Possible bug with Sketch and imported models

[aloarjr810]

A user in the Facebook group was having this issue, I was able to reproduce it. Importing some .stl or .obj files into Layerling then opening Sketch you either don't see the outline of the object or only a little piece of it. Heres a example using a benchy object is on workplane,

[henmedia]

@aloarjr810 thanks for passing this on and for reproducing it with the Benchy. The sketch outlined an imported model only by the part it stands on, so a Benchy showed just a strip of its keel, or even less. Now the sketch shows the model as it is seen from above, the whole boat, and new points snap to that outline. For a big model like the Benchy this takes about a second the first time you open the sketch. If a mesh is not closed (it has gaps in its surface), the sketch still shows only the face it stands on.

[henmedia]

@aloarjr810 this is out now in layerling 1.146.0: a sketch shows an imported model as it is seen from above, so the whole Benchy, and new points snap to that outline.