Fix unable to disable mach speed mode

[lukecologne]

Summary of Changes

• Fixes the issue after the 1.8.3 update where after switching to mach mode it was impossible to go back to normal mode

Example:

This was from cold and dark, but it happens when spawned on the runway as well. Latest master

With the fix

[tyler58546]

The button works fine for me without this fix.

[NathanInnes]

Works as intended.

[RikvanD1997]

I had this issue yesterday after getting to cruise after the FMA switched to 'MACH' mode. I was not on the latest master build though, rather one from around 5 days ago.

[CaptainStraw]

I had the same problem with the default A320. I think it's not a problem with this mod but with the official code.

[lukecologne]

Yes, pretty sure it is, but this fixes it. @tyler58546 are you sure? I know of at least two other people who have this bug, not including the ones that are in this thread

[DominikTV]

I had this issue too after I used the Travel To / fasttravel option (was using the mod)

[lukecologne]

See updated main post for a gif

[UncleClapton]

Confirmed working

[ErikNL80]

I have tested in the latest master branch. Flying at FL280. Speed switched to Mach. Cannot get it back to knots. See the image below:

[lukecologne]

See this:

It might be intended that when it switches to mach automatically, you cannot go back to speed mode. Someone should confirm this though

[ErikNL80]

When descending, speed changes back to knots, and then it works again... But still, I am wondering if this is correct behaviour.

[NathanInnes]

This seems to be broken again. Can't switch from Mach to knots.

[lukecologne]

On the ground? or while cruising? because the only thing I fixed was being unable to switch on the ground

[NathanInnes]

Mid flight at cruise is the only one I tested. I will be on the ground shortly to see if it changes

[Benjozork]

@DesertRick13 We cannot help you with 747 problems here.

[DesertRick13]

I wasn’t looking for help, I was showing a workaround to a problem that is common to both the 747 and the A 320. Thank you From: Benjamin Dupont [mailto:notifications@github.com] Sent: Tuesday, October 27, 2020 5:32 AM To: flybywiresim/a32nx <a32nx@noreply.github.com> Cc: DesertRick13 <Ricardoescondido@hotmail.com>; Mention <mention@noreply.github.com> Subject: Re: [flybywiresim/a32nx] Fix unable to disable mach speed mode (#739) @DesertRick13<https://github.com/DesertRick13> We cannot help you with 747 problems here. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub<#739 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AROXLERF3OWDNSW2CW64EUTSM24VBANCNFSM4RRFPT4Q>.