USB A to C Adapter

[BuildNCode1]

Submission Checklist:

• [✔️] I am a current high school, middle school, or home schooled student.

  • [✔️] I am 18 or under
  • [✔️] I have filled out the verification form

• [✔️] I have joined the #electronics channel on Slack

• [✔️] I made this board from scratch, even if I followed a tutorial

• [✔️] I have followed the directions in README.md

  • [✔️] Created a folder under onboard/projects
  • [✔️] Filled out TEMPLATE.md as README.md inside your project folder
  • [✔️] Uploaded gerber.zip and schematic.pdf inside your project folder
  • [✔️] Created a folder called src and uploaded design files
  • [✔️] Uploaded screenshot of PCB order called cart.png with all costs included
  • [✔️] I am ordering the smallest batch size (ie. JLCPCB's smallest order is for 5 boards)
  • [✔️] If outside the US I've checked that I can afford the customs charges in my country (which isn't covered by the grant)

• [✔️] (Optional) This project is from a tutorial¹.

• (Optional) I'm in a FIRST (FRC, FTC, FLL, etc.) team. The number is: ____

Footnotes

1. Projects from a tutorial are 100% fine! We just want to ask so we can count how people are using tutorials. ↩

[prophetorpheus]

Hi, I'm Orpheus Leap! Here to help you review your PR.

projects/First_PCB:

Required files

✅	README.md	A description of your project
✅	cart.png
✅	gerber.zip
✅	schematic.pdf	Manually check schematic.pdf
✅	Source files - EasyEDA	Found both PCB and SCH files

You can view a render of your board over on gerber.zip/2d!

Happy OnBoarding!
_{This bot is a simpler helper for common submission types. If there's an error with this, please point it out and someone from the OnBoard team will look at it manually.}

[blazecoding2009]

Hey @BuildNCode1
It seems that you've deleted your files from your repository. If you'd like to get a grant, please put them back so that we can review them.

[BuildNCode1]

Hey @blazecoding2009 I had misnamed the files when I uploaded them. All I did was remove the files, rename them, and reupload the exact same files, just with the correct names. Can you still accept this or help me figure out another solution? thank you.

[blazecoding2009]

Hey
Yeah we can still accept this, let me go through your files and check

[blazecoding2009]

Hey @BuildNCode1

Thanks for submitting your PCB pull request for OnBoard! However, it looks like you took a picture of the cart ordering process instead of completing the checkout process. For us to have the full picture of pricing and the PCB your ordering, please follow the steps in this guide here or here:

1. Click "Secure Checkout": After adding your PCB to the cart
2. Enter your shipping information and add a coupon code if you have one, then click "Submit Order", do not add any payment options
3. Close that tab and open a new one to jlcpcb.com, then click "Order History" and take a screenshot. It should show all the details of your order.

Please take a screenshot of your unpaid order instead of a picture of your cart, and upload it as cart.png. This will allow us to spot any mistakes and give you ways to reduce the cost or customs fee. Congrats on making the PCB!

[BuildNCode1]

Ok, I have updated cart.png. Now we should be good, right?🤞

[blazecoding2009]

Ok, I have updated cart.png. Now we should be good, right?🤞

Looks like you've selected Standard Assembly, can you see if you can use economic? It's a lot cheaper and would allow you to use your grant for more projects like this

[blazecoding2009]

So once we are done resolving all the issues, will you guys just automatically print it? Or will you send the grant to me and then I order it?

We'll send a grant and then you order

[blazecoding2009]

Just took a look at your PCB and it looks like once its made, you won't be able to plug in a UCB C as the cable will get stuck on the PCB. Please fix that also please use the proper resistor values for the CC resistors and connect them to GROUND not VCC

[BuildNCode1]

Just took a look at your PCB and it looks like once its made, you won't be able to plug in a UCB C as the cable will get stuck on the PCB. Please fix that also please use the proper resistor values for the CC resistors and connect them to GROUND not VCC

Can you please tell me what resistance I should use? Because I followed this tutorial to a tee, and it said to use 22 kiloohms (k).

[blazecoding2009]

The CC resistor should be 5.1k ohm iirc

[BuildNCode1]

Thank you. I just reuploaded the new and improved version of the PCB.

[blazecoding2009]

Hey @BuildNCode1

There seem to be 2 projects here, would you mind removing the hacker card? You can reupload it once we're finished with this.

Thanks!

[BuildNCode1]

Hey @BuildNCode1

There seem to be 2 projects here, would you mind removing the hacker card? You can reupload it once we're finished with this.

Thanks!

Just deleted it!

[BuildNCode1]

What else do we have to do before you can send me the grant?

[blazecoding2009]

Would it be possible for you to upload another piece of ID or a recent report card?

[blazecoding2009]

Hey @BuildNCode1

I just sent your grant!