An Addition for the Spring Tool

[PabloJonesUK]

Hi Stefan , Just a Thought of an addition for the Spring option , if implemented it would give you the choice for circular, or Flat ones, and then lots of dimensons changes , your decision . Like the ones in photo below .. Cheers

[henmedia]

@PabloJonesUK thanks for the idea and the photo! The spring now has a Form setting: Coil as before, or Flat - a band that runs in waves across the plate and is printed lying down, like the ones in your picture. You can pick round waves, a zigzag or square turns, and an eye with a hole, a tab or nothing at each end, and set the number of bends, the band width, the length, how far the waves reach and the thickness. It is an exact body, so you can round or chamfer its edges too. It comes with the next release.

[henmedia]

@PabloJonesUK The flat spring is out now in layerling 1.128.0: choose Flat under Form on the spring, then pick the pattern and the ends. https://github.com/henmedia/layerling/releases/tag/v1.128.0