httpupdate fails when WiFi is configured #11029
Description
Board
ESP32
Device Description
Custom hardware
Hardware Configuration
I2C devices
Version
v3.0.7
IDE Name
Visual Studio
Operating System
Windows
Flash frequency
40MHz
PSRAM enabled
no
Upload speed
91200
Description
When WiFi is configured with an IP, Gateway and subnet the http update code fails and returns
HTTP_UPDATE_FAILED Error (-1): HTTP error: connection refused
When WiFi is configured for dhcp (no configuration applied via WiFi.config(..)) it works correctly.
I have set the ip, gateway and subnet to the same values as reported when dhcp is used but the httpupdate still fails.
The update only fails when WiFi is configured.
Sketch
//if (!WiFi.config(localIP, localGateway, subnet)) {
// Serial.println("STA Failed to configure");
// apWifi = true;
//}
WiFi.begin(ssid.c_str(), pass.c_str());
Serial.print("Connected to ");
Serial.println(WiFi.SSID());
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
Serial.print("GW address: ");
Serial.println(WiFi.gatewayIP());
Serial.print("SN address: ");
Serial.println(WiFi.subnetMask());Debug Message
Connected to Terrapico
IP address: 192.168.0.194
GW address: 192.168.0.1
SN address: 255.255.255.0
Other Steps to Reproduce
No response
I have checked existing issues, online documentation and the Troubleshooting Guide
- I confirm I have checked existing issues, online documentation and Troubleshooting guide.