Helm Chart for Harbor

Notes: The master branch is in heavy development, please use the other stable versions instead. A highly available solution for Harbor based on chart can be find here. And refer to the guide to upgrade the existing deployment.

This repository, including the issues, focuses on deploying Harbor chart via helm. For functionality issues or Harbor questions, please open issues on goharbor/harbor

Introduction

This Helm chart installs Harbor in a Kubernetes cluster. Welcome to contribute to Helm Chart for Harbor.

Prerequisites

• Kubernetes cluster 1.20+
• Helm v3.2.0+

Installation

Add Helm repository

helm repo add harbor https://helm.goharbor.io

Configure the chart

The following items can be set via --set flag during installation or configured by editing the values.yaml directly (need to download the chart first).

Configure how to expose Harbor service

• Ingress: The ingress controller must be installed in the Kubernetes cluster. Notes: if TLS is disabled, the port must be included in the command when pulling/pushing images. Refer to issue #5291 for details.
• ClusterIP: Exposes the service on a cluster-internal IP. Choosing this value makes the service only reachable from within the cluster.
• NodePort: Exposes the service on each Node’s IP at a static port (the NodePort). You’ll be able to contact the NodePort service, from outside the cluster, by requesting NodeIP:NodePort.
• LoadBalancer: Exposes the service externally using a cloud provider’s load balancer.

Configure the external URL

The external URL for Harbor core service is used to:

1. populate the docker/helm commands showed on portal
2. populate the token service URL returned to docker/notary client

Format: protocol://domain[:port]. Usually:

• if service exposed via Ingress, the domain should be the value of expose.ingress.hosts.core
• if service exposed via ClusterIP, the domain should be the value of expose.clusterIP.name
• if service exposed via NodePort, the domain should be the IP address of one Kubernetes node
• if service exposed via LoadBalancer, set the domain as your own domain name and add a CNAME record to map the domain name to the one you got from the cloud provider

If Harbor is deployed behind the proxy, set it as the URL of proxy.

Configure how to persist data

• Disable: The data does not survive the termination of a pod.
• Persistent Volume Claim(default): A default StorageClass is needed in the Kubernetes cluster to dynamically provision the volumes. Specify another StorageClass in the storageClass or set existingClaim if you already have existing persistent volumes to use.
• External Storage(only for images and charts): For images and charts, the external storages are supported: azure, gcs, s3 swift and oss.

Configure the other items listed in configuration section

Install the chart

Install the Harbor helm chart with a release name my-release:

helm install my-release harbor/harbor

Uninstallation

To uninstall/delete the my-release deployment:

helm uninstall my-release

Configuration

The following table lists the configurable parameters of the Harbor chart and the default values.

Parameter	Description	Default
Expose
expose.type	How to expose the service: ingress, clusterIP, nodePort or loadBalancer, other values will be ignored and the creation of service will be skipped.	ingress
expose.tls.enabled	Enable TLS or not. Delete the ssl-redirect annotations in expose.ingress.annotations when TLS is disabled and expose.type is ingress. Note: if the expose.type is ingress and TLS is disabled, the port must be included in the command when pulling/pushing images. Refer to goharbor/harbor#5291 for details.	true
expose.tls.certSource	The source of the TLS certificate. Set as auto, secret or none and fill the information in the corresponding section: 1) auto: generate the TLS certificate automatically 2) secret: read the TLS certificate from the specified secret. The TLS certificate can be generated manually or by cert manager 3) none: configure no TLS certificate for the ingress. If the default TLS certificate is configured in the ingress controller, choose this option	auto
expose.tls.auto.commonName	The common name used to generate the certificate, it's necessary when the type isn't ingress
expose.tls.secret.secretName	The name of secret which contains keys named: tls.crt - the certificate; tls.key - the private key
expose.tls.secret.notarySecretName	The name of secret which contains keys named: tls.crt - the certificate; tls.key - the private key. Only needed when the expose.type is ingress
expose.ingress.hosts.core	The host of Harbor core service in ingress rule	core.harbor.domain
expose.ingress.hosts.notary	The host of Harbor Notary service in ingress rule	notary.harbor.domain
expose.ingress.controller	The ingress controller type. Currently supports default, gce, alb, f5-bigip and ncp	default
expose.ingress.kubeVersionOverride	Allows the ability to override the kubernetes version used while templating the ingress
expose.ingress.annotations	The annotations used commonly for ingresses
expose.ingress.harbor.annotations	The annotations specific to harbor ingress	{}
expose.ingress.harbor.labels	The labels specific to harbor ingress	{}
expose.ingress.notary.annotations	The annotations specific to notary ingress	{}
expose.ingress.notary.labels	The labels specific to notary ingress	{}
expose.clusterIP.name	The name of ClusterIP service	harbor
expose.clusterIP.annotations	The annotations attached to the ClusterIP service	{}
expose.clusterIP.ports.httpPort	The service port Harbor listens on when serving HTTP	80
expose.clusterIP.ports.httpsPort	The service port Harbor listens on when serving HTTPS	443
expose.clusterIP.ports.notaryPort	The service port Notary listens on. Only needed when notary.enabled is set to true	4443
expose.nodePort.name	The name of NodePort service	harbor
expose.nodePort.ports.http.port	The service port Harbor listens on when serving HTTP	80
expose.nodePort.ports.http.nodePort	The node port Harbor listens on when serving HTTP	30002
expose.nodePort.ports.https.port	The service port Harbor listens on when serving HTTPS	443
expose.nodePort.ports.https.nodePort	The node port Harbor listens on when serving HTTPS	30003
expose.nodePort.ports.notary.port	The service port Notary listens on. Only needed when notary.enabled is set to true	4443
expose.nodePort.ports.notary.nodePort	The node port Notary listens on. Only needed when notary.enabled is set to true	30004
expose.loadBalancer.name	The name of service	harbor
expose.loadBalancer.IP	The IP of the loadBalancer. It only works when loadBalancer supports assigning IP	""
expose.loadBalancer.ports.httpPort	The service port Harbor listens on when serving HTTP	80
expose.loadBalancer.ports.httpsPort	The service port Harbor listens on when serving HTTPS	30002
expose.loadBalancer.ports.notaryPort	The service port Notary listens on. Only needed when notary.enabled is set to true
expose.loadBalancer.annotations	The annotations attached to the loadBalancer service	{}
expose.loadBalancer.sourceRanges	List of IP address ranges to assign to loadBalancerSourceRanges	[]
Internal TLS
internalTLS.enabled	Enable TLS for the components (chartmuseum, core, jobservice, portal, registry, trivy)	false
internalTLS.certSource	Method to provide TLS for the components, options are auto, manual, secret.	auto
internalTLS.trustCa	The content of trust CA, only available when certSource is manual. Note: all the internal certificates of the components must be issued by this CA
internalTLS.core.secretName	The secret name for core component, only available when certSource is secret. The secret must contain keys named: ca.crt - the CA certificate which is used to issue internal key and crt pair for components and all Harbor components must be issued by the same CA, tls.crt - the content of the TLS cert file, tls.key - the content of the TLS key file.
internalTLS.core.crt	Content of core's TLS cert file, only available when certSource is manual
internalTLS.core.key	Content of core's TLS key file, only available when certSource is manual
internalTLS.jobservice.secretName	The secret name for jobservice component, only available when certSource is secret. The secret must contain keys named: ca.crt - the CA certificate which is used to issue internal key and crt pair for components and all Harbor components must be issued by the same CA, tls.crt - the content of the TLS cert file, tls.key - the content of the TLS key file.
internalTLS.jobservice.crt	Content of jobservice's TLS cert file, only available when certSource is manual
internalTLS.jobservice.key	Content of jobservice's TLS key file, only available when certSource is manual
internalTLS.registry.secretName	The secret name for registry component, only available when certSource is secret. The secret must contain keys named: ca.crt - the CA certificate which is used to issue internal key and crt pair for components and all Harbor components must be issued by the same CA, tls.crt - the content of the TLS cert file, tls.key - the content of the TLS key file.
internalTLS.registry.crt	Content of registry's TLS cert file, only available when certSource is manual
internalTLS.registry.key	Content of registry's TLS key file, only available when certSource is manual
internalTLS.portal.secretName	The secret name for portal component, only available when certSource is secret. The secret must contain keys named: ca.crt - the CA certificate which is used to issue internal key and crt pair for components and all Harbor components must be issued by the same CA, tls.crt - the content of the TLS cert file, tls.key - the content of the TLS key file.
internalTLS.portal.crt	Content of portal's TLS cert file, only available when certSource is manual
internalTLS.portal.key	Content of portal's TLS key file, only available when certSource is manual
internalTLS.chartmuseum.secretName	The secret name for chartmuseum component, only available when certSource is secret. The secret must contain keys named: ca.crt - the CA certificate which is used to issue internal key and crt pair for components and all Harbor components must be issued by the same CA, tls.crt - the content of the TLS cert file, tls.key - the content of the TLS key file.
internalTLS.chartmuseum.crt	Content of chartmuseum's TLS cert file, only available when certSource is manual
internalTLS.chartmuseum.key	Content of chartmuseum's TLS key file, only available when certSource is manual
internalTLS.trivy.secretName	The secret name for trivy component, only available when certSource is secret. The secret must contain keys named: ca.crt - the CA certificate which is used to issue internal key and crt pair for components and all Harbor components must be issued by the same CA, tls.crt - the content of the TLS cert file, tls.key - the content of the TLS key file.
internalTLS.trivy.crt	Content of trivy's TLS cert file, only available when certSource is manual
internalTLS.trivy.key	Content of trivy's TLS key file, only available when certSource is manual
IPFamily
ipFamily.ipv4.enabled	if cluster is ipv4 enabled, all ipv4 related configs will set correspondingly, but currently it only affects the nginx related components ｜ true
ipFamily.ipv6.enabled	if cluster is ipv6 enabled, all ipv6 related configs will set correspondingly, but currently it only affects the nginx related components ｜ true
Persistence
persistence.enabled	Enable the data persistence or not	true
persistence.resourcePolicy	Setting it to keep to avoid removing PVCs during a helm delete operation. Leaving it empty will delete PVCs after the chart deleted. Does not affect PVCs created for internal database and redis components.	keep
persistence.persistentVolumeClaim.registry.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components
persistence.persistentVolumeClaim.registry.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used (the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.registry.subPath	The sub path used in the volume
persistence.persistentVolumeClaim.registry.accessMode	The access mode of the volume	ReadWriteOnce
persistence.persistentVolumeClaim.registry.size	The size of the volume	5Gi
persistence.persistentVolumeClaim.registry.annotations	The annotations of the volume
persistence.persistentVolumeClaim.chartmuseum.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components
persistence.persistentVolumeClaim.chartmuseum.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used (the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.chartmuseum.subPath	The sub path used in the volume
persistence.persistentVolumeClaim.chartmuseum.accessMode	The access mode of the volume	ReadWriteOnce
persistence.persistentVolumeClaim.chartmuseum.size	The size of the volume	5Gi
persistence.persistentVolumeClaim.chartmuseum.annotations	The annotations of the volume
persistence.persistentVolumeClaim.jobservice.jobLog.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components.
persistence.persistentVolumeClaim.jobservice.jobLog.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used (the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.jobservice.jobLog.subPath	The sub path used in the volume
persistence.persistentVolumeClaim.jobservice.jobLog.accessMode	The access mode of the volume	ReadWriteOnce
persistence.persistentVolumeClaim.jobservice.jobLog.size	The size of the volume	1Gi
persistence.persistentVolumeClaim.jobservice.jobLog.annotations	The annotations of the volume
persistence.persistentVolumeClaim.jobservice.scanDataExports.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components.
persistence.persistentVolumeClaim.jobservice.scanDataExports.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used (the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.jobservice.scanDataExports.subPath	The sub path used in the volume
persistence.persistentVolumeClaim.jobservice.scanDataExports.accessMode	The access mode of the volume	ReadWriteOnce
persistence.persistentVolumeClaim.jobservice.scanDataExports.size	The size of the volume	1Gi
persistence.persistentVolumeClaim.jobservice.scanDataExports.annotations	The annotations of the volume
persistence.persistentVolumeClaim.database.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components. If external database is used, the setting will be ignored
persistence.persistentVolumeClaim.database.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used (the default). Set it to - to disable dynamic provisioning. If external database is used, the setting will be ignored
persistence.persistentVolumeClaim.database.subPath	The sub path used in the volume. If external database is used, the setting will be ignored
persistence.persistentVolumeClaim.database.accessMode	The access mode of the volume. If external database is used, the setting will be ignored	ReadWriteOnce
persistence.persistentVolumeClaim.database.size	The size of the volume. If external database is used, the setting will be ignored	1Gi
persistence.persistentVolumeClaim.database.annotations	The annotations of the volume
persistence.persistentVolumeClaim.redis.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components. If external Redis is used, the setting will be ignored
persistence.persistentVolumeClaim.redis.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used (the default). Set it to - to disable dynamic provisioning. If external Redis is used, the setting will be ignored
persistence.persistentVolumeClaim.redis.subPath	The sub path used in the volume. If external Redis is used, the setting will be ignored
persistence.persistentVolumeClaim.redis.accessMode	The access mode of the volume. If external Redis is used, the setting will be ignored	ReadWriteOnce
persistence.persistentVolumeClaim.redis.size	The size of the volume. If external Redis is used, the setting will be ignored	1Gi
persistence.persistentVolumeClaim.redis.annotations	The annotations of the volume
persistence.persistentVolumeClaim.trivy.existingClaim	Use the existing PVC which must be created manually before bound, and specify the subPath if the PVC is shared with other components
persistence.persistentVolumeClaim.trivy.storageClass	Specify the storageClass used to provision the volume. Or the default StorageClass will be used (the default). Set it to - to disable dynamic provisioning
persistence.persistentVolumeClaim.trivy.subPath	The sub path used in the volume
persistence.persistentVolumeClaim.trivy.accessMode	The access mode of the volume	ReadWriteOnce
persistence.persistentVolumeClaim.trivy.size	The size of the volume	1Gi
persistence.persistentVolumeClaim.trivy.annotations	The annotations of the volume
persistence.imageChartStorage.disableredirect	The configuration for managing redirects from content backends. For backends which not supported it (such as using minio for s3 storage type), please set it to true to disable redirects. Refer to the guide for more details	false
persistence.imageChartStorage.caBundleSecretName	Specify the caBundleSecretName if the storage service uses a self-signed certificate. The secret must contain keys named ca.crt which will be injected into the trust store of registry's and chartmuseum's containers.
persistence.imageChartStorage.type	The type of storage for images and charts: filesystem, azure, gcs, s3, swift or oss. The type must be filesystem if you want to use persistent volumes for registry and chartmuseum. Refer to the guide for more details	filesystem
persistence.imageChartStorage.gcs.existingSecret	An existing secret containing the gcs service account json key. The key must be gcs-key.json.	""
persistence.imageChartStorage.gcs.useWorkloadIdentity	A boolean to allow the use of workloadidentity in a GKE cluster. To use it, create a kubernetes service account and set the name in the key serviceAccountName of each component, then allow automounting the service account.	false
General
externalURL	The external URL for Harbor core service	https://core.harbor.domain
caBundleSecretName	The custom CA bundle secret name, the secret must contain key named "ca.crt" which will be injected into the trust store for chartmuseum, core, jobservice, registry, trivy components.
uaaSecretName	If using external UAA auth which has a self signed cert, you can provide a pre-created secret containing it under the key ca.crt.
imagePullPolicy	The image pull policy
imagePullSecrets	The imagePullSecrets names for all deployments
updateStrategy.type	The update strategy for deployments with persistent volumes(jobservice, registry and chartmuseum): RollingUpdate or Recreate. Set it as Recreate when RWM for volumes isn't supported	RollingUpdate
logLevel	The log level: debug, info, warning, error or fatal	info
harborAdminPassword	The initial password of Harbor admin. Change it from portal after launching Harbor	Harbor12345
existingSecretAdminPassword	The name of secret where admin password can be found.
existingSecretAdminPasswordKey	The name of the key in the secret where to find harbor admin password Harbor	HARBOR_ADMIN_PASSWORD
caSecretName	The name of the secret which contains key named ca.crt. Setting this enables the download link on portal to download the CA certificate when the certificate isn't generated automatically
secretKey	The key used for encryption. Must be a string of 16 chars	not-a-secure-key
existingSecretSecretKey	An existing secret containing the encoding secretKey	""
proxy.httpProxy	The URL of the HTTP proxy server
proxy.httpsProxy	The URL of the HTTPS proxy server
proxy.noProxy	The URLs that the proxy settings not apply to	127.0.0.1,localhost,.local,.internal
proxy.components	The component list that the proxy settings apply to	core, jobservice, trivy
enableMigrateHelmHook	Run the migration job via helm hook, if it is true, the database migration will be separated from harbor-core, run with a preupgrade job migration-job	false
Nginx (if service exposed via ingress, Nginx will not be used)
nginx.image.repository	Image repository	goharbor/nginx-photon
nginx.image.tag	Image tag	dev
nginx.replicas	The replica count	1
nginx.revisionHistoryLimit	The revision history limit	10
nginx.resources	The resources to allocate for container	undefined
nginx.automountServiceAccountToken	Mount serviceAccountToken?	false
nginx.nodeSelector	Node labels for pod assignment	{}
nginx.tolerations	Tolerations for pod assignment	[]
nginx.affinity	Node/Pod affinities	{}
nginx.podAnnotations	Annotations to add to the nginx pod	{}
nginx.priorityClassName	The priority class to run the pod as
Portal
portal.image.repository	Repository for portal image	goharbor/harbor-portal
portal.image.tag	Tag for portal image	dev
portal.replicas	The replica count	1
portal.revisionHistoryLimit	The revision history limit	10
portal.resources	The resources to allocate for container	undefined
portal.automountServiceAccountToken	Mount serviceAccountToken?	false
portal.nodeSelector	Node labels for pod assignment	{}
portal.tolerations	Tolerations for pod assignment	[]
portal.affinity	Node/Pod affinities	{}
portal.podAnnotations	Annotations to add to the portal pod	{}
portal.priorityClassName	The priority class to run the pod as
Core
core.image.repository	Repository for Harbor core image	goharbor/harbor-core
core.image.tag	Tag for Harbor core image	dev
core.replicas	The replica count	1
core.revisionHistoryLimit	The revision history limit	10
core.startupProbe.initialDelaySeconds	The initial delay in seconds for the startup probe	10
core.resources	The resources to allocate for container	undefined
core.automountServiceAccountToken	Mount serviceAccountToken?	false
core.nodeSelector	Node labels for pod assignment	{}
core.tolerations	Tolerations for pod assignment	[]
core.affinity	Node/Pod affinities	{}
core.podAnnotations	Annotations to add to the core pod	{}
core.serviceAnnotations	Annotations to add to the core service	{}
core.secret	Secret is used when core server communicates with other components. If a secret key is not specified, Helm will generate one. Must be a string of 16 chars.
core.secretName	Fill the name of a kubernetes secret if you want to use your own TLS certificate and private key for token encryption/decryption. The secret must contain keys named: tls.crt - the certificate and tls.key - the private key. The default key pair will be used if it isn't set
core.xsrfKey	The XSRF key. Will be generated automatically if it isn't specified
core.priorityClassName	The priority class to run the pod as
core.artifactPullAsyncFlushDuration	The time duration for async update artifact pull_time and repository pull_count
core.gdpr.deleteUser	Enable GDPR compliant user delete	false
Jobservice
jobservice.image.repository	Repository for jobservice image	goharbor/harbor-jobservice
jobservice.image.tag	Tag for jobservice image	dev
jobservice.replicas	The replica count	1
jobservice.revisionHistoryLimit	The revision history limit	10
jobservice.maxJobWorkers	The max job workers	10
jobservice.jobLoggers	The loggers for jobs: file, database or stdout	[file]
jobservice.loggerSweeperDuration	The jobLogger sweeper duration in days (ignored if jobLoggers is set to stdout)	14
jobservice.resources	The resources to allocate for container	undefined
jobservice.automountServiceAccountToken	Mount serviceAccountToken?	false
jobservice.nodeSelector	Node labels for pod assignment	{}
jobservice.tolerations	Tolerations for pod assignment	[]
jobservice.affinity	Node/Pod affinities	{}
jobservice.podAnnotations	Annotations to add to the jobservice pod	{}
jobservice.priorityClassName	The priority class to run the pod as
jobservice.secret	Secret is used when job service communicates with other components. If a secret key is not specified, Helm will generate one. Must be a string of 16 chars.
Registry
registry.registry.image.repository	Repository for registry image	goharbor/registry-photon
registry.registry.image.tag	Tag for registry image	dev
registry.registry.resources	The resources to allocate for container	undefined
registry.controller.image.repository	Repository for registry controller image	goharbor/harbor-registryctl
registry.controller.image.tag	Tag for registry controller image	dev
registry.controller.resources	The resources to allocate for container	undefined
registry.replicas	The replica count	1
registry.revisionHistoryLimit	The revision history limit	10
registry.nodeSelector	Node labels for pod assignment	{}
registry.automountServiceAccountToken	Mount serviceAccountToken?	false
registry.tolerations	Tolerations for pod assignment	[]
registry.affinity	Node/Pod affinities	{}
registry.middleware	Middleware is used to add support for a CDN between backend storage and docker pull recipient. See official docs.
registry.podAnnotations	Annotations to add to the registry pod	{}
registry.priorityClassName	The priority class to run the pod as
registry.secret	Secret is used to secure the upload state from client and registry storage backend. See official docs. If a secret key is not specified, Helm will generate one. Must be a string of 16 chars.
registry.credentials.username	The username for accessing the registry instance, which is hosted by htpasswd auth mode. More details see official docs.	harbor_registry_user
registry.credentials.password	The password for accessing the registry instance, which is hosted by htpasswd auth mode. More details see official docs. It is suggested you update this value before installation.	harbor_registry_password
registry.credentials.existingSecret	An existing secret for accessing the registry instance hosted by htpasswd auth mode. Secret keys must be REGISTRY_PASSWD and REGISTRY_HTPASSWD. For key REGISTRY_PASSWD the value is the password. For key REGISTRY_HTPASSWD the value is the string in the password file generated by htpasswd where the username is harbor_registry_user and the encryption type is bcrypt. For example: htpasswd -bBc passwordfile harbor_registry_user harbor_registry_password. The username must be harbor_registry_user! More details see official docs.	""
registry.credentials.htpasswdString	Login and password in htpasswd string format. Excludes registry.credentials.username and registry.credentials.password. May come in handy when integrating with tools like argocd or flux. This allows the same line to be generated each time the template is rendered, instead of the htpasswd function from helm, which generates different lines each time because of the salt.	undefined
registry.relativeurls	If true, the registry returns relative URLs in Location headers. The client is responsible for resolving the correct URL. Needed if harbor is behind a reverse proxy	false
registry.upload_purging.enabled	If true, enable purge _upload directories	true
registry.upload_purging.age	Remove files in _upload directories which exist for a period of time, default is one week.	168h
registry.upload_purging.interval	The interval of the purge operations	24h
registry.upload_purging.dryrun	If true, enable dryrun for purging _upload, default false	false
Chartmuseum
chartmuseum.enabled	Enable chartmusuem to store chart	true
chartmuseum.absoluteUrl	If true, ChartMuseum will return absolute URLs. The default behavior is to return relative URLs	false
chartmuseum.image.repository	Repository for chartmuseum image	goharbor/chartmuseum-photon
chartmuseum.image.tag	Tag for chartmuseum image	dev
chartmuseum.replicas	The replica count	1
chartmuseum.revisionHistoryLimit	The revision history limit	10
chartmuseum.resources	The resources to allocate for container	undefined
chartmuseum.automountServiceAccountToken	Mount serviceAccountToken?	false
chartmuseum.nodeSelector	Node labels for pod assignment	{}
chartmuseum.tolerations	Tolerations for pod assignment	[]
chartmuseum.affinity	Node/Pod affinities	{}
chartmuseum.podAnnotations	Annotations to add to the chart museum pod	{}
chartmuseum.priorityClassName	The priority class to run the pod as
Trivy
trivy.enabled	The flag to enable Trivy scanner	true
trivy.image.repository	Repository for Trivy adapter image	goharbor/trivy-adapter-photon
trivy.image.tag	Tag for Trivy adapter image	dev
trivy.resources	The resources to allocate for Trivy adapter container
trivy.automountServiceAccountToken	Mount serviceAccountToken?	false
trivy.replicas	The number of Pod replicas	1
trivy.debugMode	The flag to enable Trivy debug mode	false
trivy.vulnType	Comma-separated list of vulnerability types. Possible values os and library.	os,library
trivy.severity	Comma-separated list of severities to be checked	UNKNOWN,LOW,MEDIUM,HIGH,CRITICAL
trivy.ignoreUnfixed	The flag to display only fixed vulnerabilities	false
trivy.insecure	The flag to skip verifying registry certificate	false
trivy.skipUpdate	The flag to disable Trivy DB downloads from GitHub	false
trivy.offlineScan	The flag prevents Trivy from sending API requests to identify dependencies.	false
trivy.securityCheck	Comma-separated list of what security issues to detect. Possible values are vuln, config and secret.	vuln
trivy.timeout	The duration to wait for scan completion	5m0s
trivy.gitHubToken	The GitHub access token to download Trivy DB (see GitHub rate limiting)
trivy.priorityClassName	The priority class to run the pod as
Notary
notary.enabled	Enable Notary?	true
notary.server.image.repository	Repository for notary server image	goharbor/notary-server-photon
notary.server.image.tag	Tag for notary server image	dev
notary.server.replicas	The replica count	1
notary.server.resources	The resources to allocate for container	undefined
notary.server.priorityClassName	The priority class to run the pod as
notary.server.automountServiceAccountToken	Mount serviceAccountToken?	false
notary.signer.image.repository	Repository for notary signer image	goharbor/notary-signer-photon
notary.signer.image.tag	Tag for notary signer image	dev
notary.signer.replicas	The replica count	1
notary.signer.resources	The resources to allocate for container	undefined
notary.signer.priorityClassName	The priority class to run the pod as
notary.signer.automountServiceAccountToken	Mount serviceAccountToken?	false
notary.nodeSelector	Node labels for pod assignment	{}
notary.tolerations	Tolerations for pod assignment	[]
notary.affinity	Node/Pod affinities	{}
notary.podAnnotations	Annotations to add to the notary pod	{}
notary.serviceAnnotations	Annotations to add to the notary service	{}
notary.secretName	Fill the name of a kubernetes secret if you want to use your own TLS certificate authority, certificate and private key for notary communications. The secret must contain keys named tls.ca, tls.crt and tls.key that contain the CA, certificate and private key. They will be generated if not set.
Database
database.type	If external database is used, set it to external	internal
database.internal.image.repository	Repository for database image	goharbor/harbor-db
database.internal.image.tag	Tag for database image	dev
database.internal.password	The password for database	changeit
database.internal.shmSizeLimit	The limit for the size of shared memory for internal PostgreSQL, conventionally it's around 50% of the memory limit of the container	512Mi
database.internal.resources	The resources to allocate for container	undefined
database.internal.automountServiceAccountToken	Mount serviceAccountToken?	false
database.internal.initContainer.migrator.resources	The resources to allocate for the database migrator initContainer	undefined
database.internal.initContainer.permissions.resources	The resources to allocate for the database permissions initContainer	undefined
database.internal.nodeSelector	Node labels for pod assignment	{}
database.internal.tolerations	Tolerations for pod assignment	[]
database.internal.affinity	Node/Pod affinities	{}
database.internal.priorityClassName	The priority class to run the pod as
database.internal.livenessProbe.timeoutSeconds	The timeout used in liveness probe; 1 to 5 seconds	1
database.internal.readinessProbe.timeoutSeconds	The timeout used in readiness probe; 1 to 5 seconds	1
database.external.host	The hostname of external database	192.168.0.1
database.external.port	The port of external database	5432
database.external.username	The username of external database	user
database.external.password	The password of external database	password
database.external.coreDatabase	The database used by core service	registry
database.external.notaryServerDatabase	The database used by Notary server	notary_server
database.external.notarySignerDatabase	The database used by Notary signer	notary_signer
database.external.existingSecret	An existing password containing the database password. the key must be password.	""
database.external.sslmode	Connection method of external database (require, verify-full, verify-ca, disable)	disable
database.maxIdleConns	The maximum number of connections in the idle connection pool. If it <=0, no idle connections are retained.	50
database.maxOpenConns	The maximum number of open connections to the database. If it <= 0, then there is no limit on the number of open connections.	100
database.podAnnotations	Annotations to add to the database pod	{}
Redis
redis.type	If external redis is used, set it to external	internal
redis.internal.image.repository	Repository for redis image	goharbor/redis-photon
redis.internal.image.tag	Tag for redis image	dev
redis.internal.resources	The resources to allocate for container	undefined
redis.internal.automountServiceAccountToken	Mount serviceAccountToken?	false
redis.internal.nodeSelector	Node labels for pod assignment	{}
redis.internal.tolerations	Tolerations for pod assignment	[]
redis.internal.affinity	Node/Pod affinities	{}
redis.internal.priorityClassName	The priority class to run the pod as
redis.external.addr	The addr of external Redis: <host_redis>:<port_redis>. When using sentinel, it should be <host_sentinel1>:<port_sentinel1>,<host_sentinel2>:<port_sentinel2>,<host_sentinel3>:<port_sentinel3>	192.168.0.2:6379
redis.external.sentinelMasterSet	The name of the set of Redis instances to monitor
redis.external.coreDatabaseIndex	The database index for core	0
redis.external.jobserviceDatabaseIndex	The database index for jobservice	1
redis.external.registryDatabaseIndex	The database index for registry	2
redis.external.chartmuseumDatabaseIndex	The database index for chartmuseum	3
redis.external.trivyAdapterIndex	The database index for trivy adapter	5
redis.external.password	The password of external Redis
redis.external.existingSecret	Use an existing secret to connect to redis. The key must be REDIS_PASSWORD.	""
redis.podAnnotations	Annotations to add to the redis pod	{}
Exporter
exporter.replicas	The replica count	1
exporter.revisionHistoryLimit	The revision history limit	10
exporter.podAnnotations	Annotations to add to the exporter pod	{}
exporter.image.repository	Repository for redis image	goharbor/harbor-exporter
exporter.image.tag	Tag for exporter image	dev
exporter.nodeSelector	Node labels for pod assignment	{}
exporter.tolerations	Tolerations for pod assignment	[]
exporter.affinity	Node/Pod affinities	{}
exporter.automountServiceAccountToken	Mount serviceAccountToken?	false
exporter.cacheDuration	the cache duration for information that exporter collected from Harbor	30
exporter.cacheCleanInterval	cache clean interval for information that exporter collected from Harbor	14400
exporter.priorityClassName	The priority class to run the pod as
Metrics
metrics.enabled	if enable harbor metrics	false
metrics.core.path	the url path for core metrics	/metrics
metrics.core.port	the port for core metrics	8001
metrics.registry.path	the url path for registry metrics	/metrics
metrics.registry.port	the port for registry metrics	8001
metrics.exporter.path	the url path for exporter metrics	/metrics
metrics.exporter.port	the port for exporter metrics	8001
metrics.serviceMonitor.enabled	create prometheus serviceMonitor. Requires prometheus CRD's	false
metrics.serviceMonitor.additionalLabels	additional labels to upsert to the manifest	""
metrics.serviceMonitor.interval	scrape period for harbor metrics	""
metrics.serviceMonitor.metricRelabelings	metrics relabel to add/mod/del before ingestion	[]
metrics.serviceMonitor.relabelings	relabels to add/mod/del to sample before scrape	[]
Trace
trace.enabled	Enable tracing or not	false
trace.provider	The tracing provider: jaeger or otel. jaeger should be 1.26+	jaeger
trace.sample_rate	Set sample_rate to 1 if you want sampling 100% of trace data; set 0.5 if you want sampling 50% of trace data, and so forth	1
trace.namespace	Namespace used to differentiate different harbor services
trace.attributes	attributes is a key value dict contains user defined attributes used to initialize trace provider
trace.jaeger.endpoint	The endpoint of jaeger	http://hostname:14268/api/traces
trace.jaeger.username	The username of jaeger
trace.jaeger.password	The password of jaeger
trace.jaeger.agent_host	The agent host of jaeger
trace.jaeger.agent_port	The agent port of jaeger	6831
trace.otel.endpoint	The endpoint of otel	hostname:4318
trace.otel.url_path	The URL path of otel	/v1/traces
trace.otel.compression	Whether enable compression or not for otel	false
trace.otel.insecure	Whether establish insecure connection or not for otel	true
trace.otel.timeout	The timeout in seconds of otel	10
Cache
cache.enabled	Enable cache layer or not	false
cache.expireHours	The expire hours of cache layer	24