More SBC Board Models

[sergeibuilds]

Hi Stefan, firstly I just wanted to say what an amazing tool Layerling has become and the rapid changes and improvements are astonishing, thank you so much. I'm also a Tinkercad convert and I'm hoping to make a donation to this project as soon as I can.

I see that a few popular SBC boards have been added as shapes which is fantastic, would it be possible to add ones like the ESP32 Super Mini boards?

Maybe based on the very popular Seeed Studio XIAO ESP32C6

[henmedia]

@sergeibuilds thank you, I'm glad layerling works so well for you! The SBC boards were built by @plazmabokor, so I'd like to give him the first word here.

@plazmabokor would you like to add the Seeed Studio XIAO ESP32-C6 and an ESP32 Super Mini to the SBC boards?

If you'd like to support layerling: https://layerling.com/support.html

[plazmabokor]

Yes, gladly. I'll add the Seeed Studio XIAO ESP32-C6 from Seeed's dimension drawing, and the ESP32-C3 Super Mini and ESP32-C6 Super Mini as well. Since the Super Minis come from several makers, I'll first look for a drawing to take their sizes from and say in the PR where they come from. It will be a separate PR after the connector one I'm working on now.

[sergeibuilds]

Thank you so much, you guys are awesome!!

[grmonsey]

@plazmabokor First off excellent work!

But..... :)
Where's the love for Arduino UNO and NANO (and rarely the MEGA)?
I do use the pi and pizero, I also prototype a lot with the uno and nano.
This is more joke than anything, I already have models that I import for holes and such for the uno and the nano. It would be nice though.

(Yeah, I am the one the gripes about feature creep, I know)

[henmedia]

@grmonsey thanks for the idea, and for the humour! @plazmabokor, could you please have a look at whether the Arduino UNO and NANO (and maybe the MEGA) would fit in?

[plazmabokor]

Thanks for your interest; I’ll be able to continue the work on Friday evening...

[henmedia]

@grmonsey this is out now in layerling 1.146.0: the Arduino UNO R3 and Nano are in the SBC board shape, thanks to @plazmabokor.

[microenh]

Thanks for this feature. May I request adding the Raspberry Pi Pico series of boards?

[plazmabokor]

Thanks for your interest; I’ll be able to continue the work on Friday evening...

[plazmabokor]

Arduino UNO R3 and Arduino Nano (classic ATmega328) are now in the SBC board shape, from Arduino's own Eagle files — see PR #1377. Heights aren't in those files, so they're estimated and marked as such.

@microenh: the Raspberry Pi Pico isn't in this PR, but I'll add it later in a separate one.

[henmedia]

@plazmabokor, thanks for the Arduino UNO and Nano boards, and for marking the estimated heights.

[plazmabokor]

@microenh @grmonsey both are done and in PR #1400: the Raspberry Pi Pico, Pico W, Pico 2 and Pico 2 W (from Raspberry Pi's own STEP models), and the Arduino MEGA 2560 Rev3 (from Arduino's Eagle file, with the same stepped edge as the UNO). Heights the makers don't give are estimated and marked as such. Thanks for the suggestions!

[henmedia]

@microenh @grmonsey the Raspberry Pi Pico boards and the Arduino MEGA 2560 from @plazmabokor are out in layerling 1.148.0.