You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
v3.2.1 - ESPHome 2026.11 compatibility and MQTT without a CA bundle
#228
ESPectre 3.2.1 brings the Direct API add-on to ESPHome 2026.11 and lets SDK projects connect to a plaintext MQTT broker without bundling CA certificates.
Automated builds now cover ESP-IDF 6.1.1 and Arduino-ESP32 4.0.0.
ESPHome
Official firmware images use ESPHome 2026.11.0 and load the ESPectre external component.
SDK
Direct accepts espressif/mdns versions >=1.12.0,<1.16.0, including the 1.15.0 release used by ESPHome 2026.11.
mqtt:// works with the CA bundle disabled. mqtts:// requires CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y. If a connected client switches to mqtts:// without the bundle, the SDK closes the plaintext connection and reports the configuration error.
On ESP-IDF 6, the SDK keeps espressif/mqtt at 1.0.0. Version 1.1.0 fails to compile on ESP32-C5 with ESP-IDF 6.1.1.
On ESP-IDF 6.1.1, CI builds the full SDK on ESP32-C6. On ESP32-C5, it builds Direct and MQTT together with the CA bundle turned off. CI also compiles the Arduino MotionDetection example on all six supported chips with Arduino-ESP32 3.3.12 and 4.0.0.
Tools and integrations
CI uses esp-emu 1.2.0 on an explicit subnet. Eight Native and ESPHome images retain timestamped UART replay for detector parity. New firmware tests check Wi-Fi rollback on ESP32-C6 with the emulated clock and read the ESPHome example’s red motion and green idle states from a WS2812 model on ESP32-S3.
Device settings shows the connected access point's BSSID on devices that report it read-only, including ESPHome with Direct.
Monitor accepts a manually entered unicast destination MAC for raw Wi-Fi traffic on the same channel. The target can be a sensor outside discovery or another Wi-Fi device.
Opening Monitor after connecting now shows the device's current detection mode, packet spacing, and raw destination settings without a page reload.
The host-side analysis tool measures false and missed presence detections on paired recordings of an empty room and a person sitting still. See the analysis tools.
The web flasher moves to @improv-wifi/serial-sdk 3.0.0, the new name of the Improv Serial library.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
Uh oh!
There was an error while loading. Please reload this page.
ESPectre 3.2.1 brings the Direct API add-on to ESPHome 2026.11 and lets SDK projects connect to a plaintext MQTT broker without bundling CA certificates.
Automated builds now cover ESP-IDF 6.1.1 and Arduino-ESP32 4.0.0.
ESPHome
SDK
espressif/mdnsversions>=1.12.0,<1.16.0, including the 1.15.0 release used by ESPHome 2026.11.mqtt://works with the CA bundle disabled.mqtts://requiresCONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y. If a connected client switches tomqtts://without the bundle, the SDK closes the plaintext connection and reports the configuration error.espressif/mqttat 1.0.0. Version 1.1.0 fails to compile on ESP32-C5 with ESP-IDF 6.1.1.MotionDetectionexample on all six supported chips with Arduino-ESP32 3.3.12 and 4.0.0.Tools and integrations
CI uses esp-emu 1.2.0 on an explicit subnet. Eight Native and ESPHome images retain timestamped UART replay for detector parity. New firmware tests check Wi-Fi rollback on ESP32-C6 with the emulated clock and read the ESPHome example’s red motion and green idle states from a WS2812 model on ESP32-S3.
Device settings shows the connected access point's BSSID on devices that report it read-only, including ESPHome with Direct.
Monitor accepts a manually entered unicast destination MAC for raw Wi-Fi traffic on the same channel. The target can be a sensor outside discovery or another Wi-Fi device.
Opening Monitor after connecting now shows the device's current detection mode, packet spacing, and raw destination settings without a page reload.
The host-side analysis tool measures false and missed presence detections on paired recordings of an empty room and a person sitting still. See the analysis tools.
The web flasher moves to
@improv-wifi/serial-sdk3.0.0, the new name of the Improv Serial library.This discussion was created from the release v3.2.1 - ESPHome 2026.11 compatibility and MQTT without a CA bundle.
All reactions