Skip to content

DCCCommander is a C/C++ Arduino Library providing the foundation for implementing an NMRA-compliant DCC command station for model trains.

Notifications You must be signed in to change notification settings

drFerg/DCCCommander

Repository files navigation

DCCCommander

DCCCommander is an embedded library written in C/C++ that provides the foundation for implementing an NMRA DCC command station.

DCCCommander provides functions for various train and accessory related settings, including: setting a locomotive’s speed, activating functions, switching turnouts, and programming DCC decoders.

DCCCommander translates these commands into NMRA-compatible DCC packets for transmitting over the tracks. Packets are prioritzed dependent on their type and DCCCommander keeps track of packets that require long-term repeating in the background.

An interrupt service routine attached to TIMER1 (AVR) or MCPWM0 (ARM) takes these packets and injects the highest priority packet into the precision DCC waveform. This signal is suitable for amplification with your booster/power station/motor-controller.

Please note that the Arduino outputs are not capable of driving trains directly.

Currently, DCCCommander supports various Arduino devices including atmega168/328 variants, as well as the Yun and attiny.

Installation

To install, see the general instructions for Arduino library installation here: http://arduino.cc/en/Guide/Environment#libraries

Origins

DCCCommander is a heavily modified fork to CmdrArduino - https://github.com/Railstars/CmdrArduino

About

DCCCommander is a C/C++ Arduino Library providing the foundation for implementing an NMRA-compliant DCC command station for model trains.

Topics

Resources

Stars

Watchers

Forks

Packages

No packages published