and programming] (http://www.pawfal.org/dave/blog/2011/09/)
State Variable filter pseudocode at [musicdsp.org] (http://www.musicdsp.org/showone.php?id=23 and http://www.musicdsp.org/showone.php?id=142)
Various examples from Pure Data by Miller Puckette
Practical synthesis tutorials by Andy Farnell

Hardware specific notes

STM32(duino)

port by Thomas Friedrichsmeier

Compiles for and runs on a STM32F103C8T6 blue pill board, with a bunch of caveats (see below), i.e. on a board without a real DAC. Should probably run on any other board supported by STM32duino.

• You will need a very recent (12/2017) checkout of the Arduino_STM32 repository, otherwise compilation will fail.
• Audio output is to pin PB8, by default (HIFI-mode: PB8 and PB9)
• If you want to use MIDI, be sure to replace "MIDI_CREATE_DEFAULT_INSTANCE()" with "MIDI_CREATE_INSTANCE(HardwareSerial, Serial1, MIDI)" (or Serial2)
• Timers 4 (PWM output), and 2 (audio rate) are used by default.
• The STM32-specific options (pins, timers) can be configured in AudioConfigSTM32.h
• Default audio resolution is currently set to 10 bits, which yields 70khZ PWM frequency on a 72MHz CPU. HIFI mode is 2*7bits at up to 560Khz (but limited to 5 times audio rate)
• HIFI_MODE did not get much testing
• STEREO_HACK not yet implemented (although that should not be too hard to do)
• AUDIO_INPUT is completely untested (but implemented in theory)
• Note that AUDIO_INPUT and mozziAnalogRead() return values in the STM32's full ADC resolution of 0-4095 rather than AVR's 0-1023.
• twi_nonblock is not ported

Teensy 3.0/3.1/3.2/3.4/3.5/LC

Extra libraries required for use withTeensy 3.*: These are included in the standard Teensyduino install unless you explicitly disable them

• Timer library for Teensy 3.* by Daniel Gilbert
• ADC library by Pedro Villanueva

Some of the differences for Teensy 3.0# which will affect users include:

• On Teeensy 3.0/3.1/3.2/Audio output is on pin A14/DAC, in STANDARD or STANDARD_PLUS audio modes. These modes are identical on Teensy 3.0/3.1/3.2, as the output is via DAC rather than PWM.
• Output is 12 bits in STANDARD and STANDARD_PLUS modes, up from nearly 9 bits for Atmel based boards. HIFI audio, which works by summing two output pins, is not available on Teensy 3.0/3.1.
• #include <ADC.h> is required at the top of every Teensy 3 sketch.
• The examples come with this commented out, for Arduino compatibility.
• Serial baud rate for monitoring in the IDE needs to be set to 9600 to work with Teensy 3.0/3.1/3.2. This slow rate can cause audio glitches.
• twi_nonblock code by Marije Baalman for non-blocking I2C is not compatible with Teensy 3.0/3.1/3.2.

ESP8266

port by Thomas Friedrichsmeier

• Since flash memory is not built into the ESP8266, but connected, externally, it is much too slow for keeping wave tables, audio samples, etc. Instead, these are kept in RAM on this platform.
• Asynchronous analog reads are not implemented. mozziAnalogRead() relays to analogRead().
• AUDIO_INPUT is not implemented.
• twi_nonblock is not ported
• Several audio output modes exist, the default being PDM_VIA_SERIAL (configurable in AudioConfigESP.h):
  • PDM_VIA_SERIAL: Output is coded using pulse density modulation, and sent via GPIO2 (Serial1 TX).
    • This output mode uses timer1 for queuing audio sample, so that timer is not available for other uses.
    • Note that this mode has slightly lower effective analog output range than PDM_VIA_I2S, due to start/stop bits being added to the output stream.
  • PDM_VIA_I2S: Output is coded using pulse density modulation, and sent via the I2S pins. The I2S data out pin (which is also "RX") will have the output, but all I2S output pins (RX, GPIO2 and GPIO15) will be affected. Mozzi tries to set GPIO2 and GPIO15 to input mode, and at the time of this writing, this allows I2S output on RX even on boards such as the ESP01 (where GPIO15 is tied to Gnd). However, it seems safest to assume that this mode may not be useable on boards where GPIO2 or GPIO15 are not available as output pins.
  • EXTERNAL_DAC_VIA_I2S: Output is sent to an external DAC (such as a PT8211), digitally coded. This is the only mode that supports STEREO_HACK. It also need the least processing power.
    • TODO: Untested!
• There is no "HIFI_MODE" in addition to the above output options. For high quality output, either use an external DAC, or increase the PDM_RESOLUTION value.
• Note that the ESP8266 pins can output less current than the other supported CPUs. The maximum is 12mA, with a recommendation to stay below 6mA.
  • WHEN CONNECTING A HEADPHONE, DIRECTLY, USE APPROPRIATE CURRENT LIMITING RESISTORS (>= 500Ohms).
• Any WiFi-activity can cause severe spikes in power consumption. This can cause audible "ticking" artifacts, long before any other symptoms.
  • If you do not require WiFi in your sketch, you should turn it off, explicitly, using WiFi.mode(WIFI_OFF).
  • A juicy enough, well regulated power supply, and a stabilizing capacitor between VCC and Gnd can help a lot.
  • As the (PDM) output signal is digital, a single transistor can be used to amplify it to an independent voltage level.
• The audio output resolution is always 16 bits on this platform, internally. Thus, in updateAudio(), you should scale your output samples to a full 16 bit range. The effective number of output bits cannot easily be quantified, due to PDM coding.
• audioHook() calls yield() once for every audio sample generated. Thus, as long as your audio output buffer does not run empty, you should not need any additional yield()s inside loop().