Orbit B-hyve component for Home Assistant.
If this integration has been useful to you, please consider chipping in and buying me a coffee!
This integration works with:
The following controllers have been verified as compatible with this integration, either by the author or members of the community. By virtue that this is an unofficial project which is not supported by the company, there is no guarantee of continued compatibility for current or future devices.
- Orbit 21004 B-hyve Smart Hose Faucet Timer with Wi-Fi Hub. The Wifi hub is required to provide the faucet timer with internet connectivity. Bluetooth connectivity with the timer is not supported.
- Orbit 57946 B-hyve Smart Indoor/Outdoor 6-Station WiFi Sprinkler System Controller.
- Orbit 57925 B-hyve Smart 8-Zone Indoor-Mount Sprinkler Controller.
- Orbit 57995 B-hyve XR.
- Orbit B-hyve XD (with the Gen 2 Wifi hub).
Note: The Wifi hub is required to provide the faucet controllers with internet connectivity.
Note: The Wifi hub is required to provide the flood sensors with internet connectivity.
sensorfor measuring battery levels and watering history ofsprinkler_timerdevices as well as the device on/off state (not to be confused with zone on/off switches).temperature sensorfor measuring the temperature at the device.switchfor turning a zone on/off, enabling/disabling rain delays and toggling pre-configured programs.binary_sensorforflood_sensordevices which provide liquid detection and temperature alerts when out of threshold.
Recommended installation is via the Home Assistant Community Store (HACS).
If you do not wish to use HACS, then please download the latest version from the releases page and proceed to Step 2.
- Navigate to the HACS add-on
- Search for the
Orbit B-hyveintegration and install it - Restart Home Assistant
- Navigate to Home Assistant Settings > Devices & Services
- Click
+ Add Integration - Search for
Orbit B-hyve - Complete the guided configuration
Some common errors in set up include:
- Assuming that installing the integration via HACS is all that is required - it still needs to be configured!
- Not restarting Home Assistant after installing the integraion via HACS
A battery sensor entity is created for any device which has a battery level to report.
A device state sensor entity is created for each device. This reports the state of the device, for example auto or off. A device may be switched to off either manually through the B-hyve app, or may be automatically set when battery levels are too low to operate the device correctly.
A zone history sensor entity is created for each zone. This reports the history of zone watering.
The following attributes are set on zone history sensor entities:
| Attribute | Type | Notes |
|---|---|---|
budget |
number |
The watering budget used. |
program |
string |
The program letter which triggered the watering event. |
program_name |
string |
The name of the program which triggered the watering event. |
run_time |
number |
The number of minutes the watering was active. |
status |
string |
The watering status. |
consumption_gallons |
number |
The amount of water consumed, in gallons. |
consumption_litres |
number |
The amount of water consumed, in litres. |
start_time |
string |
The start time of the watering. |
The BHyve flood sensor provides the following binary_sensor entities:
A binary_sensor that turns on if water is detected.
A binary_sensor that turns on if the detected temperature is over or under the set threshold. The threshold values should be set using the BHyve app.
A zone switch entity is created for each zone of a sprinkler_timer device. This switch enables starting/stopping irrigation of a zone. Turning on the switch will enable watering of the zone for the amount of time indicated by the manual_preset_runtime attribute. This amount of time can be set using the set_manual_preset_runtime service or configured in the B-hyve app.
The following attributes are set on zone switch entities:
| Attribute | Type | Notes |
|---|---|---|
zone_name |
string |
The name of the zone |
device_id |
string |
The id of the device which this zone belongs to |
device_name |
string |
The name of the device which this zone belongs to |
manual_preset_runtime |
number |
The number of seconds to run zone watering when switch is turned on. |
smart_watering_enabled |
boolean |
True if the zone has a smart water schedule enabled. |
sprinkler_type |
string |
The configured type of sprinker. |
image_url |
string |
The url to zone image. |
started_watering_station_at |
string |
The timestamp the zone started watering. |
program_x |
object |
Provides details on any configured watering programs for the given switch. |
program_e[watering_program] |
list[string] |
List of timestamps for future/scheduled watering times.† |
† Only applicable if a Smart Watering program is enabled. Any rain delays or other custom programs must be considered separately.
Any watering programs which are configured for a zone switch are made available as an attribute. The X denotes the letter of the program slot. Values A, B and C are well known custom slots. Program E is reserved for the Smart Watering plan. Slot D does not have a known use at this stage.
Please see program switches below for more details.
A rain delay switch entity is created for each discovered sprinkler_timer device. This entity will be on whenever B-hyve reports that a device's watering schedule will be delayed due to weather conditions.
Enabling the switch will set a 24 hour rain delay on the device — for a custom rain delay, please use the enable_rain_delay service.
The following attributes are set on switch.*_rain_delay entities, if the sensor is on:
| Attribute | Type | Notes |
|---|---|---|
cause |
string |
Why a delay was put in place. Values seen: auto. May be empty. |
delay |
number |
The number of hours the delay is in place. NB: This is hours from started_at attribute. |
weather_type |
string |
The reported cause of the weather delay. Values seen: wind, rain. May be empty. |
started_at |
string |
The timestamp the delay was put in place. |
A program switch entity is created for each program attached to each zone. These switches can be switched on or off. They can be configured using the official B-hyve app.
| Attribute | Type | Notes |
|---|---|---|
device_id |
string |
The id of the device which this zone belongs to. |
is_smart_program |
boolean |
True if this is a Smart Watering program. |
start_times |
string |
Configured start time for the program.† |
frequency |
object |
Watering schedule configuration.† |
frequency.type |
string |
Type of configuration. days is the only known value. |
frequency.days |
list[int] |
Configured days for watering. 0 is Sunday, 1 is Monday etc... |
run_times |
list[object] |
Configured watering run times.† |
run_times[].run_time |
int |
Minutes of watering. |
run_times[].station |
int |
Zone id to water. |
† Not available on Smart Watering programs
This integration provides the following services:
| Service | Parameters | Description |
|---|---|---|
bhyve.start_watering |
entity_id - zone(s) entity to start watering. This should be a reference to a zone switch entity minutes - number of minutes to water for |
Start watering a zone for a specific number of minutes |
bhyve.stop_watering |
entity_id - zone(s) entity to stop watering. This should be a reference to a zone switch entity |
Stop watering a zone |
bhyve.enable_rain_delay |
entity_id - device to enable a rain delay. This can reference either a zone or rain delay switch hours - number of hours to enable a rain delay |
Enable a rain delay for a device for a specified number of hours |
bhyve.disable_rain_delay |
entity_id - device to enable a rain delay. This can reference either a zone or rain delay switch |
Cancel a rain delay on a given device |
bhyve.set_manual_preset_runtime |
entity_id - zone(s) entity to set the preset runtime. This should be a reference to a zone switch entity minutes - number of minutes to water for |
Set the default time a switch is activated for when enabled. Support for this service appears to be patchy, and it has been difficult to identify under which conditions it works |
bhyve.set_smart_watering_soil_moisture |
entity_id - zone(s) entity to set the moisture level for. This should be a reference to a zone switch entity percentage - soil moisture level between 0 - 100 |
Set Smart Watering soil moisture level for a zone |
bhyve.start_program |
entity_id - program entity to start. This should be a reference to a program switch entity |
Starts a pre-configured watering program. Watering programs cannot be created nor configured via this integration, and require the B-Hyve app to create or modify |
Bundled in this repository is a python_script which calculates a device's next watering time and when a rain delay is scheduled to finish.
Note: HACS does not install the script automatically and they must be added manually to your HA instance.
Calculates:
- When the next scheduled watering is for a zone by considering all enabled watering programs
- When a device's active rain delay will finish, or
Noneif there is no active delay
This script creates or updates entities named sensor.{zone_name}_next_watering and sensor.{device_name}_rain_delay_finishing.
Usage:
service: python_script.bhyve_next_watering
data:
entity_id: switch.backyard_zone| Argument | Type | Required | Notes |
|---|---|---|---|
entity_id |
string |
True |
The entity id for a zone switch. |
Hook these scripts up to automations to update as required:
automation:
- alias: B-hyve next watering & rain delay finishing updater
trigger:
- platform: state
entity_id: switch.backyard_zone, switch.rain_delay_lawn
- platform: homeassistant
event: start
action:
- service: python_script.bhyve_next_watering
data:
entity_id: switch.backyard_zoneTo debug this integration and provide device integration for future improvements, please enable debugging in Home Assistant's configuration.yaml
logger:
logs:
custom_components.bhyve: debug
pybhyve: debug