Frustrated with the quality of free OBD2 software, I decided to write my own. This involved learning how the ELM327 interface works, and in the meantime I figured I'd simply provide an API to access the ELM327 device programmatically, which I can then wrap a UI around.
Note: This is a work in progress, please don't expect it to be complete.
It's also very poorly tested, using only the platforms and vehicles I had available. At this stage, that consists of:
- 1999 Holden Commodore VT Series II (LS1 Engine)
- 2007 Holden Cruze
- ELM327 device - Generic devices vary vastly in quality, so compatibility is not guaranteed.
- Python 2.7 or later (3.x support not guaranteed)
- pySerial
pyELM327 supports Python's Context Manager, so you can do stuff like this:
import elm327
with elm327.ELM327(2) as elm:
print elm.fetchBatteryLevel()
The argument 2 is the port, per the pySerial specifications (COM3 in this case). On Linux replace 2 with '/dev/ttyUSB0'. You can also specify the baud rate and other serial port options.
Other examples can be found in examples/
-
We don't cope with changing baudrates terribly well at all - need support for polling the baudrate so we can reset a device with a non-default baud rate. It works as long as nothing goes wrong.
-
Haven't tested DTC retrieval, because I haven't yet managed to throw a code on any of my cars. I might just unplug the MAF.
-
Need to implement proper exceptions.
-
Documentation is appalling.