Repository navigation
Replies: 3 comments 3 replies
|
@robstern, thank you for the pictures and for describing it so carefully. Section plane stays put: the section view cuts the whole design, not the selected body, and the plane stays where you last left it, in your case at -79 mm, so it did not follow the new selection. The button Center puts it back in the middle of the design; you can also type the position. It is described in the user guide, chapter "View and workplane", under "Looking inside: the section view". The thread behind the cut: I could not reproduce it from the picture. Your plane is on axis Y at -79 mm, and I cannot tell whether that goes through the axis of the bolt or beside it. Could you post the design as a .lyl file here (Export window → LYL) and say which axis and position you chose? Then I can see what you see, also the head that turns see-through. Overlapping measures: you are right, the numbers do not move out of each other's way; I have noted it. |
|
@henmedia, I'm glad I was able to convey the difference between Layerling and Fusion. It just occurred to me, based on how you describe the Sectional View functionality, that all of the objects on the work plane need to be modified. Regarding your question about an object that is sectioned:
Here is another example. It is just a sphere centered inside a cube.
Another observation: I had Sectional view turned on. I grabbed a new shape and placed it on the hidden side of the Sectional View and for a second I was confused why it didn't appear. Only the measurements, resize and rotate handles are visible.
|





Uh oh!
There was an error while loading. Please reload this page.
I created a simple socket head bolt and then turned on section view.
The bolt is a solid object. As a solid object, I would not expect the section view to show the threads on the hidden side of the bolt. I would expect to see the result of cutting the bolt in half: a flat surface with the threads on the outside.
I do not understand why the threads on the hidden side of the bolt are displayed.
I don't have enough experience with other CAD software to know how the sectioned view of a solid object is displayed. I think it might be with a cross-hatch.
Additionally, part of the bolt head becomes transparent, allowing the grid line to show through.
I am not sure if this is the intended functionality.
Additionally, not included in the screenshot is a potential glitch - or my inexperience.
I created a square object next to the bolt. I then did a section view of the square. I then closed the section view. When I selected the bolt and then turned on section view again, the section view was still locked to the square. I was not able to get the section view to be of the bolt.
Not specifically related to section view: Measurements often overlap each other. In 2nd screenshot, the 17mm height is obscuring the 10mm depth.
All reactions