More hardware

[4Willy]

Add things like tactile switches (12x12) and (please) an ESP32-S3-feather

[henmedia]

@4Willy thank you for the ideas! The ESP32-S3 Feather would be one more board for the SBC-board shape, which @plazmabokor built: @plazmabokor, would you like to add it?

For the tactile switch: do you need the switch itself as a part, or the opening for a 12 x 12 mm switch in an enclosure? Tell me which, and for which switch (the exact model, if you have one), and I can see what fits.

If layerling is useful to you, a small donation helps me keep improving it. Thank you!

[4Willy]

I need the opening for the tactile switch. I want to put a hole for it inside an project I am making. Also in no way shape or from am i capable of designing a model of an ESP32-S3-feather, but it would be much appreciated. I got the tactile switches from adafruit. here is the link: https://www.adafruit.com/product/1010

Thank you

[henmedia]

@4Willy thanks for the details. You can make the opening with the shapes that are already there: add a Box as a hole, 12.3 x 12.3 mm (a little more than the switch body, so it slides in), and as high as the wall is thick. Set it where the switch should sit, then group it with your enclosure. If the switch has a round button on top, add a Cylinder as a hole for it in the same way, a little wider than the button. Once you have it right, select the group and use Save selection under Custom shapes in the shape library, and you can drop it into any design. The Feather is with @plazmabokor for now.

[henmedia]

@4Willy this is out now in layerling 1.146.0: the Adafruit ESP32-S3 Feather is in the SBC board shape, thanks to @plazmabokor. Its new Button reach makes RESET and BOOT reach through a lid or wall.

[plazmabokor]

I took this on: the Adafruit ESP32-S3 Feather is in PR #1377, built from Adafruit's EagleCAD PCB file and their official 3D model, so the outline, holes, parts and heights all come from Adafruit.

[henmedia]

@plazmabokor, thanks for taking the ESP32-S3 Feather, and for building it from Adafruit's own files.