timer 0: Dead time constants missing in core

[navr32]

Hi again . with timer 0 any output and build failed on all mode
if i set the dead time with lgt328

[dbuezas]

Thanks for this one also!
I'll need a bit more infos:

• What arduino core are you using?
• Please configure the timers and copy and paste the app url here

[navr32]

Hello I use the lgt8fx 1.0.6 from dbuezas arduino ide 1.8.10
void setup(){
/* https://dbuezas.github.io/arduino-web-timers/#mcu=LGT8F328P&timer=0&DeadTime=on&OCR0A=51&OCR0B=102&DTR0L=8&DTR0H=8 */
noInterrupts();
TCCR0A =
1 << COM0A0 |
1 << COM0B0 |
1 << WGM00;
TCCR0B =
1 << DTEN0 |
1 << CS00;
OCR0A = 51;
OCR0B = 102;
DTR0L = 8;
DTR0H = 8;
pinMode(9, OUTPUT);
pinMode(10, OUTPUT);
interrupts();
}

void loop() {
// put your main code here, to run repeatedly:

}

---

test:14:3: error: 'DTR0L' was not declared in this scope
DTR0L = 8;

and so and so.. but ok with others timers.

[dbuezas]

Same issue as in #3

[dbuezas]

This should now be fixed in v1.0.7 of the arduino core