TonuinoProgrammer

Arduino Based NFC Programmer for the Tonuino Project

New Features

• Updated Code to Support Mifare Ultralight (PICC_TYPE_MIFARE_UL) as the TonUINO supports it
• DEBUG Mode can be toggled by sending the degug command
• New UI Mode. You can select between NORMAL - full UI on Console like orignal Sourcecode and TOOLBOX, which has a minimal UI to be used programmatically
• Support for the newer TonUINO Modes 7-9 (from .. to Modes)

Instructions

1. Clone the project git clone https://github.com/donschoof/TonuinoProgrammer.git or download https://github.com/donschoof/TonuinoProgrammer/raw/main/TonuinoProgrammer.ino directly.

2. Open TonuinoProgrammer.ino in Arduino IDE

3. Install the following Library in Arduino IDE

• https://github.com/miguelbalboa/rfid - MFRC522 by GithubCommunity@1.4.10

4. Select your Board (install through Board Manager if needed), check/edit the Pinout and flash it with Arduino IDE

Example Setup

1. Arduino Nano + MRFC522: https://discourse.voss.earth/t/tonuino-karten-programmer/12137

2. ESP32 + MRFC522

3.3V <-> 3.3V
GND <-> GND
D2 <-> RST
D18 <-> SCK
D19 <-> MISO
D21 <-> SDA
D23 <-> MOSI

Original Sourcecode

Thanks to Real_Kuno @ https://discourse.voss.earth/t/tonuino-karten-programmer/12137/3